Planning, designing and execution of Interior Works for Ground floor Setting of SIDBI at CHENNAI

S NO DESCRIPTION AMOUNT AMOUNT

2.00 SANITARY/ PLUMBING WORKS 71,209.55 5,00,808.00

3.00 ELECTRICAL WORKS 6,83,602.40 2,18,862.00

6.00 CCTV WORKS 62,180.00

8.00 FURNITURE 19,20,016.00

TOTAL COST 27,85,632.98

Reduce GST MF as per CPWD OM dated

Total (DSR +MR) 76,47,406.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

1.00 FLOORING WORKS DSR NON DSR

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work

1.01 4.1 upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 2.00 cu m 6,326.05 12,652.10

SOLID POLIMER COMPOSITE OR VENYLE FLOORING: Providing and Fixing of floor tiles with 5 mm with wear layer is of 0.5mm,

made upof Stone Polymer composite, 100% Water & Termite proof, Scratch/ Flame/ UV resistant, anti-microbial, 100%

recyclable Green product having click system with suitable skirting. Classification of abrasion resistance (Abrasion

wheelfromH-18 Calibrade, loadApplied 1000 grams, No. of Cycles 14,400). " ( Along with Matching Profiles)

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on

11.41A 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting -

the joints with white cement and matching pigments etc., complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st

quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

1.04 11.4 cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with 38.12 sq m 1,439.40 54,864.17

white cement and matching pigment etc.,., complete.

TOTAL FLOORING WORKS 4,11,084.54 1,15,520.00

2.00 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per

IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wie horizontal tubes will be welded with CO2 MIG welding process confirming to IS 816 and

ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture on a Robotic welding machine to ensure adequate

2.01 12.45 welding strength with consistency.• The legs will be connected with Cross beams to take care of the bending stress

catering.• The number of cross beams will be based on the depth of the table. The Cross Beams are made of 40x20 mm ERW

• The Engineering plastic components will be made with Acrylonitrile butadiene styrene (ABS) which are confirming to ASTM

D256 for Izod Impact (1/4”) for Leg shoe and levelers.

Wire Management - 1 NOS of 450 mm Flipup for Power and Data and Vetebra for Wire Entry.Cable Trays will be provided

when the cable access is required from the top through ‘Flip ups”. The Switch/socket slots are provided as a part of the “Flip

Up” design just below the flip covers.

The “flip up” should be made in aluminum flip covers with soft closing arrangement. The

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing mineral fiber false ceiling With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

2.02 MR tile m 595x595 moisture resistance frame made glavinised silhoute section as per approved make direction of engineer in- 120.00 sq m 2,650.00 3,18,000.00

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per

2.06 MR details of Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm 17.00 RM 850.00 14,450.00

TOTAL FALSE CEILING WORKS 2,98,276.00 3,32,450.00

2 Digitally signed by AMIT

3.00 WALL FINISHES WORKS

GLASS PARTITION Providing and fixing framedglass door/glass partition wherever required 10 mm thickness including all

3.01 MR fittings, frames etc. as per direction of EIC( complete excluding doors hardware) 20.00 sq m 4600 92,000.00

WALL PANELING :-Providing and fixing Paneling upto ceiling height consisting of Aluminium frame and required board, frame

work made of Aluminium section made of 50x25x2mm mm minimum 2mm thicknes , consisting of floor and ceiling channel

50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre

to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs

and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with

nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall

screws on studs, floor and ceiling channels at the spacine horizontal tubes will be welded with CO2 MIG welding process

confirming to IS 816 and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture on a Robotic welding machine

to ensure adequate welding strength with consistency.• The legs will be connected with Cross beams to take care of the

bending stress catering.• The number of cross beams will be based on the depth of the table. The Cross Beams are made of

40x20 mm ERW tubes- 16 g.

