Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹41.3 CrAccepted-AOC | ₹41.3 Cr Quoted ₹42.0 Cr | 1st | Accepted-AOC 1ST LOWEST BIDDER |
| 2 | Rejected-Technical MULUND | AHMEDNAGAR | MAHARASHTRA | 413201 | - | - | Rejected-Technical document not fullfill |
Tender Value
₹37.9 Cr
EMD Value
₹19.0 L
Closing Date
8 Oct 2024, 4:00 pmClosed
City Engineer
City Engineer, 3 rd floor, Thane Munipal Corporation PAchpakhadi Thane THANE
Construction of parking facility on Maharashtra Jeevan Pradikaran Land near Gadkari Rangayatan in Thane Municipal Corporation area.
2024_TMC_1100648_1
TMC/PRO/PWD-HQ/632/2024-25
Open Tender
Civil Works - Others
120 days
TMC Thane
Please refer Tender documents.
2 documents required · 2 mandatory
₹11,800
₹19.0 L
6 Jun 2025
1 Oct 2024
8 Oct 2024
1 Oct 2024
8 Oct 2024
1 Oct 2024
Amount
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.
Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.
Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
Taking trial bores 75 to 100mm for 53.0 to 88.9 mm core dia overburden (by diamond drilling machine)such as soil of all sorts,soft murum,hard murum and boulder sand in soft rock including all materials such as casing pipes and accessories oil, grease, steel rods and such other materials as required (including conveying the material to site of work). Preserving the loose sample in glass jar and core sample serially on site of work and conveying the same to HQ of concernring office as directed . a) overburden 0 to 50 meter
Taking trial bores 75 to 100mm for 53.0 to 88.9mm core dia in rocks as specified below including all necessary materials such as oil, grease, steel boostan and such other materials as required (including conveying the material to site of work ) and Preserving the core sample serially on site of work and conveying the same to HQ of concernring office as directed. Quartzite with diamond drill with Nx Bit 0 to 50 metre
Providing tun tuppa core boxes of jungle wood of size 1.25 m x 0.35 x 0.15 m for preserving core sample with all fixtures and fastening handles including locking arrangment etc. complete.
Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.
Cutting down trees including trunks and branches with girths above 90cm to 180cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
Providing & Erecting GI Sheet Barricading including structural steel work, fixtures and fastening, removing and disposing the same after completion of work etc. Complete
Providing and laying cast in situ / ready mix M40 RCC for 600 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
Chiseling through pile shells in hard strata like boulders, soft and hard rocks Upto and inclusive of 550 mm diameter including removing and stacking the loose materials etc. complete and disposing of the unserviceable materials outside complete.
Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 400 mm and upto to 550 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
Empty boring for 625 to 700 mm dia. bored R.C.C. cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metres etc. complete. Spec :(As directed by Engineer in Charge)
Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps. Spec :(As directed by Engineer in Charge
Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to required diameter and shape ,welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in charge. Spec :(As directed by Engineer in Charge From 3.00 to 9.50 meter deep liner
Carrying out low strain pile integrity test on 600 mm diameter pile including all arrangements for test, equipments/accessories, materials, labour, submission of test report etc but excluding the cost of installation of job pile (installation of pile shall be paid seperately as per releventitems)all complete as per specification and as directed by the engineer-in-charge.
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap metal for R.C.C. pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, laying/ pumping, compacting, finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) complete (Excluding steel reinforcement)
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete.
Providing Soling using 80mm size trap metal in layers of 15 cm each including filling voids with sand, ramming, watering etc. complete.
Filling in plinth and floors with Contractor materials brought from out side in 15cm to 20 cm layers including watering and compaction complete.
Providing preconstructional antitermite treatment as per I.S.6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor beam
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and fixing in position - M.S. / H.Y.S.D. /T.M.T. bar reinforcement of TATA TISCON / SAIL / JSW / ESSR or equivalent make (confirming to IS code ) of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designns, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting asrequired complete. TMT _ Fe-500 / Fe-415
Providing and fixing in position after hoisting precast 1:2 cement mortar reinforced jali 50 mm thick of approved design in cement mortar 1:3 and curing complete. (including 6 mm dia. Mild steel bar reinforcement)
Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing mortar of fix block of in superstucture including, striking joints, racking out joints watering and scaffolding etc.complete
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625x 240x100)mm in extra fine jointing mortar of fixoblock of in half brick thick wall including 2 hoop iron strips 25mm x 1.6mm at every third course,properly bend and bonded at ends scaffolding racking out joints and watering compete
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. Complete.
Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)
Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. Complete.
Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. Complete
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. Complete.
Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kilogramme / 50 kg of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8 mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. Complete.
Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc. Complete.
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. Complete.
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. Complete. For Door Frames -
Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. Complete. For Flooring -
Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. Complete.
Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. Complete.
Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. Complete
Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. Complete.
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete
Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame)
Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kilogram/Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. Complete
Fire Door 55mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. Complete.
b)Shutter : Supplying & Fixing of 55mm thick asbestos free criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2x8mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 3mm Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external liping. Ground Floor
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box
Providing and fixing in position powder coated aluminium louvered windows / ventilators (IS std.) of various sizes with powder coating as per detailed drawings and specifications including aluminium frames 80 X 38 mm box type 5 mm thick sheet glass louvers, clips / rubber plain P.V.C. gaskets of approved quality etc. complete (Sample to be got approved from Ex. Engineer before use)
Providing and applying two of lead/zinc base oil paint/ bituminous paint of approved colour, shade and quality to new wood work and fibre boards previously painted by the surface, knotting, scaffolding if necessary scaffolding, excluding primer coat complete.
Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC‘s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Ground Floor
Providing and applying one coat of seal cement primer of approved manufacture and shade, including scaffolding if necessary, cleaning the surface etc. Complete.
