E.I. WORKS

Amount

S & F of Hylam Sheet of thickness 6 mm of size 24" x 30" to be fixed on angle iron on wall and 3 Nos. of 315 Amp. Kitkat type fuse to be fixed on the Hylam Sheet.

Supply & Installation of fabricated cubical type compartmentalized dust & vermin proof panel board of suitable size, made of 14 SWG. MS sheet reinforced with (40 mm.×40 mm.×6 mm.) flat / angle iron frame work with individual hinged door with locking arrangement for all compartment & providing suitable ventilation arrangement and painting with 1 (One) coat of R.O. primer & 2 (Two) coats of powder coated synthetic enamel paint by spray painting incl. interconnection with suitable size of copper wire / strip between B.B.C. to all main switches and other accessories incl. necessary glanding, socketing, etc. as required and earthing by G.I. wire with nuts & bolts in the body complete with base channel. The lower size of the base of panel board should rest on the frame work (75 mm. × 40 mm. × 5 mm.). The control panel will have suitable cable entry from bottom through cable gland plate to access sufficient no. of cables as per direction of E.I.C. The panel comprising with following switches

Outgoing: (i) S & F of 415 V,100 Amps.TPN main switch with 3 nos.DIN Type HRC fuse – 4 no.(L & T/Siemens make). (ii) S & F of 415 V, 63 Amps.TPN main switch with 3 nos.DIN Type HRC fuse – 2 no.(L & T/Siemens make). (iii) S & F of 415 V, 32 Amps.TPN main switch with 3 nos.DIN type HRC fuse – 2 no.(L & T/Siemens make).

S & F double door 6 Way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection for 100A FP MCCB as incomer and 6 Nos. 63A TP MCB as outgoing. on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make: Legrand / L & T).

Supplying and fixing 240V, 32A DP Main switch with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc .(Make- Havells / Standard)

Supplying and fixing 250 V, (2+6) way, SPN MCBDB with SS enclosure double-door with IP- 42/43 protection with 40 A DP Isolator as incomer and 6 nos. 6-32A SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make:LEGRAND/ L & T)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

i) Average run 8 mtr

Supply & Fixing 250 volt. 4 ft. long double LED Tube Light fittings incl. LED Tube of polycarbonate body complete with all accessories as per direction of EIC. (Make-Philips/ Crompton)

(i) Philips TMC 501P 2xT-LED 22W P3242 with 02 nos MAS LEDtube 1200mm 18W865 T8 I – 2100lm Crompton IGP 162 LT8-16 with 2 Nos. LT8-20-865 (2) LED Tubelight.

Fixing only twin LED Tube light fitting complete with tube lamp Directly on wall /ceiling with U shape metal clamp and suitable size M.S. fastener, Ceiling plate, nipples etc. as required.

Supply & Fixing of 1200 mm sweep 240 Volt, 50Hz AC ceiling fan complete with blades, canopy, fork, rubber bush etc. as per direction of EIC. (Make - Orient Electric Summer Breeze/ Crompton Aura)

Supply & delivery 30cm (12") 1420 r.p.m. sweep A.C. single phase heavy duty exhaust fan complete set ready to use x as per G.S. (E.P.C Electrical Pvt. Ltd- Heavy Duty.)

Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 30 cm Exhaust fan (12")

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of 30 cm (12") as per direction of EIC.

Supply & fixing 6 watt LED bulk head light fittings with all accessories & making necessary connection as per direction of EIC. (Make- Philips Endura LED- WT202W LED 6S CW PSU S2 PC / Crompton LB HP - 10 CDL)

S&F of A.C. superior type call bell on T.W. Board incl.S&F T.W. Board (Make-Anchor-8320)

S & F 9 watt LED lamp on angle holder for bracket point incl. making necy. Connection as to GS (Make: Crompton / Philips)

S & F 240V, 2 nos 6 A, 3 pin Modular type plug socket (Make-Legrand with separate 2 nos 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & F 240 V, 16 A, 3 pin Modular type plug socket (Make-Legrand ) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & F 240 V, 3 nos. 6 A,& 1 nos 16A 3 pin Modular type plug socket with 3 nos. 6A & 1 nos 16A Modular type switch (Make-Legrand ), without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

i) 2 x 1.5 Sq. mm. + 1 x 1.5 Sq. mm. ( For 2x5A & 1x5A)

ii) 2 x 2.5 Sq. mm. + 1 x 1.5 Sq. mm. (Computer, Power Point)

iii) 2 x 6 Sq. mm. + 1 x 4 Sq. mm. (for Main switch to SPNDB)

Finishing the end of the cable by crimping method as to G.S.

i) 2 x 2.5 Sq. mm. + 1 x 1.5 Sq. mm.

ii) 2 x 6 Sq. mm. + 1 x 4 Sq. mm.

Supplying and fixing 415 V 200A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Make: Legrand / L & T)

Supplying and fixing415 V 100A FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection ( Make: Legrand / L & T)

Supplying and fixing415 V 63A FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection ( Make: Legrand / L & T)

Supply and delivery of following 1.1 KV grade XLPE/PVC Alluminium armoured cables (Make-Polycab/RR Kabel/Havells / KEI) as per direction of EIC.

i) 2 core 10 sq. mm. ( Main panel to SPN.).

ii) 4 core35 sq. mm.

Laying of one No. 2 core 10 sqmm Cable in underground trench 460 mm wide x 760 mm average depth,through GI pipe protection , including filling the space and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl.removing the rubbish.

i) 2 core 10 sqmm at an average depth of 75 mm.

ii) 4 core35 sq. mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below as per GS.

i) 2 core 10 sq. mm

ii) 4 core 35 sq. mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as per GS.

i) 2 core 10 sq. mm

ii) 4 core 35 sq. mm

Straigh through Jointing of 4 core 35 sqmm cable by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe.

S & F earth busbar of 25 x 6 mm M.S. Flat on wall as to G.S.

Loop earthing by No. 8 SWG G.I. wire from busbar to equipments as to G.S.

S & F of 36 watt LED Street Light made up of pressure die cast housing with toughened glass and high power LED's with IP 65 protection (Make: Crompton LSTS - 36-CDL-M)

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) All materials, equipments & accessories must conform to relevant IS / IEC specifications.

KALPANA BHATTACHARJEE

M/S EASTERN ENGINEERING