REPAIR MAINT TO AC SHEETS CGI SHEETS GALVALUME SHEETS CEILING ROOF TREATMENT AND CERTAIN BR REPAIR WORK IN MD CIVILIAN ACCN IN POCKET 9 SAHARANPUR IN AGE BR III UNDER GE ROORKEE

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) using course sand confirming to IS 2116-1980 complete all as specified and directed.

All as per item No 2 above but except bricks complete all as specified and directed .

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L Rendering 15 mm thick in CM 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including preparation of new plaster surfaces of wall and applying three coats white wash complete all as specified and directed.

M & L for rendering 12mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement and preparation of new plaster surfaces of wall and applying three coats of white washcomplete all as specified and directed.

Demolition of cement concrete etc (un-reinforced) of any description along with sub base in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, path and the like, including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Coloured (Digital colour) non-skid ceramic joint free coloured tiles 7 to 8 mm thick (Square / rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC roof sheeting complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC roof sheeting complete all as specified and directed.

Dismantling timber scantling fixed in framed work in any position in fillets, rails, post, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed.

M&L for mild steel framed work as in roof trusses (framed), trussed purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing using beam, tee, angle, channel or hollow section conforming to Fe 410-W Gde E- 250 quality A including distance pieces, base plate, nuts/ bolts, cleats etc complete all as specified and directed.

S&F powder coated Everest ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick everest designer ceiling (E- board clasic) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling including plugging in brick wall/concrete surface with steel rawl plugs @ 600 mm c/c including dismantling unserviceable false ceiling complete all as specified and directed.

Taking down chowkhat or frame with shutters ( (without taking off shutters from the frame wooden/ steel) n.exc 1.50 Sqm complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed .

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe- 290 (Gde E- 165) complete all as specified and directed.

S&F 35 mm thick factory made flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauze etc (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc sizes of members of shutter as specified in SSR-2009 Part I section 8 clause 8.24 (a), supplied and fitted to chowkhat complete all as specified and directed.

S&F IInd class HW, factory made 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifed and directed.

S&F 100mm size mild steel butt hinges, ISI marked medium weight cold rolled, fixed to wooden chowkhat with screws or welded to steel frame at any floor upto four storied buildings and making functional complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified and directed.

S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S & F factory made Steel windows with side hung shutters incl projection type hinges with steel handles and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.

S & F factory made Steel windows with side hung shutters incl projection type hinges with steel handles and steel peg stay without glazing bars dovetailed or welded complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, in wooden / steel frame complete all as specified and directed .

S&F 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment laid dry over a layer of 25 mm thick sand cushioning complete all as specified and directed.

S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including connection etc including taking down old tubing complete all as specified and directed.

S&F in repairs, 20mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified complete all as specified and directed.

Dismantling and taking down existing water tank and S&F Rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) triple layer of 500 Ltrs capacity including GI nipple of size 100mm long 20/15mm dia and 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

SR CONSTRUCTIONS

JBN CONSTRUCTION

G.H. INFRASTRUCTURE PRIVATE LIMITED

Alankar Traders

RAM PRAKASH AND ASSOCIATES

AMARJEET SINGH AND CO.

TANUJ SAINI CONTRACTOR

ANKIT KUMAR