CCCF

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :

1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

1.00mm thick with zinc coating not less than 275gm/m²

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

SITC of Antyesthi Yantra with following specification : - 1.(A) Body MS. Sheet size 3mm &2 mm angle structure 50x50x5mm MS (B) Lining fire brick alumina 30% with ceramics board thickness 50 mm capacity 1260 C (C) White heat castable (k) & accost (50) for fire bricks feting (D) Angle 65x65x10 & 35x5 SS 304 grade (E) Road 30 mm 370 mm SS 304 Grade (F) Pipe OD 40 mm thickness 5 mm SS 304 grade (G) Ceramics blanket (64D) total bolts & nut MS & SS (H) Thermostat size 20 mm OD x 450 mm length (I) Control panel auto and manual both with change over /2-way swtch (J) Blower complete with fan size 305 mm with 1 HP Motor Nos 2 (K) Chimni length 3-meter size 350x350 mm tapper sheet thickness 3 mm With ceramic board lining (L) Ceramics board fitting 50 mm and 25 mm (M) Both side MS door with lock size -600x550 mm thickness 5 mm MS 50 mm ceramic board and ceramic blanket (N) Sliding Trolly alignment bed angle size 50x50 mm +35x35 mm+ strip, length 4.5 meter (O) Sliding Trolly cover 1750x1180x400 mm sheet size 3 mm with bearing roller (P) Sliding Asthiya & Ash collecting trey Size 2200x350x100mm sheet thickness 3mm with roller SS 304 grade (Q) Coated with heat resistance paint with capacity of 600-degree silver color (R) Two step fabricated checker plate and angle size 6'x2'x1' qty 2 including loading, unloading and Transportation ele.

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

SITC of Inverter with batteries with - O/P Voltage - 220 V , O/P Current 12 amp AC Nominal, I/P current 12 amp AC max , O/P power -2 KVA ,power factor-0.8, frequency- 50 Hz including 12 V 150 Ah Battery Rack and battery bank comprising SMF/VRLA batteries, inter-connection wiring etc. as required complete in all respect.