Providing and applying white wash of approved quality in two coats on old/new plastered or masonry surfaces & asbestos cement sheets, including scaffolding and preparing the surface by brushing and brooming down complete. Ground Floor
Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)
Providing and fixing collapsible steel gate in one / two leaves with hot rolled verticl channels of18X 9 X 3 mm minimum size , crossing of M. S. flats of size 18 X 5 mm T or E section for runner of minimum size 40 X 12 mm with roller wheels cofirming to grade F G. filted withsnap headed rivets of minimum size 6 mm maximum spacing of vertical channels be 100 mm enclosed gate position and clear spce of 150mmbetween 2 sets of crossings with hold fasts stoppers spcess handles locking arrangement and one coat of red lead primer and oil painting etc complete
providing and fixiing HDP container Sintex or equivalent make confirming to 15 spce. One piece moulded water tank made out of high density polythylerand build corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters
Providing and fixing 45cm wide steel ladder of 40 X 6 mm mild steel flat stringers and stepsof 18 mm diameter mild steel bar including fixing it in M-15 cement concrete block 60 X 30 X 30cm and painting the ladder with antirust primer and 2 coats of oil paint.
Transportation of excavated earth including loading and unloading per truck trip of 6.00 cu M Capacity per trip 5 km
Providing and fixing 450mmx550mm size superior type Belgium mirror 16mm die nickel plated towel rod etc. Complete.
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both side, deep M.S. Channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with Square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. Sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete.
Providing and fixing mild steel grill railing 20 kg/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish
Providing and laying wedge shear elemental layer (WSEL) by using rubble stone of size 15 to 20 cm thick in single layer of 230 mm including packing the same with 20 mm to 40 mm thick aggregates ( normal size) and using stone powder of 40 mm to 50 mm thick on surface and watering & compacting by vibratory roller confirming layer thickness of minimum 200 mm and as directed by Engineer - in - charge etc complete.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate)
Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/ contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed.
Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wraping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.
Providing and Placing 5mm thick Thermocole or equivalent material in dummy and construction joints immdtly after cutting of joints and removing the same before dressing of dummy and construction joint as directed etc. Complete.
Providing and construction of cement vatta in C.M.1:10 at 0.6 M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m at top and 0.075 m deep and maintaining the same throughout 7 days curing period and removing the same material as directed.
Sealing of M-35 & above new C.C. pavement dummy, transverse, longitudinal joints with hot rubberised sealing compound confirming to IS 1834-1984 after proper cleaning with compressed air, applying required primer & providing a layer of lime powder over hot sealing compound as directed. Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse & longitudinal joints
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.
Material Testing - Cement Standard Consistancy, Fineness,Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness
Material Testing - Sand (i) Fineness Modulus (Sieve Analysis), Stilt & Clay Content
Material Testing - Sand (ii) Chloride and Sulphate Content
Material Testing - Sand (iii ) Silt Factor
Material Testing -Metal I & II (i) Water absorption, Specific Gravity, Impact Value/Crushing Value
Material Testing -Metal I & II (ii) Sieve Analysis
Material Testing -Metal I & II (iii) Abrasion Value
Material Testing -Metal I & II (iv) Flakiness Index & Elongation Index
Material Testing -Metal I & II (v) Stripping Value (for Bituminous work)
Material Testing -Metal I & II (vi) Soundness
Material Testing -Water PH Value, Sulphate & Chloride Content
Material Testing -Concrete (i) Concrete Mix Design (with all tests on basic materials)
Material Testing -Concrete (ii) Compressive Strength of C.C. Cube (Set of 3 cubes) for all grades of concrete
Material Testing -Concrete (iii) Permeability Test
Material Testing -Concrete (iii) Flextural strength Test
Material Testing -Concrete (iv) Taking of Core samples in concrete pavement (Excluding Dead Journy Charges)
Material Testing -G.I. Pipes Weight per running meter, Diameter of pipe & wall thickness of pipe
Material Testing -G.I. Pipes Weight of Zinc coating per sq.m.
Material Testing -Soil/ Murum Sieve analysis
Material Testing -Soil/ Murum Plastic Limit & Liquid Limit
Material Testing -Soil/ Murum Compaction Test (proctor Density)
Material Testing -Soil/ Murum CBR Test (Lab) with compaction test
Material Testing -Soil/ Murum Field Density by sand replacement method
Material Testing -Soil/ Murum Free swell test for soil
Material Testing -Steel Bar Testing (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.) 8mm to 16 mm (Set of 3 Bars each dia)
Material Testing -Steel Bar Testing 16mm & above dia (Set of 3 Bars each dia)
Plumbing Work - Water Supply Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings,remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.
Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
Providingandfixingonwalls/ceiling/floors,80mmdia.heavygradehavingembossedasISIMarkgalvanisedironpipesweightof10.15Kilogram/meterwithnecessaryfittings.andremakinggoodthedemolishedportionandapplyingprimerofanticorrosiveoilpaint2coatsIncludingnecessaryscaffoldingandremovingexistingpipelineifnecessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete
Providingandfixingonwalls/ceiling/floors,100mmdia.heavygradehavingembossedasISIMarkgalvanisedironpipesweightof14.74Kilogram/meterwithnecessaryfittings.andremakinggoodthedemolishedportionandapplyingprimerofanticorrosiveoilpaint2coatsIncludingnecessaryscaffoldingandremovingexistingpipelineifnecessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete.
Providingandlayingintrenches25mmdia.mediumgradehavingembossedasISIMarkgalvanisedironpipes?of2.49Kilogram/meternecessaryfittingremakinggoodthe?demolishedportionwithfillingtrenchesandwithprimerofanticorrosiveoilpaint,2coatsIncludingremovingexistingpipelineifnecessaryandconveyingandstackingthesameinPWD chowky or as directed etc. complete.
Valves & Accessories Providingandfixing25mmdiameterwatermeterwithnonreturnvalveincludingstrainer,sockets union nut and including water meter box making locking arrangement and lock.[Without chamber]
Stop Tap Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.
Butterfly Valve Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV
Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV
Non Return Valves Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV
End Line Strainer Supplying and erecting 75/80 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS
Pressure Reducing Valve Supply, Installation, Testing & Commisioning of Pressure Reducing Valve with Bypass Arrangement complete for modulating pressure as per required for 25 Dia Pipe.
Supply, Installation, Testing & Commisioning of Pressure Reducing Valve with Bypass Arrangement complete for modulating pressure as per required for 32 Dia Pipe.
Supply, Installation, Testing & Commisioning of Pressure Reducing Valve with Bypass Arrangement complete for modulating pressure as per required for 40 Dia Pipe.
Supply, Installation, Testing & Commisioning of Pressure Reducing Valve with Bypass Arrangement complete for modulating pressure as per required for 50 Dia Pipe.
CP Fixtures, CP Fittings & Accessories Providing and fixing European type white glazed earthen ware coupled closet symphonic trap with symphonic low level white glazed 10litre scistern with black back lite seat with all necessary pipe connection etc. complete.
Providing and fixing orissa type colour glazed earthen ware 625 x 450mm. w.c. Pan including trap, C.I.soil and vent pipe upto the outside face of wall including100mm. dia.C.I.plug, bend,15mm. thick 10litre PVC flushing cistern with all necessary pipe connection etc. complete.
Providing and fixing coloure dg lazed earthen ware Wash Hand Basin of 63 cm x 45 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap upto the outside face of the wall.
Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.
Providing and fixing of approved make white aquafree Waterless Urinal of with cartride size of 31.5 x 33 x 60cm including other necessary fittings etc. complete.
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.
Supplying and erecting storage type horizontal / vertical water heater 25 litres capacity with BEE 5 star rating high impact resistance engineering plastic body on wall / loft complete duly tested and marking sr. no. and date of erection. specification no.AP-WH/STWH.
Providing fibre reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1set of 2 nos) complete.
Providing and fixing Shower Head with shower arm of approved make shower tube hand shower with divertor of spout including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge
Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete.
C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751 )
C.P.soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733 )
C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N )
C.P.Towel rail 24" jaquar make continental (Cat. No. ACN 1111N )
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge
Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etc complete as directed by Engineer in charge.
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
Providing and fixing Autoclosing pillar cock of pressmatic tap of approved make or equivalent including all fixtures, fittings etc.complete.
Internal Drainage Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug,bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
Supply, Installation & Testing of PVC SWR Pipes(IS 13592) with fitting & required cop of minimum pressure rating of 6 Kg / cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip(O) ring & rubber lubricant for connection. – TYPE (B) ( 6 Kg / Cm2) – 75 mm Dia
Supply, Installation & Testing of PVC SWR Pipes(IS 13592) with fitting & required cop of minimum pressure rating of 6 Kg / cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip(O) ring & rubber lubricant for connection. – TYPE (B) ( 6 Kg / Cm2 - 100 mm Dia
Supply, Installation & Testing of PVC SWR Pipes(IS 13592) with fitting & required cop of minimum pressure rating of 6 Kg / cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip(O) ring & rubber lubricant for connection. – TYPE (B) ( 6 Kg / Cm2 - 150 mm Dia
Supply, Installation & Testing of PVC SWR Pipes(IS 13592) with fitting & required cop of minimum pressure rating of 6 Kg / cm2 (IS 14735) for drainage in sunken / raised / shaft area with all necessary Lip(O) ring & rubber lubricant for connection. – TYPE (B) ( 6 Kg / Cm2 - 200 mm Dia
Cast Iron Pipe Providing and laying cast iron pipes of B class of 150mm diameter with sockets and spiget ends/ flanges and cast centrifugally/ vertically including specials, laying pipes and back filling the trench complete including excavation.
Providing and making lead joints for 150mm diameter cast iron pipe line including lead and testing
Providing and making flanged connection for the 150mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete.
Providing and laying cast iron pipes of B class of 100mm diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation.
Providing and making lead joints for 100mm diameter cast iron pipes line including lead and testing.
Providing and making flanged connection for the 100mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete.
Providing and laying cast iron pipes of B class of 80mm diameter with sockets and spigot ends/ flanges and cast centrifugally / vertically including specials, laying pipes and back filling the trench complete including excavation.
Providing and making lead joints for 80mm diameter cast iron pipe line including lead and testing.
Providing and making flanged connection for the 80mm diameter castiron pipe line including painting rubber insertion, nuts and bolts etc.complete.
External Drainage Chambers Providing , constructing and fixing 600 mm dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 mm diameter nlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.
Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 kg. etc complete
RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge
External Piping Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.
Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.
Providing and laying for 225mm dia. salt glazed S.W. Pipe including fitting such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete
Providing and laying concrete pipes of I.S.NP. class of 100mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
External Trench Sup[ply & installation of 600mm Wide heavy duty FRP covers with required accessories & fittings.
Construction of trench 450mm wide X 450 depth in masonry for Rain water line with 150mm thick wall resting on 1:4:8 concrete foundation with 6" PCC M15 benching with desired channel alignment. The inside face to be smooth plastered with 15mm thick plaster of cement mortar 1:2. with with required FRP cover.
PUMPS Supplying, erecting, testing and commissioning of minimum three & above starrated submersible pumpset of 3 kW/4 HP with 415 V, three phase, 50 Hz A.C.supply suitable for 150 mm dia. borewell with 130 to 500 lpm discharge at 49 to18 m head & discharge & delivery pipe of size-50mm dia. with a necessary H typeclamps as per specification no. WP-SMP.
Supplying, erecting, testing and commissioning of D.O.L starter suitable for 400V, 3 phase 50 Hz with no volt coil and overload element with necessary materialsand connected to supply above 3 HP to 7.5 HP.
FIRE FIGHTING Supplying, installation, testing and commissioning of main fire pump (MFP /EP) suitable for water discharge of 2280 to 2850LPM at 80 to 60 m headdriven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45kW or ofsuitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body &bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conformingto IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitablefor operation with IP 55 protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation boltsetc. as required.(d) Erected on provided suitable size cement concrete foundation duly plasteredwith anti vibration pads with perfect aligning, proper levelling complete pump setwith accessories duly painted with two coats of synthetic enamel paint of fire redcolour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/SSC/EP
Supplying, installation, testing and commissioning of jockey fire pump (JP)suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven byelectric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitablekW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast ironbody & bronze impeller with stainless steel shaft(SS410 grade), mechanical sealconforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitablefor operation with IP 55 protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundationbolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plasteredwith anti vibration pads with perfect aligning, proper levelling complete pump setwith accessories duly painted with two coats of synthetic enamel paint of fire redcolour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, asper specification no. FF-MFP/JP
Supplying, installation, testing and commissioning of booster fire pump [BP]suitable for water discharge of 900 LPM at 35 m head driven by electricmotor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kWcapacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of castiron body & bronze/CI impeller with stainless steel shaft (SS410 grade),mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitablefor operation on with IP 55 protection for enclosure, horizontal foot mountedtype with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundationbolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plasteredwith anti vibration pads with perfect aligning, proper levelling complete pump setwith accessories duly painted with two coats of synthetic enamel paint of fire redcolour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/BP
For main electric motor driven fire hydrant system pump of 45kW capacity &relevant capacity jockey pump add Rs….
For main electric motor driven fire sprinkler system pump of 45kW capacity(1Working) & relevant capacity jockey pumps (1working+1standby, alternate runper start in auto mode, add Rs…
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 25mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 32mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 40mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 50mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 65mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 80 mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 100 mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 150 mm
Supplying and erecting G.I. pipe ‘C’ class ERW mm dia with necessaryfittings duly painted with two coats of synthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as perspecification no. FF-PP ------- 200 mm
Providing coating of bitumen paint & pipeline corrosion resistant Pypkotetape conforming to IS 10221 Appendix B specification having 4mm thickwrapping for underground 100 mm ring main of fire fighting system.(Pypkote tape comprises of a Tar based Polymeric mix supported on a fabric ofhigh tensile strength Fibreglass).
Providing coating of bitumen paint & pipeline corrosion resistant Pypkotetape conforming to IS 10221 Appendix B specification having 4mm thickwrapping for underground 150 mm ring main of fire fighting system.(Pypkote tape comprises of a Tar based Polymeric mix supported on a fabric ofhigh tensile strength Fibreglass).
Supplying and erecting mm dia Cast Iron end line strainer of Y-typeflanged end pattern, PN16 pressure rating, SS screen, end connection withFlanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification no. FF-VL/ELS ------ 100mm
Supplying and erecting mm dia Cast Iron end line strainer of Y-typeflanged end pattern, PN16 pressure rating, SS screen, end connection withFlanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification no. FF-VL/ELS ------ 150 mm
Supplying and erecting mm dia Cast Iron end line strainer of Y-typeflanged end pattern, PN16 pressure rating, SS screen, end connection withFlanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification no. FF-VL/ELS ------ 200 mm
Supplying and erecting mm dia. cast iron double flange butterfly valve ofsize complete with PN16 pressure rating, as per specification no. FF-VL/BFV -------------- 50mm
Supplying and erecting mm dia cast iron double flange NRV completewith PN16 pressure rating, as per specification no. FF-VL/NRV ------------ 80mm
Supplying and erecting 25 mm Ball Valve complete with PN16 pressure rating,as per specification no. FF-VL/BV --------- 25mm
Supplying and erecting, testing and commissioning of 150 mm dia. installationcontrol valve(Alarm Valve) of cast iron body, brass/bronze working partscomprising of water motor alarm, bronze seat clapper, clapper arm andhydraulically driven mechanical gong bell to sound continuous alarm when thewet riser/sprinkler system activates, pressure gauges, emergency releases, strainer,pressure switch,cock valve complete with drain valve and bypass, test control box,ball valves, MS pipes of required size, flanges, orifice plate, gasket etc. complete asper specification no. FF-VL/ICV
Supplying and erecting stainless steel single outlet hydrant valve fitted withnecessary accessories complete as per specification no. FF-VL/HV
Supplying and erecting 63mm dia, controlled percolation (C.P.) hose pipe,15m in length, fitted with necessary accessories complete as per specificationno. FF-FFA/CPH
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hosepipe, 15m in length, fitted with necessary accessories complete as perspecification no. FF-FFA/RRL
Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20mm dia detachable hexagonal nozzle complete as per specifications no. FFFFA/NZ
Supplying and installing wall mounting swinging hose reel drum fitted with 19mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessaryaccessories complete as per specification no. FF-FFA/HV
Supplying and erecting 19 mm dia gun metal chrome plated nozzle completeas per specification no. FF-FFA/NZ
Supplying and erecting 150 mm dia fire brigade header suitable for supplyingwater in fire tank complete as per specification no. FF-FA/FBC
Supplying and erecting fire brigade header ( Siamese connection )of 150 mmdia, for supplying water in fire tank complete as per specification no. FFFA/FMC
Supplying and erecting 300 mm dia 1.5m in height air vessel / tankfabricated from min 5mm thick M.S. sheet complete as per specification no.FF-FFA/ACT
Supplying and erecting 20/25mm dia gun metal air release cock, withnecessary G.I. coupling to be fitted on top of air vessel or on wet riser completeas per specification no. FF-FFA/ARV
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg percm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I.pipe, elbow etc. complete as per specification no. FF-FFA/PG
Supplying and erecting 12/15 mm dia pressure switch with provided isolationvalve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrantvalve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.)made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doorswith viewing glass (8"x6") and locking arrangement with necessary fixingmaterial such as rubber bidding etc. duly painted with two coats of syntheticenamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932of 2003)
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade /SIAMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheetand angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass(8" x 6") and locking arrangement with necessary fixing material such as rubberbidding etc. duly painted with two coats of synthetic enamel paint of fire redcolour over a coat of primer (ISC code 536 as per IS 2932 of 2003)
Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoidbulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixedtemperature rating with deflector disc of conventional construction complete asper specification no. FF-SPR./UP
Supplying erecting, testing and commissioning of sprinkler flexible pipe ofstainless steel complete with 15 NPT on reducer thread with maximum workingpressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet)25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female threadwith reducer, nipple, 2 side brackets, center bracket, stockbar of 1500 mm size(UL Listed) complete as required as per specification no. FF-SPR/FHP
Supplying and fixing of self expanding, ready to use polyurethane(PU) foamsealant of minimum 750ml bottle, suitable to seal the openings of all kinds ofcables, pipes and cable support system in steel, aluminium and plastic profiles (except hollow core conductors). Sealant shall have minimum 2 hour fire rating ,conforming to EN 1366-4:2021 as per specification no FF-FRS.
S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg.capacity cartridge type conform to IS 2878 /15683 complete erected withnecessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wallcomplete.
Providing and fixing Mechanized Car Parking Tower as per detailed attached in Annexture A
Garden Soil - Supplying on site garden soil well sieved 90 5 through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally is red. The soil will be measured by measuring box.(Farma). Item includes royalty charges, corporation charges , transporting, loading/unloading etc. (Lead charges per 90Km. considered.)
Farm Yard Manure - Supplying on site well decayed, well dried, well powdered without clods and free from stones rubbish like dried grass roots and other such materials. The colour of the manure generally is black. The manure will be measured by measuring box.(Farma). Item includes transporting, loading/unloading etc. (Lead charges per 50Km. considered.)
Filling fresh garden soil/silt & manure in sxcavated area including lead upto a distance of 50m (1/10 of unskilled labour)
Mixing garden soil/silt & manure thorougly well, watering previous night. Panting required plant species, lawn grass as directed etc. complete. (1/10 of semi-skilled labour)
Sapling of flowering/shady trees Gulmohar, rain tree, Peltophorum etc. in polybag (ht. min upto 2-2.5mtr.)
Common ornamental shrubs for shrubbery (1 Feet grown in poly bags.)
Areca Palm (6-8 Feet)
Plants required for landscaping - (Euphorbia, Hemelia, Malphegia, Mussanda, Ticoma, Song of India, Golden Bamboo, Buddhas Bamboo, Golden Ficus, Phonicus Palm, X-mas tree, Ficus Panda, etc.) Ploybag size 16X16 inches. Height of plant 5-6 Feet.
Preparing Lawn(30 cm. depth):- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and mixing thoroughly well, levelling and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling etc. complete.
Preparing Edging or Border:- Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms.Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height of 20cms. Mixing,levelling and wateringon the same. Planting, watering, weeding, stirring of soil, replacing casualties, pruning if necessary etc. complete.
Preparing Flower Bed:- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and mixing thoroughly well, levelling and watering on previous night. Planting seedling of required annuals 25cms. apart maintaining till well established by watering, weeding, stirring of soil, replacing casualties etc. complete.
Planting large flowering/shady trees (ht. 2 mtr.):- Digging pit with size 0.9X0.9X0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.3m and remaining height of 0.60 m with fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, levelling and watering on previous night.Planting two to three three year old minimum 2.0 meter height healthy trees sapling as per specifications, maintaining till well established replacing casualties etc. complete.
Electrical works 1.1 Concealing of Conduits Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.
Supplying & laying HMS PVC conduit 20mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.
Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.
Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.
Supplying & erecting HMS PVC conduit 32mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.
Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.
Concealing of provided G.I. pipe/H.G. screwed conduit/PVC pipe inwall/floor/false ceiling complete as per specification No:WG-PW/CW
1.2 PVC Flexible/Rigid Conduits/Casing-n-Capping/Under Floor Trunking / Raceways and Box System Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit
Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit.
1.3 Bunch of Wires Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places as per specification No: WG-MA/BW
Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW. (Note-3-Rates of earth wire shall be calculated as one half rate of mains of bunch of two wire)
Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other placesas per specification No: WG-MA/BW
upplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1.5 Wiring Accessories Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/PVC junction box.
1.6 Modular switches and Accessories Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type computer Jack RJ45 with safety shutter,duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type bell indicator, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type buzzer 220 / 250V, duly erected onprovided plate and box with wiring connections complete.
Supplying and erecting modular type (two module) electronic step regulatorfor fan,duly erected on provided plate and box with wiring connections complete
Supplying and erecting modular type blanking plate one module, duly erectedon provided plate & box.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1.7 Point Wiring Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
Point wiring for independent plug, concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as perspecification No WG-PW/SW
Secondary point wiring for additional light/bell point in min 20mm PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification no. WG-PW/SW
1.8 Telephone, Audio and Video Wiring Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid inprovided PVC casing capping/conduit as per specification No. WG-TW
Supplying & erecting 10 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid inprovided PVC casing capping/conduit as per specification No. WG-TW
1.9 Telephone Accessories Supplying, erecting & commissioning MDF Box 50x50 pairs made from min.1.5mm thick MS sheet as per specification no. WG-TA
Supplying, erecting & commissioning 10 pairs FR junction box with mouldedplastic enclosure as per specification no. WG-TW
1.10 ELV Cabling Supplying and installing cat-6 cable with rodent proof and anti termite jacket suitable for networking as per specification No. WG-ELVC/NC
2.1 Indoor LED Fittings Supplying and erecting LED square / circular Max. 7W down lighter/ PanelLight having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W,CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
Supplying and erecting LED square / circular Max. 18 W downlighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. rippleof 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
Supplying and erecting bulk head LED fitting max. 10W with high transitivitydiffuser with system lumens output of min. 1100 lumens, min. efficacy of 110lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life classof 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVCBlock / wooden board with minimum 2 years warranty as per specification No. FG-IDF/LED.
Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCTupto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95,operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs.at L70B50, including driver, with end caps on provided PVC Block / woodenboard with minimum 2 years warranty as per specification No. FG-IDF/LED.
2.4 Outdoor Fittings SITC of integrated LED street light fitting 60W IP65 & IK08class having single piece pressure die-cast aluminium housing, having systemlumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70,CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuiltsurge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including drivercomplete with minimum 2 Years warranty as per specification No. FG-ODF/SL.
SITC of integrated decorative Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser,having system lumens output of Min.4500 Lumens, min. efficacy of 100lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 ,including driver complete with 2 Year warranty as per specification No FG-ODF/PT.
2.10 Fans Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected,complete.
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF
2.11 Accessories for Fans Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slabwith making the site as original.
Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paintand two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level ofthe slab.
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly paintedfor fan complete erected with PVC three core flexible cable 1 sq. mm copperPVC wire.
3.6 Inverter Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 2500 VA digital pure sine wave inverter with backup time of 0.5 hrs. basedon Insulated Gate Bipolar Transistor (IGBT) technology complete as perspecification no. AP-INV
Supplying and erecting 12 V/150Ah Tubular battery with battery terminal wire,duly charged complete with 36 months warranty complete
DISTRIBUTION BOARDS 5.3 LT - MCBs/ MCB Change Over Switch Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB
Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
5.5 LT - MCCBs Providing & erecting 4 Pole MCCB, 415V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line load bias in provided enclosure / panel as per specification no.SW-MCCB Note:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.
5.4 LT – MCBDBs Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TPMCBs total 8 ways/24 poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification no.SW-MCBDB.
upplying & erecting triple pole and neutral distribution board (TPNDB), SP/TPMCBs total 4 ways/12 Poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification no.SW-MCBDB.
Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCBof 8 ways/phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43Protection on provided iron/GI frame (horizontal busbar type) as per specification no.SW-MCBDB.
Supplying and erecting single pole and neutral distribution board (SPNDB),with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron /GI frame as per specification no. SW-SWR/MCBDB
5.6 RCCB / RCBO Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, withovercurrent, rated short-circuit breaking capacity (10 kA) and earth leakageprotection, with 30/100/300 mA sensitivity and short circuit and earth leakagetrip indication as per specification no SW-RCCB/RCBO
LT PANEL The LV switchboard shall be type tested assemblies, all type tests as defined in latest IEC 61439-1&2. Also it should comply IEC 61641 Internal arc withstand for 100 kA for 0.3 Sec. LT panels must be built up from compartment housing, circuit breakers, control-gear, relays, busbars, controls and other items of equipment as per BOQ. Low Voltage switchgear & control gear must comply IEC 60 947 /IS 13947.The Short circuit current with minimum duration of 1sec. for LV switchgear panels shall be as indicated in SLD. The LV Main Switchboard shall be identical in mechanical construction to the LV Switchboard which had been type-tested by an acceptable, multi-fold design with impact test IK07-IK10.The design temperature for the equipment provided in the main low voltage switchboards shall be +50°C. the switchboard shall be of form 4b, for form of separation only metallic compartmentalization shall be used, Hylem / PVC sheets shall not be allowed. Switch board panels and cubicles shall be fabricated with CRCA Sheet Steel of thickness not less than 2.0 mm. Busbars shall be made of high conductivity, and high strength Aluminum E91 grade Busbars shall be of rectangular cross sections , not more than 6mm thickness better suitable for full load current for phase bus bars and half/ full rated current for neutral bus bar or as stipulated in schedule of quantities. Busbar shall be suitable to withstand the stresses of fault level as specified in schedule of quantities. The material and the spacing of the Busbar supports should be same as per the type tested assembly. Busbar shall be tin plated with silver contacts.The cables and control wires shall be suitable for withstanding 105 deg C. Paint shall be RAL 7032 powder coated or as per the directives of engineer in charge. All panels must be designed, tested & manufactured as per IEC61439- 1 & 2 & IEC 61921 refrence standard. ( Panels shall be designed as per SLD attched )
LT DISTRIBUTION PANEL Providing & erecting 2No. 4 Pole MCCB 415V, 320A, rated short-circuit breakingcapacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting andadjustable magnetic setting with provided leads, provision for installation ofshunt/UV/trip alarm contact and MCCB should have phase barriers both sides,with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel. Supplying and erecting 1No. ON LOAD four pole automatic transfer switch, 415V,320A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6. Multifunction meter equivalent to conserv EM 6400 with RS-485 communication port. 6 Nos. phase indicating lamps backed upwith MCB ON/OFF/Trip indicating lamp on incomer feeder for indicating the status of feeder. Protective devices The Transformer incoming ACB shall be provided with the following protective devices. Combined Under voltage and over voltage relay ,3 Phase with Time delay setting. Separate CT's shall be provided for protective system and measuring system. 2 no. of CT on Yellow phase for Automatic power factor correction relay on the incoming breaker. Bus Bar 400 Amp. TPN Aluminium Bus Bars of suitable length and of crossection not less than 1.2 sq. mm/ amp. Bus bars shall be insulated by heat shrinkable sleeves and clip on shrounds for joints. Bus Bar shall be designed to withstand a fault level of 50 KA at 415 Volts. All outgoing feeders shall be provided with one sets of ON/OFF lamps with protection MCCB, and Ammeter Providing & erecting 1No. 4 Pole MCCB 415V, 200A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magneticsetting with provided leads, provision for installation of shunt/UV/trip alarm contact.MCCB should have phase barriers both sides, with insulation withstand capacity 800V,no line-load bias in provided enclosure/panel as per specification no. SW-MCCB Providing & erecting 1No. 4 Pole MCCB 415V, 125A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magneticsetting with provided leads, provision for installation of shunt/UV/trip alarm contact.MCCB should have phase barriers both sides, with insulation withstand capacity 800V,no line-load bias in provided enclosure/panel as per specification no. SW-MCCB Providing & erecting 1No. 4 Pole MCCB 415V, 100A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magneticsetting with provided leads, provision for installation of shunt/UV/trip alarm contact.MCCB should have phase barriers both sides, with insulation withstand capacity 800V,no line-load bias in provided enclosure/panel as per specification no. SW-MCCB Supplying, erecting & marking 13No. FPMCB 63A, with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking 4No. FPMCB 40A, with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking 3No. DP MCB 32A, with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking 2No. DP MCB 16A, with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
7.1 LT Cables (Aluminium) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL
7.2 LT Cables (Copper) Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (round) cable 1100 V, 3 core 4 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (round) cable 1100 V, 3 core 6 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (round) cable 1100 V, 3 core 10 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU
7.6 Cable Enclosures Supplying & laying (including excavation) reinforced cement concrete pipe of IS458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slopeincluding providing and fixing collars in cement mortar 1:2 and curing etc.complete.
7.11 Cable Tray Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.
Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.
Hot Dipped Galvanized Octagonal Poles Providing & erecting 4 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT
EARTHING (EA) Supplying, installation and testing of maintenance free earthing comprising ofElectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon basedenvironment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the resultsSpecification no. EA-MF
ACCESSORIES Supplying and erecting copper strip of high purity required size used for earthingon wall and/or any other purpose with necessary copper clamps fixed on wallpainted with bituminous paint with joints required. As per specification no. EA-EP.
Supplying and erecting GI strip of high purity required size used for earthing onwall and/or any other purpose with necessary GI clamps fixed on wall paintedwith bituminous paint with joints required. As per specification no EA-EP.
Supplying and erecting GI wire of high purity of required sizes used for earthingor any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete.
LIGHTNING CONDUCTOR AND ACCESSORIES Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.
11.1 Generators Supplying, erecting, testing and commissioning of diesel generating set with alternator of 200 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 42.30 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75dB at 1.0 m, provided with first filling of oil, diesel not less than 425 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
LIFTS WORK SITC of Electric Traction Passenger Lift with Rated capacity :- 14 Passenger/952Kg· Floors :- G+7 floor (8Stops/8 Landings)· Travel :- 21 to 29.4 mtrs· Location of Lift Machine:- MR· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 900 mm wide x 2000mm· Clear Car size of ......mm wide x ......mm deep x 2250mm high· Lift shaft available having clear size of ......mm wide x ......mmdeep, ......mm Pit depth, ………mm Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304grade solid(non-claded) sheet of 1.5mm thick in hairline finish for car andall landing doors with SS door architraves/frames. The lift doors shallhave minimum 1 hour fire rating (with submission of necessary valid TestCertificate issued by NABL accredited or Independent Test laboratory)· Lift car enclosure made from SS 304 grade solid(non-claded) sheet of1.5mm, thick with hairline finish with frame made from MS girders,bracing of adequate size with minimum safety factor of 5, with ToeGuard Apron, with necessary false ceiling with LED lights having lightintensity of at least 100 lux in car, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The liftcar interior design shall be done as per the directions of engineer incharge.· COP with SS face plate having metallic push buttons with BrailleCode & luminous indicator around button with FPI, scrolling UP/DNLED indicator & with / without attendant key switch, OWD with audiovisualalarm, VAS in Marathi, Hindi & English with intercom system withtelephone instrument in Lift car, LMR & FCC/ground floor· LOP with SS face plate having recess/surface push button box for alllandings with scrolling UP/DN LED indicator having metallic pushbuttons with Braille Code & luminous indicator around button with CPI,Lift car arrival & next travel direction audio-visual indication at alllandings
SITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex Lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication/control/data cabling laying in rigid PVC conduits/trunking etc. complete
CCTV WORK Supplying & erecting of High definition 2 Megapixel IP IR Dome Camerawith following featuresImage Sensor : minimum 1/2.8" Progressive Scan CMOS,Video Resolution : minimum 1920 x 1080Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream,Frame rate : minimum 25 fps at all resolutions,WDR : minimum 120 dB Wide Dynamic Range,ONVIF profile conformant,minimum IR distance : 30m,Lens Type : 2.8/4/6 mm Lens, fixed focal,Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 30m.Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°.Power Supply : Support 12VDC & PoE,IP67, IK10 - Vandal Resistant.Built in micro SD/SDHC/SDXC card slot of minimum 128 GB,Built in microphone.minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out× 1.Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance.Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection.Operating temperature ( -30 to 60° C ) .Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled.Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol.RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM.
Supplying, installing, testing & commissioning of 32/40 Ch. Network VideoRecorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 MegapixelResolution, with HDMI/VGA outputs, provided HDMI output of 4Kresolution or VGA output with output up to 1920 × 1080.Support H.265 or higher, H.264, MJPEG,Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANRTechnology,4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB,minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptiveEthernet interface,ONVIF conformance,Multiple network monitoring: Web viewer .support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,iSCSI, UPnP™, HTTPS.RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging andprogramming etc. complete as per specification no. CCTV-NVR
Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Portof NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64,Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected inposition in provided NVR as per specification no. CCTV-HDD
Supplying & erecting 55" professional LED display with 1920 *1080 ( FullHD) Display, suitable for 32/64 channel NVR and following featuresBrightness: minimum 500 Cd/m2Contrast Ratio: minimum 1000:1Viewing angle: 178/178 deg.Response time: maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In,Built-in speakers maximum 10 W,Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle dulyerected on wall or table top with standard accessories like wall mount stand andwiring connections etc. complete as per specifications no. CCTV-MON
Supplying, fixing and configuring 1000 BASE-T to 1000 BASE-SX (SC)multimode media converter for transmission distance upto 550 m withLED indication complete as per specification no. WG-NAS/MMC
Supplying, installing and testing UTP connector (RJ-45) as per specification no. WG-NAS/UTPC.
Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE802.3 standards with min. 193W PoE capacity with 4GE SFP uplink inprovided rack as per specification no. WG-NWC/ENS
Supplying, fixing, and configuring 10G Base -SR (SFP+) MM transceivercompliant with IEEE 802.3 standards erected in provided rack complete.
Supplying, fixing, and configuring 1200 Mbps dual band wireless routerhaving 4 Nos. of 10/100/1000 LAN ports external with 4 nos. of externalantennas compliant with IEEE 802.3 standards erected on desktop/wallcomplete.
Supplying and fixing Cat 6, keystone jack RJ-45 information outlet compliantwith ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 (ethernet) as per specificationno. WG-NAS/KJ
Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliantwith ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specificationno. WG-NAS/PP
Supplying and fixing multimode pigtails with SC/SC type splicing for (OM4)complete.
Supplying and erecting LSZH armoured multimode optical fiber cable with 12fibers, core dia 50/125 μm (OM4), suitable upto 10 GBPS, compliant to IEC60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench asper specification no. WG-ELVC/OFC
Supplying and installing FR PVC sheathed HDPE insulated copper cat-6Acable suitable for networking compliant with ANSI/TIA-568.2-D standards inprovided conduit/casing-n-capping as per specification no. WG-ELVC/NC
Supplying, installing, testing & commissioning analogue type EPABX of 3 x 8extension complete with CLI and voice DISA (Direct inward station access)expandable upto 32 extension as per specification no. WG-TA.