• The Engineering plastic components will be made with Acrylonitrile butadiene styrene (ABS) which are confirming to ASTM

D256 for Izod Impact (1/4”) for Leg shoe and

Paneling with 12 mm thick HDHMR board to IS: 5509 40.00 sq m 2,850.00 1,14,000.00

WALL PARTITION-Providing and fixing partition upto ceiling height consisting of Aluminium frame and required board, frame

work made of Aluminium section made of 50x25 mm, 2 mm thicknes , consisting of floor and ceiling channel 50mm wide

having equal flanges of 25 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of

floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of

studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing

of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 e horizontal tubes will be welded with CO2 MIG welding process confirming to IS 816

and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture on a Robotic welding machine to ensure adequate

welding strength with consistency.• The legs will be connected with Cross beams to take care of the bending stress

catering.• The number of cross beams will be based on the depth of the table. The Cross Beams are made of 40x20 mm ERW

• The Engineering plastic components will be made with Acrylonitrile butadiene styrene (ABS) which are confirming to ASTM

D256 for Izod Impact (1/4”) for Leg

Both side 11-12 mm thick HDHMR board to IS: 5509 60.00 sq m 3,850.00 2,31,000.00

4mm THICK MDF BOARD with 1 mm thick laminate : Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails,

including a coat of approved primer on one face, and fixed on wooden/ steel frame work, complete as per direction of

3.04 MR Engineer-in-Charge

4mm thick MDF Board with 1 mm thick laminate : 100.00 SQM 2,150.00 2,15,000.00

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce

Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs

3.05 MR (indoors) must be endorsed by 3M India Limited Architectural Market Department. Contractors payment wouldn't be 20.00 SQM 2,950.00 59,000.00

released until & unless he/she produces orginal warranty certificate from the manufacturer.

THERMAL INSULATION: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having

3.09 12.57 density 24 kg/m3, 50mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held 60.00 SQM 358.50 21,510.00

in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener -

3.12 shall be paid for separately).

9.1.1 Second class teak wood 0.50 cu m 1,42,949.70 71,474.85

3 Digitally signed by AMIT

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with -

3.14 vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 8.00 SQM 2,392.65 19,141.20

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush

3.15 9.23 door shutters (over all area of door shutter to be measured). 8.00 SQM 462.35 3,698.80

Providing and Fixing ESDH 22x600mm H-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved

3.16 MR make and model all complete as per the direction of Engineer-in-charge. 7.00 Each 4,650.00 32,550.00

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all

3.17 MR complete as per the direction of Engineer-in-charge. 2.00 Each 2,750.00 5,500.00

Providing and Fixing FH-943 Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg.

Maximum door width 950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested

with 5 Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of

Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs

3.19 9.53 and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 12.00 EACH 228.85 2,746.20

20mm nominal size).

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door

3.20 9.82 stopper with necessary screws, etc. complete. 2.00 Each 121.65 243.30

Providing and Fixing EFS ACC-001,002 top and Bottom Strap of approved make and model all complete as per the direction

3.21 MR of Engineer-in-charge. 7.00 Each 3,550.00 24,850.00

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per

3.22 MR the direction of Engineer-in-charge. 2.00 Each 1,650.00 3,300.00

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of ZEBRA

BLINDS comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .Thetear

resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy

and safe installation, moulded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball

chain pulley with ball chain and can be positioned at right side or left hand side of the Shade. The Shade when lowering or

raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of plastic witha steel

location pin.The plug shall be inserX (D) 900mm X (H)750mm overall Side Runer Dimension (L)1200mm X (D) 450mm X (H)

675mmthe main table by 2 nos special Aluminum extruded brackets. The modesty will be fixed 150 mm from the edge of the

Wire Management:Continuous PVC Cable Tray with provision to mount switches and sockets as per client requirement.

Vertical wire entry cover for wire uptake from floor to cable tray and 300mm Aluminium Flip Up for swicth access.

Legs and Supports:- The MS supports are made of 50 x50mm square ERW tubes- 16g with levelers to cater for floor undulations-

+/- 20 mm. ERW Tube confirming to IS 4923 : 1997 – 16g. Main leg members will be connected through a horizontal member

size 1.6mm thk, 50x25 cold formed ERW tube confirming to IS 4923: 1997. The vertical and the horizontal tubes will be welded

with CO2 MIG welding process confirming to IS 816 and ISO 9692-2. The leg wi

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth

6.13 level up to floor V level. -

6.13.2 Cement mortar 1: 4 (1 cement: 4 coarse sand) 4.00 Sqm 1,123.80 4,495.20

3.24 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 4.00 Sqm 104.80 419.20

13.4 12 mm cement plaster of mix : -

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and

4 Digitally signed by AMIT

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound )

13.85 content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : -

13.60.1 Two or more coats on new work 400.00 SQM 137.85 55,140.00

TOTAL WALL FINISHING WORKS - 2,63,560.65 10,18,588.00

4.00 MISCELLANEOUS WORKS -

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters

and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply, all ply to be laminated with 0.8 mm laminate.All

shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick

PVC edge banding, All Shutters finished in high gloss acrylic of approved. The cabinet boxes of floor units will be supported

4.01 MR by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed aluminum finish attached by 1.00 Sqm 20,179.00 20,179.00

hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only

front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabie

horizontal tubes will be welded with CO2 MIG welding process confirming to IS 816 and ISO 9692-2. The leg will be fabricated

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters

and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm

laminate.All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick

4.02 MR PVC edge banding, All Shutters finished in high gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using 1.00 Sqm 13,452.00 13,452.00

metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall

be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to

1000X560X710MM (approx.) and join together as per site requirements etc.

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of

W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in

4.03 22.3 recommended proportion including rounding off junction of vertical and horizontal surface. 15.00 SQM 769.60 11,544.00

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each

other with bitumen @ 1.7 kg/sqm).

4.04 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following

process in the sequence as detailed below:

The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. -

Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for

On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required

proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further

allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish 2.00 Sqm 3,049.85 6,099.70

and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done

in 1 or 2 layers without gap of time.)

TOTAL MISCELLANEOUS WORKS 17,643.70 33,631.00

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO TOTAL AMOUNT TOTAL AMOUNT

S NO TOTAL AMOUNT TOTAL AMOUNT

NO DESCRIPTION UNIT QUANTITY RATE

5 Digitally signed by AMIT

###### DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN MIXER (WALL MOUNTED) WITH SPOUT

MR 1 (COMPOSITE ONE PIECE BODY) EACH 5 12,500.00 62,500.00

MR 2 Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630x460x130mm EACH 5 8625.00 43,125.00

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING 32MM- FULL THREAD- WITH CERAMIC

MR 3 CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 5 1800.00 9,000.00

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL PARTITION) 32mm SIZE WITH 300mm & 190mm

MR 4 LONG WALL CONNECTION PIPES & WALL FLANGE EACH 5 2075.00 10,375.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL HUNG WC WITH UF SOFT CLOSE SLIM SEAT

MR 5 COVER, HINGES AND ACCESSORIES SET, SIZE: 375X520X400 MM EACH 5 20000.00 1,00,000.00

MR 7 Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL FLANGE EACH 4 1200.00 4,800.00

MR 8 Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH ADJUSTABLE WITH WALL FLANGE 15mm EACH 4 2400.00 9,600.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE

AND WALL HOOK ALD-CHR-573 or equivalent

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to

17.31 12 wooden cleats with C.P. brass screws and washers complete. SQM 4 1,607.95 6,431.80

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 20 416.80 8,336.00

18.78 16 Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. METRE 5 202.90 1,014.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in

Internal work - Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good

the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 12 497.80 5,973.60

18.8.2 20mm nominal outer dia pipes METRE 50 537.60 26,880.00

18.8.3 25mm nominal outer dia pipes METRE 30 627.25 18,817.50

18.8.4 32mm nominal outer dia pipes METRE 4 739.30 2,957.20

18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 0

18.51.1 15 mm nominal bore EACH 1 798.95 798.95

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per 0

IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees,

junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings,

clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor

& basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils,

suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement

concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper

completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The

MR rubbe horizontal tubes will be welded

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost 0

will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications

and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 12.00 700 8,400.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 12.00 600 7,200.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste

pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling

MR 21 level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement

concrete 1:2:4 complete as required.

6 Digitally signed by AMIT

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. 0

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 8 536.00 4,288.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 8 726.00 5,808.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required

MR fitting complete as required. EACH 8 1,001.00 8,008.00

Supply, Installation, Testing and Commisiong of Soap Dispenser glass or plastic body as per approved by engineer in charge.

