Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | ₹2.5 L Quoted ₹3.0 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹3.2 L+₹17,348.25 (5.72%)Rejected-Finance | ₹3.2 L+₹17,348.25 (5.72%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.4 L+₹38,398.25 (12.7%)Rejected-Finance VILLAGE DOCHI P O DEVGARH TEHSIL KOTKHAI DISTT SHIMLA H P | KOTKHAI | SHIMLA | HIMACHAL PRADESH | ₹3.4 L+₹38,398.25 (12.7%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | rupinder justa govt contractor L2 | PRATYUSH JUSTA L1 | rakesh sharma govt. contractor L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and errection of monoblock submersible pumping set of reputed make such as KSB/CALAMA/SU/Johnston conforming to latest relevent BIS code.The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659-1970 latest suitable for clearwater having greased packed bearings & shaft with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications.The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti/Crompton make conforming to relevent BIS code latest with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand non vertical loads with mini-mum wear & tear.It should also be fitted with a device to take up expansion of water with the heating of motor.
Discharge (Q): 1.38 LPS.
Head: 103.33
Capacity of pump: 2 X 5.00 HP. = 10 HP. | 2 | Set. | 44,000 ₹88,000 | 41,000 ₹82,000 Lowest | 45,000 ₹90,000 |
| 2.00 | Supply and fixing of control panel & push button starter for mono submersible pump complete with shaft and angle iron, febricated dully painted and complete with internal wiring and comparising of air break starter mainswitch of suitable Amp., T.P. volte meter, ameter, phase indicating lamps water level guard and single phase preventor.including entire carriage of material upto all leads and lifts. | 1 | Set. | 22,000 ₹22,000 | 21,000 ₹21,000 Lowest | 25,000 ₹25,000 |
| 3.00 | Supply and fixing of 4 Sqmm submersible cable to submersible sets.including entire carriage of material upto all leads and lifts. | 100 | Rmt. | 600 ₹60,000 | 550 ₹55,000 Lowest | 600 ₹60,000 |
| 4.00 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. | 182.25 | Cum. | 320 ₹58,320 | 311 ₹56,679.75 Lowest | 400 ₹72,900 |
| 5.00Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately). | ||||||
| 5.01 | 40mm dia G.I Heavy class, wall thickness 4.00mm. | 850 | Rmt. | 85 ₹72,250 | 81 ₹68,850 Lowest | 85 ₹72,250 |
| 6.00Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to ERW after 100 mtr. pipe or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code i.e. IS 816-1969 with electrode as per IS: 814-1991 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect in all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. | ||||||
| 6.01 | 40 mm dia Flange Table 17. | 4 | Pair. | 1,000 ₹4,000 Lowest | 1,000 ₹4,000 Lowest | 1,200 ₹4,800 |
| 6.02 | 40 mm dia Flange Table 5. | 5 | Pair. | 1,500 ₹7,500 Lowest | 1,500 ₹7,500 Lowest | 1,600 ₹8,000 |
| 7.00Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately) | ||||||
Tender Value
₹3.4 L
EMD Value
₹6,800
Closing Date
30 Sept 2025, 11:00 amClosed
Executive Engineer
JSV Division Jubbal
RM of LWSS Pandli in GP Pandli Tehsil Kotkhai Distt Shimla HP SH Supply and errection of submersible pump of 5 HP Laying jointing and testing of R/main of GI pipes 40mm Heavy class 850 Rmt and 20mm dia 300 Rmt for distribution system of village Bag
2025_HPIPH_115125_6
JBL-SML-09-718
Open Tender
Civil Works
Item Rate
90 days
Kotkhai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹6,800
10 Jul 2026
18 Sept 2025
30 Sept 2025
18 Sept 2025
30 Sept 2025
18 Sept 2025
Amount
Supply and errection of monoblock submersible pumping set of reputed make such as KSB/CALAMA/SU/Johnston conforming to latest relevent BIS code.The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659-1970 latest suitable for clearwater having greased packed bearings & shaft with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications.The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti/Crompton make conforming to relevent BIS code latest with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand non vertical loads with mini-mum wear & tear.It should also be fitted with a device to take up expansion of water with the heating of motor. Discharge (Q): 1.38 LPS. Head: 103.33 Capacity of pump: 2 X 5.00 HP. = 10 HP.
Supply and fixing of control panel & push button starter for mono submersible pump complete with shaft and angle iron, febricated dully painted and complete with internal wiring and comparising of air break starter mainswitch of suitable Amp., T.P. volte meter, ameter, phase indicating lamps water level guard and single phase preventor.including entire carriage of material upto all leads and lifts.
Supply and fixing of 4 Sqmm submersible cable to submersible sets.including entire carriage of material upto all leads and lifts.
Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.
Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately).
40mm dia G.I Heavy class, wall thickness 4.00mm.
Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to ERW after 100 mtr. pipe or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code i.e. IS 816-1969 with electrode as per IS: 814-1991 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect in all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
40 mm dia Flange Table 17.
40 mm dia Flange Table 5.
Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately)
20 mm dia (LC)
Providing and fixing of copper alloy gate valve (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
20 mm dia (LC)
rupinder justa govt contractor (BID ID -562534)
rakesh sharma govt. contractor (BID ID -562572)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .