Loading
Loading…
Loading…
Tender Value
₹75.2 L
EMD Value
₹1.5 L
Closing Date
15 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DYCE C CNB
13 conditions · 2 needing a document upload
Tenderer must have minimum average annual contractual turnover of V/N" or 'V' whichever is less; Where V= Advertised value of the tender in Crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of " total contractual payments" in the previous three financial years, as per the audited balance sheet. However in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar nature of work "P.way work"
21 conditions · 12 needing a document upload
Tenderer must upload attested copy of PAN card ofhis own (Proprietary Firm) / Partnership Firm /company / Joint Venture (JV) / Registered society/Registered Trust etc. whatever is applicable, on behalf of tender has been submitted.
Following documents must be submitted if WorkExperience Certificate submitted in TechnicalEligibility Criteria has been issued by Public listedcompany. Failure in submission of any of below-listed documents may lead to summarily rejectionof offer. (i) Copy of Work Order (ii) Bill of quantities(iii) Bill wise details of payment received dulycertified by Chartered Accountant (iv) TDScertificates for all payments received (v) Copy offinal/last bill paid by company (vi) Copy ofdocument regarding person authorized by the Publiclisted Company to issue such certificate, duly self-attested (vi) Copy of document showing annualturnover of the public listed company in last threefinancial years excluding current financial year, dulyself-attested (vii) Copy of the documents regardinglisting in the National Stock Exchange or BombayStock Exchange with details of status of listing ason date of opening of tender, duly self-attested (viii)Copy of document of incorporation / registration ofthe Public listed company (should be at least 5years prior to date of opening of tender), duly self-attested.
As per Clause No.17 of Tender Form (Second Sheet)Annex. I of Part-I of GCC-2022, the tenderer shallclearly specify whether the tender is submitted onhis own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) /Registered Society / Registered Trust etc. For this, tenderer shall submit information as per Annexure-with the attested copies of the constitution of their concern. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender (As per Clause No. 14(ii)(d) of Tender Form (Second Sheet) Annex.I of Part-I of GCC-2022).
(As per Clause No. 14 of Tender Form of Part-I ofGCC-2022) The tenderer whether sole proprietor, acompany or a partnership firm / LLP / registeredsociety / registered trust etc. if they want to actthrough agent or individual partner(s), should submit a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to sign the tender documents, submit the tender & create liability against firm / company / LLP / society /trust, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No Claim Certificate" and refer all or any disputes to arbitration. Tenderer must submit this power of attorney in Proforma depending upon type of firm. Offer will be summarily rejected in case of non-submission of such document.
Tenderer must submit list of Plants & Machinery available on hand (own) and proposed to be inducted and hired for the tendered work.
Tenderer must submit list of Personnel/Organization available on hand and proposed to be engaged for the tendered work in proforma
In case, tender has been submitted on behalf ofpartnership firm, tenderer must upload partnershipdeed complying with Clause 18.2 of Tender Form(Second Sheet) Annex. I of Part-I of GCC- 2022.Offer will be summarily rejected in case of non-submission of such document.
In case, tender has been submitted on behalf of LLP(Limited Liability Partnership) registered under LLPAct-2008, tenderer must submit following documents: (i) LLP Agreement (ii) Certificate of Incorporation (iii) Resolution passed by partners of LLP firm for submitting tender by LLP firm and to deal with tender on behalf of the firm. Offer will be summarily rejected in case of non-submission of such documents.
In case, tender has been submitted on behalf of Registered Society & Registered Trust, tenderer must submit following documents: (i) Certificate of Registration (ii) Deed of Formation. Offer will be summarily rejected in case of non-submission of such documents.
Tenderer must submit an undertaking that neither I/ We (name of the sole Proprietor Firm / Partnership Firm / Limited Company / LLP / Registered Society /Trust / JV firm) nor any of the partner or partnership firm / LLP / Member of Registered Society / Trust / Constituent of JV firm including partner of partnership firm in JV has / have been black listed or debarred by Railway or any other Ministry / Department / Public Sector Undertaking of the Government of India / any State Govt. from participation in tenders / contracts as on the date of opening of bids, either in our individual capacity or in any firm in which we were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. Offer will be summarily rejected in case of non-submission of such document.
An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/ are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.
In case, tender has been submitted on behalf ofcompany registered under Companies Act-2013,tenderer must submit following documents: (i)Memorandum of Association (MOA) (ii) Article of Association (AOA) (iii) Resolution passed by Board of Directors authorizing its Director / employee to deal with tender on behalf of company. Offer will be summarily rejected in case of non-submission ofsuch documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority
For those conditions for which standard formats have beengiven in the tender document, information should be submitted in these standard formats only.
Tenderer/s shall keep themselves updated about anymodification in tender notice and tender document, issuedby Railway through newspapers, website or E-mail or anyother means and shall act accordingly. It is theresponsibility of the Tenderer to check any correction or any modifications published subsequently in website and the same shall be taken into account while submitting the tender. Railway will not be responsible for offers submitted without latest corrections/amendments if any, by the tenderer/s.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may been countered in course of execution of work
Tenderer/s are requested to kindly carefully go through therelevant instructions /conditions / requirements containedin Tender documents / Bid documents / IRS General Conditions of Contract, as the case may be, before submitting the offer. Various conditions / instructions stipulated in complete tender documents will be taken as read and agreed if not specifically indicated to bedisagreed/ deviated.