MR 25 Supply, Installation, of Towel Ring SS Finish Square or Ring type as per approved by engineer in charge. EACH 1 937.00 937.00

TOILET CUBICLES:- Providing and fixing Toilet cubical(of following standard dimension which includes 600mm door size

width) made up of thermosetting resign treated high pressure ,self supporting decorative compact laminates with

MR 26 permanently incorporate anti-bacterial agents(under JIS Z2801:2000 certification) during manufacturing

Toilet cubicle with standard dimension front 18mm thick with 2100mm(H) x 900(W), door size 600mm x 1830mm),

partition 12mm thick 1550mm depth x 1930mm(H) (including gap of 110mm) EACH 4 32,500.00 1,30,000.00

URINAL PARTITIONS:- Providing & Fixing Privy divider panel laminates(Urinal Partitions) coupled with rust resistant stainless steel

fitting .Composed with 12mm thick compact laminates with permanently incorporate anti- bacterial agents during

manufacturing .Compact board should be resistance to water immersion through permissible increase on thickness

and mass <0.60% and board density >1.35kg/cm3 and fulfilled the criteria of green guard gold certification and

manufactured under EN438-2&3:2005 standard. Urinal partition panel should consist of one undivided piece, chamfered

MR 27 edges with no joint in between which provides a cleaner and well structured to restroom space. Dimension of Urinal partition EACH 4 3,870.00 15,480.00

should be in 1000-1200mm in height and 450-550mm in depth and installed from the ground floor upto gap in between 500-

600mm . Finish and colour of Urinal partition should be approved under guidance of engineer-in-charge.

Providing and fixing battery based infrared sensor operated urinal of approx. size 590 x 400 x 400 mm having pre & post

MR 28 flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable EACH 4 16,500.00 66,000.00

brackets all as per manufacturers specification and direction of Engineer-in-charge

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and

1.10 earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch etc.) with 1.5 sq.mm

1.55 FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 0

A.2 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed

A.3 1.12 medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop Metre 130 334.00 43,420.00

earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but

1.24 excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 64 122.00 7,808.00

1.24.5 6 pin 15/16 amp socket outlet Each 36 197.00 7,092.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on existing modular metal boxes

1.27 etc. as required. 0

7 Digitally signed by AMIT

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single

1.14 core cable in surface/ recessed medium class PVC conduit as required

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 300 334.00 1,00,200.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8,780.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 10 1,005.00 10,050.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 10 1,365.00 13,650.00

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated

9.1 and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade

C.2 conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 3.5 C x 120 Sqmm XLPE cable RM 10 1093.00 10,930.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 10 383.00 3,830.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor armoured cable of 1.1 KV

C.3 MR grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked. 0

(a) 4 C x 16 Sqmm XLPE copper cable RM 20 1400.00 28,000.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 20 1700 34,000.00

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 4 13.00 52.00

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of

2.10 following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing

2.13 and commissioning etc. as required. 0

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on

2.4 surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

D.4 including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 1 9081 9,081.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker

2.14 (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

8 Digitally signed by AMIT

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but

1.24 excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 1 148.00 88.80

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI

MR couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of

engineer in charge

E.9 (a) 300mmx38mm(GI) - 3 compartment Mtr 8 3000.00 24,000.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways

MR supplied completely with base and cover plates, height adjustable junction box 65- 90 mm including all accessories

complete in all respect as per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned

E.11 1.19 copper braid and protected with PVC sheath in the exisitng surface/recessed steel/ PVC conduit as required Meter 36 47.00 1,692.00

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in surface/ recess including cutting

1.21 the wall and making good the same incase of recessed conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S. cable trays of perforation of not

4.1 more than 17.5% in convinient sections, joined with connectors suspended from the cieleing with MS suspenders including

E.13 bolts and nuts painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 24 1,137.00 27,288.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure

F.1 5.6 with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as SET 2 13,838.00 27,676.00

F.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. MTR 25 1,162.00 29,050.00

F.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. MTR 20 244.00 4,880.00

Total of Electrical items 6,83,602.40 2,18,862.00

SCHEDULE OF QUANTITIES - HVAC WORKS

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

S No DSR HVAC 2019 DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON-DSR (INR)

Supply, installation, testing and commissioning of following minimum 1.5tr capacity split high wall minimum 5star rating with

1.00 1.0 outdoor unit as per approved by site incharge Each 1 55000.00 55,000.00

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints i.e. Refnet Joints/ Header with 4500

4.00 4 Insulation for refrigearnt piping Each 10 45,000.00

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air

cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s),

minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s),

with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated

capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work per HP 28 16,415.00 4,59,620.00

on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as

required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

9 Digitally signed by AMIT

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor

ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in

2 case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree

C DB and 19 Degree C WB temperature.

