CERTAIN REPAIR TO DRAIN, PATH AND OTHER MISC WORKS IN OTM AREA UNDER AGE B/R I AT NAMS

Amount

M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks complete all as specified and directed.

All as per item 2 here in before but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brickwork /stone built in cement mortar etc all as directed.

All as per item 4 here in before but except brick.

M&L for PCC (1:3:6) type C-1 using 40 mm graded stone aggregate as in fdn/mass filling/drain sub base etc. incl demolition and rubbish off the primises all as specified and directed.

M & L for Flush pointing to brick walls in cement mortar 1:4 complete all as specified and directed.

Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs and similar articles with plain faces incl dimolition of old slab complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed

M&L for 200mm bore dia RCC Class NP 2 pipes laid and jointed with collar complete all as specified and directed.

Material & labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed of 200mm dia RCC pipes including forming cradels after they are laid and tested in all as specified and directed.

S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed.

All as per item 12 here in before but except paver block shall be reused after necessary cleaning and making good all as specified.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone incl rounded chamfered edge and set in CM 1:4 including demolition of old PCC kerb stone of any description complete all as specified and directed.

M & L for PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as Spd & directed .

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade B complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete, Type D2 1:4:8 (using 40 mm graded stone aggregate) including demolition of old cement concrete in any description complete all as spd and directed.

M&L for plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in haunching, coping , benching etc including demolition of old cement concrete in any description complete all as spd and directed.complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed. incl WPC @3% by weight of cement etc. Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. incl WPC @3% by weight of cement etc. Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as spd and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for two coat of weather proof exterior emulsion paint over one coat of alkali resistance primer incl preparation of new plasterd surface complete all as specified and directed. Note : Colour and make as approved by Engr-in-Charge

Supply & fix precast PCC square pole in repair of M-15 Grade of size 150 mm x 150 mm at bottom & 100 mm x 100 mm at top of 2.25 m height with square base of size 45cm x45cm x15cm and at top pentagonal shaped PCC jali cover all around on square base of size 200 mm x 200 mm x 7.5 mm made as per shape complete all as specified and directed.

S & F steel work in tubular trusses and tubular posts, vertical/horizontal bar, chin up bar and similar works including special shaped washers, chequered plate etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old mild steel of any description complete all as specified and directed.

All as per item 28 here in before but except mild steel.

S&F for Pre- painted galvaume aluminum zinc coating GI based manglore / trapezoidal / semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding, fixed with self tapping screws as incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC. Note- Design/Pattern/colour of roofing sheet sheet to decided and approved by EIC/GE.

M & L for 0.63mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F, in repair for providing precast conc. Jallies 35mm thick type B-O 1:2:4 using 12.5mm graded stone agg and set in cement mortar 1:4 complete all as spd and directed.

M&L, in repair for precast RCC pillar in 1:2:4 type B0 (using 12.5mm graded aggregate) decorative type of size (100mmx100mm & 750mm high for RCC jalli incl fixing in conc etc incl dismantling existing pillar complete all as spd and directed.

S&F 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality incl stainless steel studd (size of board , design of bd , type of print on sheet , size of studd not less than 35mm x 22mm dia, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL complete all as specified and directed incl dismantling of existing damaged / rusted sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70 kg per sqm. (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818) complete all as specified and directed.

Dismantling existing old vintage damaged and rusted / faded road sign boards complete all as directed .

S & F for HIP RATRO radium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge and of best quality as approved by GE), incl dismantling existing old vintage damaged standing sign board complete all as specified and directed. Note-Composite panel sheet, Stainless steel pipes will be measured and paid separately.

S&F for 3mm thick Aluminium Composite pannel sheet best quality complete all as spd and directed.

M&L for glow sign board frame / standing sign board made out of stainless steel tubular / flat / angle as in any size, dia and stainless steel of grade A-ISI 304(1818) complete all as spd and directed

S&F decorative stainless steel dome 65mm to 75mm dia complete all as spd and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 100 mtr making good in soft/ loose soil complete all as specified and directed.

M & L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for Granite 15-17mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edging incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

Jaspal Construction Co.

Chander Mohan Arora Contractor

tarvinder singh

M/s MAHAJAN CONSTRUCTION CO.

BISHAN DASS

tarlok singh contractor

M/s Vijay Construction Co.

M/S MAHAJAN CONSTRUCTION CO