REPAIRS TO JOINERY CUPBOARD WOODEN ALUMINIUM PARTITIONS SUNFILM BIRDPROFFING ETC OTHER THAN HOSPITAL BLDG AND REPAIRS TO HARDSTANDING FOOTPATH COMPOUND WALL AND FENCING ETC AT INHS ASVINI UNDER AGE I ASVINI COLABA MUMBAI

Amount

Taking down shutters incl frames (without taking off shutters from the frames) are not exc. 1.50sqm each complete all as specified and directed

Taking down shutters incl frames (without taking off shutters from the frames) are exc. 1.50 sq. m each but n exc 4 Sqm Each complete all as specified and directed

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed

S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F in repairs Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

S&F mild steel holdfast & similar small articles confirming to Fe 290 gde-E-165 complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in bed blocks for holding hold fasts including necessary form work complete all as specified and directed

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); complete all as specified and directed Note:- (i) Glazing and aluminium wire mesh shall be measured and paid separately

S&F Plain, framed, panelled shutters 30mm thick any number of panels) with panesl of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chawkats complete all as specified and directed

S&F in repairs powder coated aluminium sections of various sizes required of sliding or fixed type for frame and shutters of doors, windows, ventilators and partition with one or more rebates etc.including necessary joining cleats, glazing clips, beading,rubber packing, screws and all other fittings like locking arrangement for shutters, handles, tower bolts hinges complete all as specified and directed. Note :- (i) Glazing and aluminium wire mesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.

M&L for 4.80 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads, in square in exe 0.50 Sqm in each pane complete all as specified and directed

All as per Srl item No 13 here in before but 5.50mm thick

All as per Srl item No 13 here in before but 3.00mm thick

S&F aluminium, anodised, barrel tower bolts 100 mm long of extruded section.

All as per Srl item No 16 here in before but 150mm long

All as per Srl item No 16 here in before but 200mm long

All as per Srl item No 16 here in before but 300mm long and fixed in repairs

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

All as per Srl item No 20 here in before but fixing in repairs

S&F Butt hinges 75mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed

All as per Srl item No 16 here in before but 100mm long

S&F Parliament hinges 100mm width of recess between flanges (when open), mild steel cold rolled complete all as specified and directed

S&F in repairs Parliament hinges 100mm width of recess between flanges (when open), mild steel cold rolled complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised 100 mm size, ISI marked complete all as specified and directed.

All as per Srl item No 26 here in before but 150mm long

S&F in repairs 12mm thick, Medium density fibre board (MDF) exterior grade, fixed to timber frame work complete all as specified and directed

All as per Srl item No 28 here in before but including necessary hinges, hasp and staples, one handle to per leaf etc. complete all as specified and directed

S&F 2nd class H/W beads straight (any size) for glazes/ guazed joinery renewed including mitres complete all as specified and directed

S&F in repairs 2nd class H/W in scantlings in timber framed work and fixed, wrought, as in partition wall complete all as specified and directed

S&F in repairs 12mm plywood, 1mm to 1.50mm thick thick sunmica decorated (as approved), grade 1 (with BWR resin) with decorated on both faces; fixed with approved adhesive and including necessary screws, nails etc to timber frame work complete all as specified and directed

S&F in repairs 12mm plywood, 1mm to 1.50mm thick thick sunmica decorated (as approved), grade 1 (with BWR resin) with decorated on one faces only, interlocking wooden panelling, fixed with screws to the timber framework, nails matching with the shades of sunmica complete all as specified and directed.

M&L in repairs for 12 mm thick interlocking laminated wooden flooring on and including 2 mm thick foam sheets/adhesive as per manufacturer instruction of branded manufactures including proper levelling of base shall be done before laying including filling holes with white cement plaster in CM (1:3) to made for true level complete all as specified and directed.

S & F in repairs 12mm thick toughened glass door, make of modiguard, double shutter, including SS pivot of floor door closer, hydraulically regulated door closer, SS corner support, SS handle 600mm long fixed at both sides of both shutter including choice glass printing and necessary SS accessories, like clampls etc. complete all as specified and directed

S&F in repairs 20mm dia aluminium powder coated curtain rails including brackets, stops, rollers (as approved) etc cmplete all as specified and directed

S & F in repairs powder coated aluminium tube or box section, aluminium 'u' or 'F' and flat section, beading patti for fixing the mesh to existing windows or other opening complete all as specified and directed

S & F for high density polymer extruded mesh coloured 2.40mm thick mesh and 27mm average aperture for fly, bird protection etc. complete all as specified and directed

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs hydraulic door closer regulated designation no 3 universel type almn cast body suitable for door shutters of 851 to 1000mm in width and of wt between 61 to 80 kg cast iron body complete all as specified and directed

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, arpons complete all as specified and directed

M&L Machine cut Kota stone slab 20-25mm thick in riser steps, skirting, dado, jambs, pillars, window cills etc. laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM(1:4) complete all as specified and directed

M&L 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:4) complete all as specified and directed

S&F in repairs plain aluminium sheeting 1.5 mm thick alloy 31000 H4 in shutters including fixing arragement such as heavy duty aluminium hinges, hasp and staples complete all as specified and directed

S&F in repairs 12mm thck prelaminated particle board, interior grade prelaminated both side with white lamination, fixed with screws to aluminium frame work including necessary screws, beading, glazing clips etc complete all as specified and directed

S & F sheet glasses, opaque / frosted on one side 4.80mm thick glazing all with aluminum beading, glazing pin etc, or with oil putty in suare n exc .5 sqm in each pane complete all as specified and directed

M & L for french polishing on surfaces of any descripton width or girth including cleaning and preparing the surfaces including a coat of wood filler with two coats complete all as specified and directed

S&F in repairs Aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40mm complete fixed with aluminium wire staples and beads complete all as specified and directed

S&F in repair aluminium anodised DECO grill 10mm thk, DG-104 fixed with necessery U/F/H channel, including cutting for handles tower bolts etc and providing U clip conceal the rough edges complete all as specified and directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and removing demolished material out of MD land complete all as specified and directed

Material & labour for 75mm thick cement concrete 1:3:6 type C2 (40mm graded stone aggregate) as in subbase complete all as specified and directed

M&L 50mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed

S&F chequered cement concrete tiles of size 30cm x 30cm x 25mm, set jointed and pointed with neat cement slurry incl 20mm thick screed bed or bedding in CM 1:6 complete all as specified and directed

M&L Machine Pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade over and including 50 mm thick fine sand cushioning complete all as specified and as directed.

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges type C1 (1:3:6) using 20 mm graded aggregate complete all as specified and directed

Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site complete all as specified and directed

Demolition of Brickwork or stone /boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

M & L for PCC 1:3:6 type C-I using 20mm graded stone aggregate as in coping etc. and similar work including necessary formwork weathring slightly rounded or chamfered complete all as specified and directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed

Material & labour for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed

M & L preparation of new undecorated surfaces of walls, soffits & facias of beam, chajjas etc and applying two coat of weather proof Acrylic based paint (100% acrylic) exterior grade over a coat of primer complete incl all necessary arragements like scafolding, ladder upto 25 mtr height etc and all as per manufacturers instructions complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

S& F mild steel works in post and struts in fencing including cutting to shapes as directed, drilling holes including all necessary welding, fixing in masonry complete all as specified and directed and conforming to Fe-410-0 or Fe-310-0

S& F in repairs concertina coil fencing 600mm dia of short profile having corewire dia 2mm and pitch between barb 24mm and tape 0.5mm thick including cutting, fixing, welding, rebating complete all as specified and directed

S&F in repairs chain link MS galvanised fencing, including line wires, any mesh, size and type to any type of standards, rails, sraining bolts etc. and also including provision of binding wire complete all as specified and directed

Mild steel round bars, 10mm dia as in tie rod, cut to length, bent to shape required, including cranking, bending spirally for hooping for fixing chain link MS galvanised fencing to steel post, hooking ends conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F in repairs 50mm to 75mm nominal bore, mild steel tubes as railing, fixing by welding or fabrication complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed

DHARICHHAN ENTERPRISE

SN CONSTRUCTION

SHREE JAGDISH FURNITURE CO.

Darpan Construction

AGRAWAL ASSOCIATES

7hills Construction company