5.00 5 Refrigerant Piping 0

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type

hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc. as required :

5.30 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 25 466.00 11,650.00

5.40 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 30 588.00 17,640.00

5.50 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 707.00 35,350.00

5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 30 865.00 25,950.00

5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1,022.00 20,440.00

5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1,108.00 22,160.00

Cable/Wiring 0

6.00 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as required. 0

Cable Trays with Covers 0

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less

than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the 0

ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

7.10 4.6.8 300mm widthx62.5mm depthx2.0mm thickness meter 6 1,190.00 7,140.00

7.20 4.6.10 450mm widthx62.5mm depthx2.0mm thickness meter 4 1,474.00 5,896.00

Drain Piping 0

Supply,installation,testing and commissioning of PVC drain water with necessary clamps, fittings such as bends tees etc. and

8.00 MR duly insulated. 0

40 mm dia (9 mm tick ins.) Rm 60 374.00 22,440.00

Total HVAC WORKS 9,37,632.00 1,22,440.00

WI-FI & LAN WORKS

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S No Description

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.High

1.00 MR Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 Mtr 2500 54.00 1,35,000.00

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable termination at Work Station end. Keystone

2.00 MR Unshielded Outlet, 180DG C6 Nos. 70 235.00 16,450.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7 feet) for information outlet (I/O) to end user

3.00 MR device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 70 240.00 16,800.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3 feet) for information outlet (I/O) to Rack End

4.00 MR Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 70 220.00 15,400.00

10 Digitally signed by AMIT

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for CAT6A cable termination at rack end. Data

B. MR Voice 0

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.High

1.00 MR Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 Mtr 500 54.00 27,000.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work Station end. Keystone Unshielded

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for CAT6 cable termination at rack end.

3.00 MR Voice Active Nos. 1 7,000.00 8,400.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for information outlet (I/O) to end user

4.00 MR device connectivity. (Rack end), High Speed Gigabit 26AWG Patch Cord, LSZH, C6 Nos. 24 220.00 5,280.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O) to end user

5.00 MR device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 24 240.00 5,760.00

Supply , Installtion , Testing and Comissioning of 2 Port British Style Shuttered Face Plate white for I/O fixing at user side

7.00 MR Supply , Installtion , Testing and Comissioning of 50 pair riser cable Mtr 8 600.00 4,800.00

C MR Network Rack and Other Accessories 0

SITC of 24U 600x600 Server Rack with perforation, Glass Door, Cable managemenet, 6/16A power strips- 2 nos, Castors, 4 fan

1.00 MR for cooling, Rack should have shelves - 4 nos Nos. 1 26,500.00 26,500.00

D MR Active 0

1.00 MR Supply & Installation Testing & Commissioning 24 PORT managed Nos. 2 32000 64,000.00

2.00 MR Supply & Installation Testing & Commissioning of Wifi as per direction of engineer-in charge Nos. 2 25000 50,000.00

CCTV SYSTEM DSR (INR) NON-DSR (INR)

S No Description UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S No Description UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of 2.5MP IR IP H.265 Vandal Proof Dome camera with 2.8 to 12mm Motorized

Lens,Smart IR, up to 30M IR distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital Noise Reduction),H.265+,

H.265, H.264, MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux

with IR,Video Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Intrusion, Crossing line, Motion detection, Object

1.00 MR left, Missing object,Intelligent Identification Face detection, Defocus, Scene Change,PoE (IEEE802.3 af) Power consumption: Nos. 6 3700.00 23,680.00

Max 7.2W,Edge Storage Micro SD Card, Up to 256GB, ANR Support,Working Environment -40°C ~ +60°C, Humidity ≤ 90%

RH(Non-condensing),Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 16Ch Embedded Network Video Recorder with 4 Sata Supports 1 × RJ45 25000

2.00 MR 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Analytics and ONVIF Nos. 1 25,000.00

4.00 MR SITC of SSD Hard Disk Drive 4TB, 24/7 surveillance category Only complete etc as required.etc.all complete Nos. 1 8000 8,000.00

5.00 MR 20 Pair MDF Box -

6.00 MR 20 Pair MDF Box with mounting Frame Nos 1 5500 5,500.00

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commisioning of 600X600 36-40Watt LED fitting complete with all accessories, housing made 2650

of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70)

>50000 Hours with High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and

operating at >0.95 PF., BIS approved Driver including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single

core cable and earthing etc as required.

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-Performance Efficiency) with LED (Light 1100

Emitting Diode), system power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of

4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-

treatment trim, prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

11 Digitally signed by AMIT

Furniture Work TOTAL AMOUNT TOTAL AMOUNT

Furniture Work TOTAL AMOUNT TOTAL AMOUNT

UNIT Qty RATE

Sno. Item Specifications DSR (INR) NON-DSR (INR)

MAIN TABLE SIZE:-2100(W)X900(D)X750(HT)

SIDE STORAGE SIZE:-900(W)X450(D)X675(HT)

SPECIFICATION:-

MAIN TABLE:- The main table shall be made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. Soft

closing access flap with in-built power box to be provided on work surface for wire management. Return table Work Surface

should be made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. PLB will be E1-P2 grade and

approved shade. Confirming to IS-12823:1990. 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers.

The edge band material should have Shore D hardness of 79± 4. The Hot melt glue used for fixing the PVC edge band should

have ISO 9001- 2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. The edges

should be PVC Edge banded with matching finish or have an option of reverse water fall edges.Modesty Panel shall be

made of 18mm thick PLT both sides pre-laminate board confirming to IS-14587:1998.The height of modesty shall be 450

mm.The modesty panel will be connected to the main table by 2 nos special Aluminum extruded brackets. The modesty will

be fixed 150 mm from the edge of the table.

Wire Management:Continuous PVC Cable Tray with provision to mount switches and sockets as per client requirement.

Vertical wire entry cover for wire uptake from floor to cable tray and 300mm Aluminium Flip Up for swicth access.

Legs and Supports:- The MS supports are made of 50 x50mm square ERW tubes- 16g with levelers to cater for floor undulations-

+/- 20 mm. ERW Tube confirming to IS 4923 : 1997 – 16g. Main leg members will be connected through a horizontal member

size 1.6mm thk, 50x25 cold formed ERW tube confirming to IS 4923: 1997. The vertical and the horizontal tubes will be welded

with CO2 MIG welding process confirming to IS 816 and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture

on a Robotic welding machine to ensure adequate welding strength with consistency.• The legs will be connected with

Cross beams to take care of the bending stress catering up to 1800 mm length and up to 900 mm depth of the work surface.

Finish:- All metal components & aluminum die cast parts will be powder coated by Nano ceramic surface treatment process

compiled to a Bend test-ASTM D3451 – 06, Adhesion -DIN EN 14901 Salt spray test- DIN EN ISO 9227, which is non-hazardous,

environmental friendly and will have uniform powder coating thickness of 50-60-micron thickness.

COMPOSITE SIDE STORAGE :-

The structure is made out of 18mm Thick Pre-Laminated Particle Board. The Shelves are adjustable in height. The shutters are

fitted with auto closing hinges. Finger Grooves Handles, central locking system , levellers & other necessary hardware are

DGM High Back Chair Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-(W)590mm X (D)505mm X

(H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR

plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with

padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall

+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-2kg /m3) Dimensions The

backrest has a foam of 28kg/m3.

DGM Visitor Back Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X (H)990mm.A

Chair contemporary design with an all black finish, . Material & subtype:Premium Leatherette, Colour & Colour Family:Black,

Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum

3 Seating Height:19".The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane EACH 6.00 17,640.00 1,05,840.00

foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

2 seater sofa Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned backrest

and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for

framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam

of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater Dimension(L)1390mm X (D)750mm X (H)710mm

12 Digitally signed by AMIT

Single seater sofa Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned backrest

and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for

framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam

of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater Dimension(L)800mm X (D)750mm X (H)710mm

6 TABLE CENTRE TABLE WITH GLASS TOP EACH 1.00 16,500.00 16,500.00

7 TABLE SIDE TABLE WITH WOODEN STRUCTURE EACH 2.00 11,250.00 22,500.00

Cubical 1&2 Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of 25mm thick pre - 32,650

laminated particle board of approved shade. The working and non working edges shall be finished with machine pressed

with 2mm PVC egdge banding. The table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm

with connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side

storage having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it. The

Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm

thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as

per site requirement. Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1800mm X

