Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹3.8 LAccepted-Finance | 1st | Accepted-Finance Reasonable rate | |
| 2 | 2nd₹4.0 L+₹18,425 (4.83%)Rejected-Finance | 2nd | Rejected-Finance Higher rate | |
| 3 | 3rd₹4.2 L+₹37,975 (9.95%)Rejected-Finance | 3rd | Rejected-Finance Higher rate | |
| 4 | 4th₹4.4 L+₹55,225 (14.5%)Rejected-Finance | 4th | Rejected-Finance Higher rate |
Tender Value
Refer Docs
EMD Value
₹9,478
Closing Date
28 Oct 2020, 12:15 pmClosed
Executive Engineer
University of Delhi South Campus
ONLINE TENDER FOR Road repair Bituminous carpeting backside road VB 1, 3,5,7 and road housing type V IV Q.No. 1 to 16, SDC.
2020_DU_588884_1
SC-M-14/1220 A
Open Tender
Civil Works
Works
7 days
New Delhi
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Director University of Delhi South Campus
₹9,478
Yes
29 Oct 2020
7 Oct 2020
29 Oct 2020
7 Oct 2020
28 Oct 2020
7 Oct 2020
Disposal of malba out of Campus.
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On bituminous surface @ 0.50 Kg / sqm
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
Rajeev Jain
M/S Ishwar Singh & Bros
RAJESH KUMAR GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .