REPAIR TO PCC PATH, HARD STANDING, KERB STONES, CHEQUER TILES, INTERLOCKING TILES AND CERTAIN MISCELLANEOUS B/R REPAIR WORKS AT RAKSHA VIHAR COLONY UNDER GE (I) R and D KANPUR.

Amount

Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for Chequered cement concrete tiles Squared/rectangle 20 to 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors over and including cement screed bedding 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-30 grade with grey cement and no pigment over and including 20mm thick sand cusion complete all as specified and directed.

M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-30 grade with grey cement and pigment over and including 20mm thick sand cusion complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 in roof kerbs or mud stops,gola, rounded or chamfered on edges,complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / plinth protections, finished even and smooth without using extra cement incl necessary form work complete all as specified.

M&L for 40 mm thick PCC 1:2:4, Type B1, using 20 mm graded aggregate as in floors/paving/path etc, finished fair and even complete all as specified and directed.

S&F Glass dividing strips, 3 mm thick and 22mm width inserted in position, conform to design for PCC floor/ Path comnplete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening where required complet directed. (Note : Kerb stone shall be approved by GE (I) R&D).

M&L for applying two coats of synthetic enamel paint on new or old kerb stone surfaces over a coat of primer including preparation of kerb stone surfaces exc 10 cm width or girth, complete all as specified and directed.

Taking down cement plaster from RCC Chhajja, roof projection, fins and facia and other similar RCC items and M&L for 10mm thick rendering in cement mortar 1:3 finishing the surface even and smooth without using extra cement over 15 mm thick dubbing coat in cement mortar 1:3 complete including use and waste of nesessary form work and scaffolding work for repair upto 3rd floor roof if required complete all as specified and directed.

S&F in repair15mm bore CP Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed.

S&F in repair vitreous china squating pan, orrisa pattern of size 580x440mm white with integral foot rest with P or S trap including provision of cement concrete bedding(excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete/lime concrete bedding for taking out existing broken squat pan complete all as directed as site.

S&F in repairs 10 lit capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve etc, complete including 32mm dia flush pipe all as specified & directed.

S&F in repair PVC conneciton 450 cm long, 15mm size with PTMT nuts complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed.

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

M&L for Cutting chases, pinning in , for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth.

S&F in repair15mm bore stop/ Angle valve, cast copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or fur unions all as specified.

S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia and average width of aperture 1.40 mm upto height of 2nd floor complete all as specified and directed .

Demolition of sunken floor taking out all unserviceable material and deposited 50 mtr away all as directed by Engineer in charge.

M&L for 15mm thick cement screed in cement mortar 1:3 mixed with integral water proofing compound FOSROC's complast 421 IC @ 200 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for sunken slab complete all as specified and directed.

M&L for Providing and applying two coats of brush bond water profing coating intire surface of shunken portion including 15 mm thick plastring in cm 1:4 a bounding coat of fosrocs nito bound AR cement compete all as specified and directed.

M&L for Cement concrete 1:5:10 Type E2(using 40mm graded stone aggregate) in filling mass for Sunken floor compete all as specified and directed.

M&L for cement concrete (1:3:6) type C1 as in mass concrete (Using 20mm graged stone aggregate) concrete for Sunken floor complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in bedding, finished fair and even complete all as specified and directed.

M&L 65mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl all fittings (i.e. Bend/ TEE/ fixing ring etc as required) and joint made with cement sand mortar if required incl taking down existing pipe of any description complete all as specified and directed by Engr-in-charge.

Demolition of Brick work built in cement mortar complete all specified and directed.

M&L for bricks work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cm 1:6 all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles over and including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) including dismantling old tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 including dismantling old tiles complete all as specified and directed.

kumar Constructions

The Real Contractors

Vee Key Enterprises