Cubical 1&2 High Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x 1315mm(H). The

Back Chair seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm

thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall

be provided with self tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/-

9 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs EACH 2.00 20,185.00 40,370.00

extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Visitor chair Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X

(D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick

BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be provided with

10 pneumatic height adjustment which shall have stroke of 10.0 +/- EACH 4.00 16,500.00 66,000.00

0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam

13 Digitally signed by AMIT

Meeting Table Conference Table

SIZE:-2700(W)X1200(D)X750(HT)

SPECIFICATION:-

Table top - The work surface will be in PLB 25mm thick one side pre-laminate board confirming to IS-14587:1998. The density of

PLB will be 680kg/m³. Surface: CPL( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be

confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.PVC edge

band will be minimum 2 mm thick, will be imported, quality confirming to DIN 68861, 53388 standards. The edge band will be

fixed to the work surface edges all round with Imported Hot melt Glue confirming to ISO 9001- 2008 and certified by ANSI for

Under Structure - • The MS supports are made of 50 x50mm square ERW tubes- 16g with levelers to cater for floor undulations-

+/- 20 mm. ERW Tube confirming to IS 4923 : 1997 – 16g. Main leg members will be connected through a horizontal member

size 1.6mm thk, 50x25 cold formed ERW tube confirming to IS 4923: 1997. The vertical and the horizontal tubes will be welded

with CO2 MIG welding process confirming to IS 816 and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture

12 on a Robotic welding machine to ensure adequate welding strength with consistency.• The legs will be connected with EACH 1.00 85,500.00 85,500.00

Cross beams to take care of the bending stress catering.• The number of cross beams will be based on the depth of the

table. The Cross Beams are made of 40x20 mm ERW tubes- 16 g.

• The Engineering plastic components will be made with Acrylonitrile butadiene styrene (ABS) which are confirming to ASTM

D256 for Izod Impact (1/4”) for Leg shoe and levelers.

Wire Management - 1 NOS of 450 mm Flipup for Power and Data and Vetebra for Wire Entry.Cable Trays will be provided

when the cable access is required from the top through ‘Flip ups”. The Switch/socket slots are provided as a part of the “Flip

Up” design just below the flip covers.

The “flip up” should be made in aluminum flip covers with soft closing arrangement. The “Flip up” cover will be anodized in

Silver grey finish to 20 microns confirming to IS 1868:1996, EN—2373-1 and IS 2360

Medium Back chair Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X

(D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick

BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be provided with

13 pneumatic height adjustment which shall have stroke of 10.0 +/- EACH 29.00 14,850.00 4,30,650.00

0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam

Modular Workstation Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side Top with 3 drawer

Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm, Double Raceway systems Skirting label

and below the table top . lower tile both side laminated and upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF board., and

14 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made in 18mm thick..Complete Made in MDF Board.. EACH 4.00 29,385.00 1,17,540.00

Laminate 1- Frosty White, Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel

Gray. and White Tinted Glass

lenior Workstation Dimesnion: 1200mm(L)x 600mm(D) x 750mm(H) Modular Workstation With 1200mm, Double Raceway systems Skirting label

and below the table top . lower tile both side laminated and upper tile inside side fabric, White

15 Board and white Tinted Glass . Laminate 1- Frosty White, Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin EACH 24.00 23,850.00 5,72,400.00

Blue, Powder Coating-Munshel Gray. and White Tinted Glass with mobile pedestal

Reception Table Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of 25mm thick pre -

laminated particle board of approved shade. The working and non working edges shall be finished with machine pressed

with 2mm PVC egdge banding. The table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm

with connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side

storage having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it. The

Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm

thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as

per site requirement. Main Table Dimension (L)1350mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1200mm X

Total furniture Ground floor 19,20,016.00

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price DSR Amount Non-DSR Amount

14 Digitally signed by AMIT

1.00 RECEPTION AND OUTER AREA 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of required size and shape with arrangement of screws

in the letters itself for mounting on the walls or pasting using 3M VHP Tape. Fixing complete as per directions of the engineer.

The Sizes would be calculated in Sqft as per Logo Design provided.

Tentative Size 36"X60" Each 1 43,200.00 43,200.00

TOTAL 43,200.00

15 Digitally signed by AMIT