T-01/OMC4/EMD2/DTPS/ANPARA

Part-A

Routine maintenace of HT/LT power cables & control cables

Floor cleaning of cable vaults/galleries

Daily upkeeping of all mechanical and Electrical part of Electric hoist

Operation of Electric Hoist

Routine/Breakdown maintenace of all exhaust fan and vetilation system at various places

Part-B

Salvaging of HT cables of following sizes above 70 sqr.mm.

1CX630 Sq.mm, XLPE, 11 KV

3CX185 Sq.mm, XLPE, 11 KV

1CX300 Sq.mm ,XLPE, 3.3 KV

1CX150 Sq.mm, XLPE, 3.3 KV

3CX185 Sq.mm, XLPE, 3.3KV

Laying of HT cables of following sizes above 70 sqr.mm.

1CX630 Sq.mm, XLPE, 11 KV

3CX185 Sq.mm, XLPE, 11 KV

1CX300 Sq.mm ,XLPE, 3.3 KV

1CX150 Sq.mm, XLPE, 3.3 KV

3CX185 Sq.mm, XLPE, 3.3KV

End Termination of HT cables of following sizes above 70 sqr.mm.

1CX630 Sq.mm, XLPE, 11 KV

3CX185 Sq.mm, XLPE, 11 KV

1CX300 Sq.mm ,XLPE, 3.3 KV

1CX150Sq.mm, XLPE, 3.3 KV

3CX185 Sq.mm, XLPE, 3.3KV

Straight through joint of HT cables of following sizes above 70 sqr.mm.

1CX630 Sq.mm, XLPE, 11 KV

3CX185 Sq.mm, XLPE, 11 KV

1CX300 Sq.mm ,XLPE, 3.3 KV

1CX150Sq.mm, XLPE, 3.3 KV

3CX185 Sq.mm, XLPE, 3.3KV

Repairing/Tapping of HT cable of cables of following sizes above 70 sqr.mm.

1CX630 Sq.mm, XLPE, 11 KV

3CX185 Sq.mm, XLPE, 11 KV

1CX300 Sq.mm ,XLPE, 3.3 KV

1CX150Sq.mm, XLPE, 3.3 KV

3CX185 Sq.mm, XLPE, 3.3KV

Opening of HT cable terminal box & disconnection of power cable (Rs. per Job)

Connection of HT Power cable and cleaning of Terminal Box (Rs. per Job)

Salvaging of LT cables of following sizes above 70 sqr.mm.

1CX 95 to 120 Sq.mm

1CX 400 to 630 Sq.mm

2CX 70 to 120 Sq.mm

3CX 95 to 240 Sq.mm

3.5CX 95 to 240 Sq.mm

Laying of LT cables of following sizes above 70 sqr.mm.

1CX 95 to 120 Sq.mm

1CX 400 to 630 Sq.mm

2CX 70 to 120 Sq.mm

3CX 95 to 240 Sq.mm

3.5CX 95 to 240 Sq.mm

End Termination of LT cables of following sizes above 70 sqr.mm.

1CX 95 to 120 Sq.mm

1CX 400 to 630 Sq.mm

2CX 70 to 120 Sq.mm

3CX 95 to 240 Sq.mm

3.5CX 95 to 240 Sq.mm

Straight through joint of LT cables of following sizes above 70 sqr.mm.

1CX 95 to 120 Sq.mm

1CX 400 to 630 Sq.mm

2CX 70 to 120 Sq.mm

3CX 95 to 240 Sq.mm

3.5CX 95 to 240 Sq.mm

Repairing/Tapping of LT cable of cables of following sizes above 70 sqr.mm.

1CX 95 to 120 Sq.mm

1CX 400 to 630 Sq.mm

2CX 70 to 120 Sq.mm

3CX 95 to 240 Sq.mm

3.5CX 95 to 240 Sq.mm

Miscellaneous works related with maintenance of cable racks, cable tray, risers, reducers, bends, elbows etc.

Replacement of deteriorated M.S. Trays of different Sizes.

Fabrication and fixing of cable rack& other M.S. structure.

Erection of junction boxes of different sizes.

Erection of riser, reducer, Elbow etc.

Erection after modification of various type of TPN switch/starter maximum up to 400 Amp.

Removal, re -fixing of tray covers in Boiler area.

Removal and re-fixing of chequer plates or grid on Boiler floor for attending cable fault on beneath the racks

Providing new tray cover at different locations&clamping there of as per size

Provide cable markers as danger board at every 10 meter to Avoid damage to under ground cables by grouting 2 Ft. long angle pieces wherever required.(as per scope of work)

Digging of earth for locating and attending the faulty portion of cable and refilling in the same manner after attending the fault.(as per scope of work)

Writing of nomenclature in size of 1-1/2 inch as and when required anywhere on the panel board.(as per scope of work)

Painting of trays/plates or other M.S. structure with red oxide primer with material.(as per scope of work)

Painting of trays/plates or other M.S. structure with synthetic enamel of reputed brands. Asian paints/Berger/Nerolac with material. (as per scope of work)

Cutting & disposal of grass, wild plants, shrubs, etc. as per scope of work for approx. 60,000 Sq.mtr.

Clearing jungle, including uprooting of rank vegetation, grass, bush wood, trees and saplings of girth up to 30 Cm measured at a height of 1 M above ground level and removal of rubbish up to a distance of 50M out side the periphery of the area cleared.

Alignment and Surface preparation of mono rail of Electric Hoist.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Breakdown maintenance / servicing of traverse Motor Gearbox Assy.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Breakdown maintenance / servicing of Rotary Motor Gearbox Assy.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Servicing of Hooks, Rope Pulley, Break shoe of Electric Hoist.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Rectification / Replacement of wire rope of Electric Hoist.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Smoothening of swirling/ Twisted rope of Electric Hoist.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Attending fault after Lowering& Lifting the hoist of Electric Hoist.

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Replacement / Repairing of rope rails/ DSL and its proper alignment work.

Laying of flexible cable

Shifting of LT motor from site to repair shop/ place of work/ site store or vice versa

40 Ton ID Fan

17.5 Ton FD & PA Fan

10 Ton to 15 Ton Bowl Mill

1 Ton to 8 Ton

Attending electrical breakdown

Breakdown Maintenance of Ventilation system

Replacement of starter of ventilation fan of different capacity

Replacement of Bearings in motor of ventilation fan of different capacity

Assembling and commissioning of ventilation fan of different capacity

Dismantling/Assembling of motors of ventilation fan located at different places