SCC/NK/NIC/OT(P)/RENO RNC/214/RA-3364

Detail foundation and structural drawing and design of the structural stair and walkway. a. GA drawing b. All short of Civil drawing and detailing c. Structural Drawing and detailing d. Analysis of existing shop to support walkway for access the roof of structural shop and provide all structural drawing and detailing for retrofitting of existing steel structure. e. As Built drawing of old existing shop. f. Vetting of final design & drawing by Reputed college/State or central University like IIEST/JU/IIT or Govt. Authorized Agency (All drawing should be submitted both in hard and soft copies along with PDF & Auto Cad files)

Taking out carefully asbestos Sheeting, North light glazing, translucent sheet, glass panel etc.:- Taking out carefully asbestos Sheeting, North light glazing, translucent sheet, glass panel, CGI, CI sheet of roof, side valleys, ridge, louvers, side sheeting/cladding, gutters, Rain water downtakes pipe, wall etc of structural steel sheds of all sizes with all lead and lift after unscrewing bolts, nuts, screws, removal of wind tie etc with all necessary safety measures complete as per drawing or as instructed by the engineer and disposal of the dismantled materials (asbestos sheets, translucent sheets and nothlight glazing, grass pannel ) out side GRSE area (to be arranged by the Contractor in conformity with statutory rules) and stacking of CGI, vally etc at GRSE . Payment will be made for net area of the sheeting. Lapping of any nature shall not be considered for payment. Dismantled asbestos sheets, translucent sheets and nothlight glazing will be property of contractor and the contractor while quoting his rate should take salvage value of these into account.

Clearing of Grass and Removal of Rubish,Trimming of tree:-Clearing of grass, uprooting rank vegetation, bushes, shrubs, sapling and tress girth upto 300 mm removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, including removal of rubbish. Trimming of tree including cutting of trunks, branches upto a height of 20m and removal of stumps and rubbish as per direction of site-incharge within a lead of 1000 m

Stripping off worn out plaster and raking out joints of walls, celings etc.:- Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish.

Dismantling all types of masonry struucture:- Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m

Dismantling all types of struucture R.C. floor, PCC, roof, beams etc. struucture:- Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars

Dismantling of MS structure in parts R.S. joists, channels, angles, tees, plates , Valley gutter etc.:- Labour for dismantling and cutting, lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates , Valley gutter etc.at any level complete as directed.

M.S Structural works:- M.S. structural works in roof truss, columns, beams, stair, walkway, handrail, ladder, valley gutter,Runner for Ridge,Runner for polycarbonet sheet etc. with simple rolled structural members (e.g. joists, channels, angle, tees, flats, plates, tube, pipe etc. including hollow sections of square or rectangular shape) connected to one another with brackets, gussets, cleats as per design/drawing or direction complete, including supplying, fabrication, hoisting and bolted or welded with proper as procedure cleaning of structural surface/grit blasting/buffering including necessary gas cutting, drilling, providing and fixing of bolts, nuts, washers etc with 01 coat primer and 2 coat of aluminium paint. (Payment shall be made on the basis of calculated theoretical weight of structural members only in finished works. No additional payment for weld metal deposition, bolts, nuts and washers etc. shall be allowed) ( 40% payment will be released on receive of the Structural steel materials inside the GRSE premises along with subsequent clearence from engaging dept.).

M.S Structural works for Strengthning of corroded structural steel members:- Strengthning of corroded structural steel members in roof, column, truss, ties, brackets, girders, base plates, hand rail etc. by replacing corroded steel members with new members or by fitting fixing with new additional steel sections (e.g. splice plate etc.) including fitting, fixing, field weld, edge preparation and other preparatory work complete, as per the drawing / instruction of EIC. (Payment will be made based on weight of the new structural steel member to be fixed. No separate payment will be made against cutting, drilling, welding, weld metal deposition, bolts, nuts and washers etc.)