SPECIAL REPAIR TO TOILET BLOCK OF BLDG NO P 1/3 AND P 2/1 (OTM ACCN) AT AMRITSAR CANTT

Amount

Dismantaling floor hearth or wall tiling incl cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site complete all as specified.

Demolition of mud in roofs, any thickness including plastering and leaping etc complete all as specified and directed

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris,rubbish to a distance exc 400 m but not exc 500m complete all as specified.

Demolition of cement concrete (un-reinforced)in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 50 mtrs where directed complete all as specified and directed.

Dimantling water tanks cap exc 250 & n.exc.500ltrs complete all as specified and directed.

Taking down shutter of any desc. exc. 1sqm but not exc.2sqm each and refixing in the same opening after necessary easing ,adjustment etc complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.50sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and directed.

Taking down chowkhats or frames exc. 1.50sqm each but n.exc. 4 Sqm each with shutter (w/o taking of shutter from the frame ) complete all as specified and directed.

Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick ( Square/ rectagular ) exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M and L for coloured Glazed ceramic tiles450mmx300mmx7mm or 300X200mmX7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces of wall such as dado laid over 10mm thick cement screed in 1:4 complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm includingcleaning surfaces etc complete all as specified

Material and labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and flush pointing as work proceed in CM 1:3 mixed with 5% of crude oil by weight of cement complete all as specified.

All as per Srl item No 14 here-in-before but except tiles Note : Serviceable brick tiles obtained shall be reused complete all as specified and directed.

Material and labour PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete all as specified.

Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to either side complete all specified.

M&l for brick work with sub class B bricks straight or curved on plan exc 6m mean radius brick walls built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius as in half brick walls built in CM 1:4 complete all as specified and directed.

S&F Rotational moulded polythene water storage tank (multi layer) capacity 500 litre (cylindrical vertical with closed top) with 20mm dia PTMT ball valve with epoxy coated aluminium rod (minm weight 210gms) hoisted and fixed in position all as specified in SSR Part 1 & making connection complete all as specified and directed.

S & F 20 mm bore ball brass valve high pressure with polythene float and flynut complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Box type steel window made of ERW tube P-section of size 60mmX25mm double frame, comprises of glazed Skelton & gauzed shutter of ERW tube P-section size 50mmX20mm with one/two Nos openable leaf consisting of two nos sash bar of T-section 20mmX3mm welded to frame with one No vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixtures like Handle, Tower bolts, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD 1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1 complete all as specified and directed. (a)Hold fast,150mm long of 12mmX3mm MS flat-04Nos per window (b) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (c) MS Tower bolt 150mm long-02 Nos/leaf (d) Z Section stopper 20mmX25mm,100mm long -01 No per leaf (e) Cleat 55mm long of hollow square 15mmX12mm-02 Nos per leaf Note:- 1. Wire guage, Sheet glass, guard bar and painting shall be measured and paid separetely. 2. Mode of measurement for this item shall be for window portion only excluding ventilator portion where ever shown in drawing.

S&F MS box type window/ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ-70/06-07 dated 07.06.07 with guard bar including priming coat complete all as specified and directed

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0 complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

Material and labour PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in hold fast block,filling in pressed steel frame ,roof kerbs or mud stop, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

M&L for 2nd class hard wood 35mm glazed and skelton shutter open rebated and prepared to receive glass,gauge etc.(w/o sash bars)edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc.as spcd. Clause 8.20(a) complete all as specified and directed.

S&F 2nd class hard wood 35mm thick plain framed panelled factory made shutter two panels with lock rail and panels of 9mm BWP commercial piy or 12mm veneered complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification.

S&F Butt hinges extruded alumunium alloy with galvanised mild steel hinges pin anodisedand fixed ,type B-21 of 100mm complete all as specified and directed.

S&F Butt hinges mild steel medium weight cold rolled of 100mm complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section of 150mm complete all as specified and directed.

S&F Aluminium handles cast type anodised of 150mm complete all as specified and directed.

S&F mild steel barrel tower bolt ,stove enamelled black with bright bolt of 150mm complete all as specified and directed.

S&F mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl. Alminimum of bolts and nuts four on bolt plate and two on staple plate of 250mm long complete all as specified and directed.

S&F mild steel pressed handles oval type stove enamelled black of 150mm complete all as specified and directed.

S&F hasp and staple aluminium anodised incl.bolt to hinge plate and fixed with screws of 100mm size safety type complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-charge.

Supplying and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified.

Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone concrete or brick surroundsglazed with putty or fixed with beads exc.105sqm complete all as specified and directed.

M and L for sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as specified and directed.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or concrete Surfaces in cement mortar 1:6,even and smooth w/o using extra cement .

M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for Preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of dry distemper on walls including cornices pilasters etc complete all as specified.

All as per item No 47 above but two coats of cement based paint after preparation of new plastered surfaces complete all as specified and directed.

M&L for Preparing old decorated surfaces plastered/unplastered by brooming down etc and applying one coat of white wash on ceiling complete all as specified.

M&L for Complete removal of existing treatment of walls and applying two coats of dry distemper over a coat of chalk whiting complete all as specified and as directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls and over a coat of alkali resistant priming paint complete all as specified.

M&L for Preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer complete all as specified and directed.

M&L for Preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as specified and directed.

All as per item no 52 above but one coat synthetic paint on old wooden surfaces etccomplete all as specified and directed.

All as per item no 53 above but one coat synthetic paint on old steel surfaces etccomplete all as specified and directed.

M&L for 20-25 mm thick single piece machine cut kota stone slab as in steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for 15 mm thick machine cut kota stone slab on vertical surfaces as in skirting/riser of steps etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and also making edges rounded or bull nosed, over and including and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing 15mm dia and connection ,incl cleaning for refixing complete all as specified and directed.

S&F Tubes galvanised medium grade with all fittings fixed to walls or laid in floors 15mm dia complete all as specified and directed.

Refixing old steel tubing 15mm incl all fittings dixed to wall or laid in floor complete all as specified and directed.

Taking up or down steel water tubing 20mm dia and connection ,incl cleaning for refixing complete all as specified and directed.

S&F Tubes galvanised medium grade with all fittings fixed to walls or laid in floors 20mm dia complete all as specified and directed.

Refixing old steel tubing 20mm incl all fittings fixed to wall or laid in floor complete all as specified and directed.

S&F Vitreous china sqatting pan white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) inclusive P or S trap comp all as specified.

Supply and fixing in repair PVC valve less, symphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets 10litres complete all as specified and directed.

S&F Pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair vitreous china wash basin oval type white of size 550X400mm flat back including bracket,of including PTMT waste coupling (half or full threaded) bore dia of discharge pipe 32mm(minimum weight 45 gms) and pvc waste pipe with cup and washer siutable for waste coupling 32mm bore dia complete all as specified

S&F vitreous china urinal half stall type cera with CP spreader white with grading and union for discharge pipe, including providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 securing urinal to pings with and including 60mm long brass screws ,pointing around urinal back in cement fixing with bracket , flush pipe , grading and union for discharge pipe complete all as specified and directed

S&F in repairs bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15 mm bore ( Concealed type) fixed in repair.complete all as specified.

S&F Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mmcomplete all as specified and directed.

S&F Chromium plated shower rose with swivel joints 75mm size complete all as specified and directed.

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repair complete all as specified and directed.

S&F in repairs pillar taps 15 mm dia cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repairs PVC floor trap 75mm incl.CP grating complete all as specified and directed.

S&F 110mm PVC sanitary connection -for WC connector complete all as specified and directed.

Dimantling pipes of any desc.fixed to wall or laid under floor complete all as specified and directed.

S&F PVC(SWR) Pipes single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe complete all as specified and directed.

S&F PVC(SWR) Pipes single socketed in any length with rubber ring joint fixed with wall of 75mm complete all as specified and directed.

S&F PVC SWR branch piece single equal or unequal 110mm complete all as specified and directed.

S&F PVC SWR branch piece single equal or unequal75mm complete all as specified and directed.

S&F PVC(SWR) bends any radius 110mm complete all as specified and directed.

S&F PVC(SWR) bends any radius 75mm complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.

M and L for 20mm thick granite machine cut slab table rubbed and polished granite as on cooking platforms/ Wall partion incl. pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade laid over 20mm thick cement screed in cement mortar 1:6 complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in shelves,bases for water tanks ,roof landing etc complete all as specified (including demolition) complete all as specified and directed.

M&L for Mild steel TMT bar’s 6 to 8mm dia cut to length bent to shape required including cranking bending and binding with wire (annealed) not less than 0.9mm or scouring with clips quality conforming to Fe-410 or Fe 410.0 complete all as specified and directed.

M&L for Form work to soffits of suspended slab such as roof slab , floor slab, chajja not exc 200mm thick to rough finished surface of concrete complete all as specified and directed.

M&L for cement concrete 1:7:12 type F-2 nominal mix concrete (using 40mm brick coarse aggregate )as sunken floor complete all as specified

M&L 40 mm thick cement concrete type B-1 1:2:4(using 20mm graded cruhed ston aggregate )as in floor including finishing cement concrete surface even and smooth without using extra cement complete all s specified

material and labour for 15 mm thick plaster in CM (1:3)finished even and smooth with out using extra cement using WPC(wpc shall be as per manufactured with measured and paid separtely ) complete all as specified and directed.

Supply only water proffing compound complete all as specified and directed. Make:- pidilite , fosroce sikar , STP and equivalaent makes as approved by GE

Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit complete all as specified and directed.

M & L for point wiring for One light point/Bell/Fan point controlled by one switch complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

All as per Srl item No. 96 here in before but One 3 pin 5 amps switch socket on independent board complete all as specified and directed.

All as per Srl item No. 96 here in before but One 3 pin 5 amps switch socket on same board complete all as specified and directed.

All as per Srl item No. 96 here in before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 1.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 2&3 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads complete all as specified and directed.

Supply and fix switch piano one way 5 A, SP, 230 Volts complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type complete all as specified and directed.

Supply and fix Switch piano 2 in 1, 3 pin15 Amps Flush type complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x32mm complete all as specified

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant/batten fittings complete all as specified and directed

Supply and fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete of Make Jaguar, Havells , CG.or equivalant make as approved by GE

M & L for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 2.5 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

S&F exhaust fan 250 mm sweep metal body heavy duty including cutting of wall /window/lowers and fixing arrangement complete all as specified and directed.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 4 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 meters wide and not exceeding 1.5 meter depth for foundation for LT cables complete all as specified and as directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers each not exceeding 25 cm in soft/loose soil complete all as specified

Removing surplus spoil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meters above the starting point, complete all as specified.

M&L for Sand cushioning to UG cable 40cm wide 15cm and 10cm thick above and below the cable in trenches/ducts complete all as specified and directed by Engineer-in-Charge.

Supply and laying burnt brick sub class 'B' modular size, for cable protection laid length wise perpendicular to the axis of cable complete all as specified and directed.

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. Make :Legrand Lexic / Hager /Schneider Elect . (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)complete all as specified and directed.

S & F in repair MCB double pole, 240 volts, 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make polycab havells or equivlant make

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make polycab havells or equivlant make

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% (Make of MCCB : Legrand Lexic DPX /Schinder Elect Compact CVS/L&T DU 100) complete all as specified. Make : Legrand Lexic (Cat Part 607790) / Hager (Cat Part No HVD04MGN) / Schneider Merlin Gerin Multi-9 (Cat Part No MGNV10CDD12). (Note : The cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) complete all as specified and directed.

ESS KAY BUILDER

m/s. gopal krishan

m/s inder construction co

M/s Vijay Construction Co.

GEE EMM ASSOCIATES

M/s MAHAJAN CONSTRUCTION CO.

B.J.CONSTRUCTION CO

MAAN ENTERPRISES