Supplying & erecting rosette box RJ type bakelite box on wall with LED indication duly connected as per specification no. WG-TA
Supplying, erecting & terminating 20 m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19pinHDMI connectors complete.
Supplying, erecting & terminating co-axial copper cable low voltage grade trishieldedRG-6 as per specification no. WG-TW
Supplying, erecting & terminating HDMI Extender Over RJ45 EthernetCable Cat 6, 60m/200ft complete
FIRE ALARM Supplying, installing, testing and commissioning of micro processor basedintelligent addressable main fire alarm panel, central processing unit with the1 loop capacity and capable of supporting not less than 250 devices and detectorsper loop, with on-board LCD alphanumeric backlit display suitable for minimum80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of aminimum 24 hours in normal condition and 30 minutes in alarm condition, Thepanel shall have suitable provision for network connectivity & compatible forthird party integration(Open Protocol to communicate) via aMODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008,NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacementwarranty and inclusive of lifetime software license validity, as per specification noFF-AFAS/CP.
Supplying, installing, testing and commissioning of AddressableMultisensor/Multicriteria Photo Thermal (Smoke + Heat) Detector. Thedetector shall have twin bi-colour LED for 360 deg viewing. The intelligent multicriteria detection device shall include the ability to combine the signal of thethermal sensor with the signal of the photoelectric signal in an effort to reacthastily in the event of a fire situation. It shall also include the inherent ability todistinguish between a fire condition and a false alarm condition by examining thecharacteristics of the thermal and smoke sensing chambers and comparing themto a database of actual fire and deceptive phenomena. This item is referred forNon-conditioning Area conforming to EN 54/VdS / UL & FM approved with 3years equipment replacement warranty, Designed to meet UL268, 7th Edition
Supplying, installing, testing and commissioning of addressable fire monitormodule for flow switches, Panic Bars & other Third Party Inputs. The monitormodule shall monitor potential free contacts. The device shall have an LEDwhich shall blink in normal state & get steady on activation to monitor the healthstatus of the device complete as required. Module shall conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays, EN 54/VdS / UL & FM approved with 3years equipment replacement warranty, as per specification no FF-AFAS/MM
Supplying, installing, testing and commissioning of addressable firecontrol/relay module for AHU, Access Control, Lifts, Staircase Pressurization,Fire Suppression & other Third Party Outputs etc., Module shall conforming toIS 5051 Part 2 (Sec 1 to 3) : 1982 reed relays / EN 54/VdS / UL & FM approvedwith 3 years equipment replacement warranty, as per specification no FFAFAS/CRM-FCM
Supplying, installing, testing and commissioning of addressable manual callpoints ( break glass type/pull station type), made of addressable break glassplastic square in shape surface/flush mounted with "Break Glass" massageembedded on the glass, complete erected with mounting base and requiredaccessories, Module shall conform to EN 54/VdS / UL & FM approved with 3years equipment replacement warranty, as per specification no FF-AFAS/MCP.
Supplying, installing, testing and commissioning of Addressable Sounder cumStrobe rated at minimum 75 dB @ 3m for Audible annunciation and minimum75cd flashing at 1 Hz for visual indication. Module shall conforming to IS 2189:2008, IS 15908:2021 / EN 54/VdS / UL & FM approved with 3 years equipmentreplacement warranty, as per specification no FF-AFAS/ S-ST
Supplying, installing, testing and commissioning of addressable fire isolatormodule for isolating short / dewired / loose circuits with automatic resettingarrangement. Isolator Base can also be proposed, however in that case needs tobe considered with each detector & module. The device shall have an LED whichshall blink in normal state & get steady on activation to monitor the health statusof the device. module complete as required. Module shall conforming to IS 5051Part 2 (Sec 1 to 3) : 1982, , EN 54/VdS / UL & FM approved with 3 yearsequipment replacement warranty, FF-AFAS/ISM
Supplying, installing, testing and commissioning FR, XLPE armoured cable2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceilingcomplete as per specification no. CB-LT/CU
Supplying, installing, testing and commissioning of repeater panel with suitablebattery backup of a minimum of 24 hours in normal condition and 30 min inalarm condition, minimum 10" LCD or LED display with resistive touch screenor function keys and automatic back-light dimming and the status of anyFire/Fault of Integrated Fire Alarm Panels or minimum 80 characters backlitalphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manualcontrol keys for silence/mute and to reset the FACP from the repeater station.Panel shall conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 /VdS/FM & UL with 3 years replacement warranty FF-AFAS/RP. (Compatiblewith 1/2 Loop Fire Alarm Control Panel), as per specification no FF-AFAS/RP
Supplying, installing, testing and commissioning 15W PA Column Speakerswith 15W RMS power in aluminium extruded cabinet, Moulded Plastci Covers &Metal mesh grill, frequency response 150-15,000Hz, operates on 100V line withpower taps of 15/10/5/2.5W in black or white color,With Mounting clamps &Necessary hardware, as per decesion by Engineer-in charge complete as perspecification no. PA-CS
Supplying Installing, testing and commissioning of PA Gooseneck Microphonewith Base and frequency response 50-16000Hz, 150Ω to 200Ω impedence,sensitivity 3 to 5.5mV/PA with minimum length(excluding pedestal) of585mm(23") long, felxible stem gooseneck condenser microphone & Heavy DutyMetal Base having on/off switch, LED indication and Suitable for 48V phantomsupply as per specification no. PA-GM
Supplying, erecting, testing and commissioning of multistrand annealed barecopper conductor, transparent PVC insulated 2C x 0.75 sqmm speaker wire inprovided trunking/conduit etc.complete as per specification no. PA-TSPWR
Supplying, erecting, testing and commissioning of 2 core 2.5 sqmm copperconductor shielded microphone cable complete as per specification no. PASMC
Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessoriesin wall/floor with chiselling appropriately as per specification no. WG-MA/CC.
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid