SPECIAL REPAIRS TO TOILET BLOCKS T-28 AND T-09 AT INS BAAZ UNDER GE (I) CAMPBELL BAY

Amount

Dismantling of old plain or corrugated steel sheeting of, any gauge, thickness as in roof coverings and segregation serviceable sheet, keep them safe custody for reuse and removing unserviceable materials from site of work complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets and removing materials from site of work complete all as directed.

Demolition of old cement concrete in ground floor and pavings not exceeding 15cm thick (un reinforced) and removing debris from site of work complete all as directed.

Taking down chowkats or frame shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing to store yard complete all as specified and as directed.

S & F Rolled sections as in main and cross beams,hip and jack rajters,purlin where connected to common rafters and running rails and guides for sliding doors,fixed with angle cleats or other connecting plates conforming Fe-410W (Gde-E-250) quality -A complete all as specified and as directed

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

M&L for rendering 10mm thick with CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L non-skid ceramic tiles coloured of 7 to 8 mm thick(Square / Rectangular ) conforming to IS- 13712, grade B-II-(a) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed layer 15mm thick in cement mortar 1:6 finished even and rough complete all as specified

M & L for glazed ceramic coloured tiles 350 x 250 x 7 / 450 x 350x7mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection and paving finishing concrete surface even and smooth without using extra cement including necessary construction joint 6 mm wide grooves to full depth at 2 to 3 m interval and at every change of direction and filling the grooves with mixture of bitumenand sand mixed in the ratio of 1:3 by weight complete all as specified.

M & L 4mm thick desiner non asbestos fibre Cement building boards fixed or laid / inserted to GI /Aluminium frame work in ceilings including Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling,suspended with hangers complete all as specified and as directed.

M&L preparation of new or previously untreated steel surfaces of any description, not exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces on wall and applying two coats of oil emulsion,distemper white or tinted over alkali resistant primer complete all as specified and as directed.

M & L applying two coats of cement based paint over a priming coat on old decorated wall surface including preparation of surfaces and curing complete after removal of existing treatment complete all as specified and as directed.

M&L for anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S&F anodised powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and suitable anodised aluminium handles and rollers complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges anodised aluminium snap beading, screws etc (thickness of powder coating not less than 50 micron) complete all as specified and as directed. Make : INDAL/HINDALCO/JINDAL or equivalent as per IS

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge.

M&L 12 mm thick prelaminated particle board,exterior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed to aluminium doors /partitions all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F solid core PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification complete all as specified.

S&F 30mm thick (style) factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S & F 100mm size aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-21 complete all as specified and directed

S&F 150mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.

S&F 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs vitreous China wash down water closet pan EWC (Pedestal pattern) white 'P' trap including 10 lit capacity pvc valveless,syphonic action type flushing systern,cover for water closet black, closed pattern with bottom with mild steel chromium plated or aluminised hinge device including flush pipe complete all as specified and as directed.

S & F in repair vitreous china urinal bowl type flat back size (465x355x265)mm conforming to Is-2556 (Part-6) 1995 white grating and union for discharge pipe including providing and fixing plugs bedding urinal against wall in CM(1:2) including 60mm brass screws ,etc including 90 cm long 32mm bore waste pipe complete all as specified and as directed.

S&F in repairs, wash hand basin of size 550x400 vitreous China (flat back or angle back type) including half pedestal and cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste coupling, waste pipe etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F 15mm dia. chromium plated pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

Supply and Laying of 32mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 Fittings on wall/ceiling or laying in floors incl taking down of existing plumbing lines etc. complete all as specified and as directed by the Engineer-in-Charge.

Supply and Laying of 25mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 Fittings on wall/ceiling or laying in floors incl taking down of existing plumbing lines etc. complete all as specified and as directed by the Engineer-in-Charge.

Supply and Laying of 20mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 Fittings on wall/ceiling or laying in floors incl taking down of existing plumbing lines etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stop valves, 20mm dia chromium plated ,fancy tpye,cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified

S&F 15mm dia. chromium plated angle stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F Bib taps 15mm dia. fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) multi floor trap 75mm dia.plain with grating including jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 110mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) plain bends any radius with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) plain bends any radius with access door complete all as specified and directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowls 110mm dia. complete all as specified and as directed by the Engineer-in-Charge.

S& F Health faucet 15mm dia. with one meter long easy flex tube in chromium finish and wall look of make ABS complete all as specified and as directed by the Engineer-in-Charge.

S&F 125mm dia. chromium plated brass shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge.

S&F Semi circular 150 mm dia PVC ( SWR ) pipes for rain water gutters including necessary fixing arrangements with and including MS clamps for support etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F Tubular towel rail 20mm dia 'D' type,Aluminium anodised 60 cm long between flanges complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors / walls laid bedded and jointed in any mortar and removing materials from site of work complete all as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base for flooring complete all as specified and as directed by the Engineer- in-Charge.

M&L for chequered designer cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with white or grey cement and pigments over 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls floors, etc complete all as specified and as directed.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FR) cable of working voltage 1100 volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25mm size PVC rigid non metallic casing capping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick Bakelite sheet (Make : Hylam or equivalent) fixed with brass screws & cup washers, including 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FR) cable as earth continuity conductor connected to main switch/DB's or common earth dolly for one light point controlled by one 5/6 amps one way switch complete all as specified. (Make of cable : PLAZA/ HAVELLS/ FINOLEX/ POLYCAB, Make of PVC casing caping : PRESTOPLAST/ PLAZA/ MODI/ GARWARA)

(a) One light point controlled by one, one way switch 5 Amps

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per item No.56 above but 2.5 Sqmm cable for 3 pin 15Amps socket point cotrolled by one switch on independent board and 2.5 Sqmm copper coductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

S&F Switch piano flush button, white/ivory finish, 5/6 amps, single pole, one way complete all as specified.

S&F Switch socket combination, 2 in 1, 3 Pin, 5/6 amps, multipurpose, flush type white/ ivory finish complete all as specified.

S&F Switch socket combination, 2 in 1,3 Pin, 5/15 amps, multipurpose, flush type universal complete all as specified.

S&F ceiling rose, surface bakelite, large type, 220/240 volts, three terminals, white/ivory finish complete all as specified.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing conduit wiring etc and making good, cutting not exceeding 10cm girth as in stone or concrete block walls complete all as specified

S & F DB with sheet metal enclouser 240 volts, 8 way with 100 Amps rated bus bar Single pole & neutral single door incl fixing on suitable rectanguler block complete all as specified. Make: Havells, L&T, Legrand or equivalent.

S&F MCB sp & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified. (Make : Legrand Cat No 603231 to 603237 or equivalent approved model of SIEMENS/ MERLIN GERIN/ INDO ASIAN).

S & F MCB DP 240 Volts,32 Amps ‘C’ series, 50 Hz, breaking capacity 10 KA complete all as specified and as directed. (Cat Part No 6032 72 of make LEGRAND or equivalent model of L&T/Legrand/ABB)

M&L for Exhuast fan industrial/decorative type AC single phase 230/240 volt of size 300mm sweep complete connecting up incl provision of cable from ceiling rose/connector to exhuast fan incl required hold fast 10 cm long incl washers with loures complete all as specified and directed. (Make : Havells/CG/Bajaj)

S&F Surface mounting 10 Watt LED Luminaries with epoxy white powder coated CRCA sheet steel housing with reeded translucent acrylic diffuser and 1 x 10 Watt LED fitting including taking down old unserviceable fittings any type complete all as specified and as directed. Make: CG, Bajaj, Wipro, Philips

S&F surface mounting 20 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95 . The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make: Phillips / Havells / WIPRO/Bajaj

Supply and fix Bldg security light 25 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95 . The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make: Phillips / Havells/ WIPRO

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2x4.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire complete as directed by Engr in Charge. Make of wire: Havells, Plaza, Gloster, Finallex. Make of Conduit : Prestoplast, Modi its acceserories, Pressfit or equivalent

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire completeas directed by Engr in Charge. Make of wire: Havells, Plaza, Gloster, Finallex. Make of Conduit : Prestoplast, Modi its acceserories, Pressfit or equivalent

Note : An amount of Rs 47,770/- towards Schedule of Credit shall be deducted to arrive the Contract sum.

DEEPAK AGENCIES

SKV Engineering

P Babu

Govinda Swamy Construction

CHANDER SEKER ENTERPRISE

M/s S U Enterprises

B.R. ENTERPRISES