SPECIAL REPAIR TO TOILET BLOCK NEAR BLDG NO 33 PROVN OF FLOORING AND PATHWAY AT CCSR AND SPL REP TO BLDG NO T 7 A IN AGE BR II AREA UNDER GE WEST LUCKNOW

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M&L for Brickwork with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash brick straight or curved on plan to any radius in half brick thick walls built in CM 1.4 exc 6m mean radius ccomplete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on brick work in CM 1:4 including using integral water proofing compound finished even and smooth without using extra cement complete complete all as specified and directed. Note:-WPC shall be measured & paid separetly.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for 5 mm thick rendering in CM (1:3 ) on ceiling surfaces finished fair and even complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed.

M&L for Non skid ceramic floor colour tiles shade as approved 7-8mm thick area of each tile exc 0.18 but n. exc 0.38 sqm set on 15mm thick in cement screed (1:4) and pointed incl white or colour cement to match complete all as specified and directed Make : NITCO/SOMANY/KAJARIA

M&L for glazed ceramic colour tiles of size ( 300 x450mm ) x 7-8mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 15mm thick screed in cm 1:4 complete all as specified and directed.

M&L in repairs for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.

M&L in repairs for GI tubing 20 mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.

Labour for cutting and chaseing in brick wall for concealed GI tubing and making good n.exc 10 cm in girth complete all as specified and directed.

S&F in repair 100 mm dia cast iron sand cast soil, waste and vent pipes in any length with or without ears with cemeny joints , fixed to walls complete all as specified and directed.

S&F in repair 75 mm dia cast iron sand cast soil, waste and vent pipes in any length with or without ears with cemeny joints , fixed to walls complete all as specified and directed.

S&F in repair 100mm bore brach pieces , bends single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door complete all as specified and directed.

S&F in repair 75 mm bore branch pieces , bends single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door complete all as specified and directed.

S&F in repair 100x75 mm dia cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S&F in repairs vitreous china coloured wash hand basin oval counter cabinet type size 560x470mm incl all necessary fixing arrangement and CP waste coupling & 32mm dia PVC waste pipe, complete all as specified and directed. Make : Nycer/Cera/Hindware

Refixing in repairs vitreous china coloured wash hand basin oval counter cabinet type size 560x470mm incl all necessary fixing arrangement and CP waste coupling & 32mm dia PVC waste pipe, complete all as specified and directed.

S&F in repair hand shower (Health fancet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality Make : Jaqur or equivalent of Marc/ESS-ESScomplete all as specified and directed.

S&F in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Refixing in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orrissa" pattern) size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed.Make : Nycer/Cera/Hindware

Refixing in repair vitreous china squatting pan "Orrissa" pattern) size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) pan coloured with “P” or “S” trap including connection to drain or outgoing and to syphonage pipe complete all as specified and directed.Make : Nycer/Cera/Hindware

S&F in repairs plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed.

S&F in repair 15 mm bore CP brass Pillar Tap fancy type fixed to GI pipe with complete all as specified and directed. Make : Jaquar/Marc/ESS

S&F in repair chromium plated long body bib cock 15mm bore pipe complete all as specified and directed.Jaqur /Marc/ESS

S&F in repair Angle valve/stop valve cast copper alloy with capstan head chromium plated half turn screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. Make : Jaquar/Marc/ESS

S&F in repair Push type flush valve for half stall urinal fancy type chromium plated standard quality 15mm dia connecting for iron pipe or for union complete all as specified and directed, Make : Jaquar/Marc/ESS

S&F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.

S&F in repair for 15mm bore PVC connection 600mm long with brass/PVC coupling and washer complete all as specified and directed.

S&F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality complete all as specified and directed.

S&F in repair CP Brass Tabular Towel Ring, 12mm dia complete set of superior quality complete all as specified and directed. Make Jaquar/Marc

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.

S&F in repair PVC rotational moulded over head water storage tank 1000 Litres capacity and removing from site complete all as specified and directed.

S&F in repair brass ball /float valve with PVC ball complete suitable for 20 mm bore pipe complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from sites complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and refixing in the same opening complete all as specified and directed.

S&F for Steel box type window/ventilators with both provision i.e. glazed and gauzed double panel/single shutters, Gauzed shutter shall be fixed in inner side and glazed shutter shall be fixed at outerside of the frame. The section of outer frame shall be 60 X 45 mm, F/S mullion/transum 60x30x25 mm, F/S shutter frame 50x35x20 mm, with handle and stoper of Z sec of size 20x25x20 mm. The section shall be made of ERW section of 16 gause. 02 Nos of box type hinges 75 mm long 12 mm dia with one part of hinges spot welded with frame and other with shutter for each openable shutter. 04 Nos of flat iron fast shall be welded with each window. 100 mm long handle and 150 mm long tower bolt shall be welded to each openable shutter. 10 mm square guard bar shall be provided @ 125 mm centre to centre and details shown in HQ CELZ Dwawing No. LZ/C-TD/130 SHT NO. 1/4 to 4/4 complete all as specified and directed. Note:- Glass panes and wire mess shall be measured and paid separately under schedule of items.

S&F 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S&F MS Butt hinges "medium weight" cold rolled mild steel 100mm size complete all as specified and directed.

S&F alumunium handle cast type anodised 150mm long complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core S&F in frame at site as per specification complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tonged, anodised, with hard drawn steel spring, fixed in floor size 150 mm complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exc 0.5 sqm each panes as directed.

S&F stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows complete all as specified and directed.

M&L preparation of old plastered/new plastered surface of walls by washing rubbing and applying two coat of cement based paint over a coat of white cement primer complete all as specified and directed.

M&L for washing rubbing down and stopping old/new treated plastered surface of walls including scraping where ever required and applying a layer of Birla putty base on scraped surfaced and applying two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L Demolition of sunken slab floor of WC WHB Trap,Urinal trap and floor trap at Ist floor including WC trap etc and providing water proofing treatment of sunken slab in following sequence complete (a) 15 mm thick rendering on vertical sides of RCC slab in cement mortar 1:3 mixed with water proofing chemical PIDIPROFF LW of Dr. Pidilite as per manufacturer instuction. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections (c) Fixing 40 mm dia PVC pipe 450 mm long bottom of sunken and wraping of bathseal tape on the pipes inserted through walls to floor srea and seal it. (bath seal tape product of Dr. Pidilite and grouting around the inserted pipes by porable. (d) Make angle fillets by mixing sand cement and DR.Fixit Pidicrete URP on all corners. (e) Brushing neat cement slurry 02 coats with high performance cementiceous polymer water proofing coating of Dr. fixit bathseal WPC for thickness of 1.00 mm in combination of WPC and cement (1:1.5) by volume and giving upto height 15 cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40 mm graded stone aggrgate mixed with WPC of Dr. Fixit as per manufacturer instruction in suken slab. (g) Fill the sanitary gaps with Dr. Pidilite sealing compounds complete

M&L for provn of roof treatment with polymeric water proofing membrance with brick tiles as under including taking down of existing roof treatment: (a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumen primer conforming to IS 3384 @ 0.40 Itrs/sqm and allow to dry. (c ) Applying one coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm. (d) Applying and laying 3 mm thick APP having non- woven polyster matt at core and under surface coated with plastic polythene film. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm. (g) S&F Precast machine pressed cement concrete tiles of size 250 x 250 x 20 - 22 mm or 200 x 200 x 20 - 22 mm conforming to IS : 1237-1980 shall be laid over 12 mm thick cement mortar screed in 1:4 & jointed Flush pointed with CM in 1:4 mixed with integral water proofing compound.

. Ditto- all as per item No 61 above but on vertical surfaces without brick tiles as invertical serfaces complete all as directed at site.

M&L for PCC 1:4:8 type D-2 using 40mm graded aggregate as in foundation filling & mass concrete all as specified.

M&L 15 mm thick rendering in CM (1:4 ) on fair faces of brick wall or concrete surfaces finished fair and even all as specified.

Supply only integral water proofing coumpound complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat oil bound distemper over a coat of 1mm thick birla putty incl preparation of old surfaces etc complete all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W(Gde-E-250) quality-B including all necessary MS plates nut bolts etc all as specified & directed.

S&F Steel work in tubular trusses, purlin & rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

M&L Preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil.

Ditto all as per item No 43 but sectional area exc 1.5Sqm but n.exc 4 Sqm. complete all as directed.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS

M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F Mild steel 1.25mm Plain back sheet covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc complete

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complet

M&L for mild steel work as in bands, straps, clamps, hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or refters, and similar samll articles confirming to Fe-410-0 or Fe-310-0 all as specified.

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified.

Supply& fix in repair 150mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete as directed.

M&L preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete as directed.

Demolition of PCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified.

M&L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement, complete, all as specified & directed.

Supply only Glass dividing strips, 3 mm thick complete all as directed.

Demolition of RCC roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work reinforcement cut as required to facilitate demolition

M&L Reinforced Cement Concrete 1:2:4 type B1 using 20 mm graded crushed hard granite stone aggregrate as in slab supported on walls, beams and columns in floors, roofs, landings,in selves etc incl necessary form work complete all as directed.

S&F mild steel deformed or tweisted bars 8-10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as directed.

M&L Use & waste form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified & as directed.

M&L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed. Make : Somany/Johnson/Kajariya/Sunheart/NITCO.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:12 in alternative bays not exceeding 2.5 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

S&F in repair PVC (SWR) pipes in any lenth fixed to wall 110 mm bore complete all as directed.

S&F PVC bends 110 mm bore complete all as directed.

Supply and fixed in repair 100 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&LTreating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L 40mm thick Damp proof course 1:2:4, type B-O including WPC @ 3% by wt of cement to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Supply only integral water proofing coumpound complete all as specified and directed.

M&L for 75 mm thick Cement concrete PCC 1:4:8 type D-2(using 40 mm graded granite stone aggregate) in sub base of flooring.complete all as specified and directed.

M&L for 18-20mm thick Kota Stone laid and jointed in neat cement slurry including labour for cutting and polishing of Kota slab laid over 20mm thick screed bed (1:4) including 30mm thick PCC 1:2:4 type B-1 as in sub base complete all as specified

M&L Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar including labour for cutting and polishing of Kota slab laid over 15mm thick CM 1:4 cement screed and jointed complete

M&L Providing precast cement concrete type B-1 1:2:4 set in CM 1:4 in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns,posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat ing etc. and setting in mortar complete with joints to match

M&L Hard core of gauge nexc 63 mm graded stone aggt deposited spread and levelled in layers nexc 15 cm thick watered and rammed to a true surface.

Providing and laying of Machine pressed pressed precast conctete interlocking paver block any shape and size of 60mm thickness, M-35 Grade as specified & directed over and including 25mm thick sand cushion and joint filled with fine sand including leveling tamping & sweeping etc all as specified & directed

Spreading and levelling in layers n exc. 25 cm thick add for well ramming including watering as required complete all as specified and directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls as directed.

M&L Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metallic concealed PVC conduit 20mm dia ISI Marked with concealed conduit wiring with all conduit accessories fixed on surface of walls/ceiling pressed steel terminal boxes not less than 1.6 mm thick concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer plastic laminated top sheet cover 3 mm thick of required size hylam brand and colour for housing switches, and sockets 1.5 Sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified . (a) One light/fan point controlled by one switch

Supply and fixing in replacement of wall/surface mounting luminaries (mirror light) 9 W LED Batten of size 600 X 25 X 40 mm with polycarbonate housing & integrated electronic driver complete all as directed. All as per Make Havells / Philips/bajaj/CG

S&F sheet metal enclosure (MCB DB) when NCB to be used, single phase and neutral with 200 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and directed at site.

Supply and fixing in repairs LED tube light fitting 1x22 Watts (110 lm/W), NW 4000K/CDL 6500K, 4 feet wall mounted LED batten type, extructed aluminium housing (enhanced safety) with high quality polycarbonate diffuser including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed by Engr-in-charge. Make:-Philips/HPL/Wipro

All as per item 119 (a) here in before but using 2.5 Sqmm PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed. (Make: Anchor Penta/SSK/)

S&F switch piano flush button single pole one way 5 Amp 240 volt complete as directed. (Make: Anchor Penta/SSK)

Ditto all as per above but 15 Amp complete all as specified.

S&F of ceiling rose surface Bakelite three terminals complete as directed. (Make: Anchor Penta/SSK)

S&F in repairs MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity complete as directed. All as per Make: Havells/C&S/Legrand)

S&F in repairs MCB single pole and neutral (16 to 40 Amp) 240 volts 10 KA breaking capacity complete as directed. All as per Make: Havells/C&S/Legrand)

Supply and fix in repairs ultra bright polycarbonate LED tube light 20 watt with high efficency, single side connection with all fixing arrangement complete standard fittings anf fixtures complete all as specified

S&F in repairs of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM with suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed by Engr-in-charge. Make- Crompton Greaves/bajaj/Havells (Note Old existing fan shall be deposited in MES store yard.)

chandra kaushal supplier

shiva enterprises