Tenderer/s should normally not stipulate any specialconditions of their own, while submitting their tender, which materially alter the scope, payment conditions etc. of the tender, putting other tenderers at a disadvantage. In such eventuality, North Central Railway (NCR) reserves the right to reject such bids without assigning any reasons whatsoever.
P.Way maintenance work on DAQ-ALJN section in C/With ALJN-DAQ 3rd line & DAQ flyover work under Sr.DEN/IV/PRYJ in Prayagraj division of North Central Railway
CNB2025202610
CNB2025202610
Open
Works - General
12 Months
Kanpur Nagar, Uttar Pradesh
₹0
₹1.5 L
15 Apr 2026
27 Mar 2026
1 Apr 2026
27 items across 1 schedule · ₹93,81,464.14 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Using Soil Class SQ1 | cum | 2500.00 | 281.85 | 7,04,625 |
| 2 | 20 MT capacity | Day | 50.00 | 12,554.27 | 6,27,713.5 |
| 3 | Locations other than Ballasted Deck Bridge | Each | 500.00 | 438.94 | 2,19,470 |
| 4 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in-Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 1000.00 | 22.82 | 22,820 |
| 5 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 146080.00 | 3.83 | 5,59,486.4 |
| 6 | Lubrication of gauge face of rail on curves, cross overs, points & crossings, turn-in curves and at locations as required with contractor's grease graphite grade "O" IS 408 and as directed. | RM | 4000.00 | 3.31 | 13,240 |
| 7 | By using Railway's Grease graphite | Each | 500.00 | 28.99 | 14,495 |
| 8 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 2.00 | 7,875.97 | 15,751.94 |
| 9 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 13000.00 | 24.39 | 3,17,070 |
| 10 | Packing of isolated loose PSC sleepers on plain track below the bottom of t h e sleepers and surrounding through out its length duly opening two galas on either side of the renewed sleepers and packing the sleeper to bring the track to normal speed including gauging, aligning, squaring of sleepers and sectioning of ballast to the required profile with all contractor's labour, tools and plant etc. including all lead and lift and crossing of tracks where ever necessary complete and as directed by the Engineer-in-charge. | Sleeper | 500.00 | 75.21 | 37,605 |
| 11 | Slack picking of joint sleepers and 3 approach sleepers on either sides giving required lift to make up general track level, packing and profiling as directed. | Each | 200.00 | 524.56 | 1,04,912 |
| 12 | Without Rail tensor | TRM | 10000.00 | 32.67 | 3,26,700 |
| 13 | One Gang comprising of 20 physically fit labours plus 1 Mate. Note: In case, contractor provides less no. of Labour/Mate, payment will be deducted for each such labour @ 10% of the accepted item rate. | Gang Day | 365.00 | 14,299.88 | 52,19,456.2 |
| 14 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 15.00 | 1,685.87 | 25,288.05 |
| 15 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 25000.00 | 13.8 | 3,45,000 |
| 16 | Trimming of tree branches coming within 6m of centre line of track & those obstructing views of Curves/LCs / Signal / Indicator at locations in section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. Note: Girth of more than 20 cm will only be considered as tree branch. | Each | 100.00 | 158.89 | 15,889 |
| 17 | For lead up to 500 metre. | MT | 150.00 | 356.93 | 53,539.5 |
| 18 | For lead beyond 500 metre and up to 1 Km. | MT | 50.00 | 459.92 | 22,996 |
| 19 | For lead up to 500 metres | MT | 175.00 | 277.85 | 48,623.75 |
| 20 | For lead beyond 500 metre and up to 1 Km | MT | 50.00 | 411.36 | 20,568 |
| 21 | Lead up to 5 Km | MT | 20.00 | 159.36 | 3,187.2 |
| 22 | Lead beyond 5 Km and up to 10 km | MT | 60.00 | 200.54 | 12,032.4 |
| 23 | Lead up to 5 Km | MT | 50.00 | 52.99 | 2,649.5 |
| 24 | Lead beyond 5 Km and up to 10 km | MT | 300.00 | 94.18 | 28,254 |
| 25 | Level crossings with asphalted road surface | Sqm | 70.00 | 527.96 | 36,957.2 |
| 26 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each | 50.00 | 3,716.79 | 1,85,839.5 |
| 27 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 500.00 | 794.59 | 3,97,295 |
| Schedule total | ₹93,81,464.14 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS11.pdf
ATTACHMENT
Tender Booklet
ATTACHMENT
GCCApril2022UpdateduptoACS10Dt.04.03.20252_1.pdf GCC 2022
ATTACHMENT
GCCApril2022UpdateduptoACS10Dt.04.03.20252_1.pdf
ATTACHMENT
TenderBookletofMaintenanceoftrackDAQ-ALJN3rdline....15.04.2026..pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .