Providing Street Lighting and Area Lighting works for existing foundations at GCNEP Campus site in Kheri Jassaur at Bahadurgarh, Haryana

Amount

STREET LIGHT POLES : Manufacture, testing, supply, assembling, installation, and erection of Octagonal pole internally & externally hot dipped galvanised , fabricated out of 3mm thick sheet as per relevant I.S, complete with built in junction box, base plate size 200X 200 X 12 mm, as per detailed specifications. Junction box should be provided 500 mm above base plate with 4 Nos brass terminals on epoxy insulator,1 no. 6A SP MCB (D-curve) & 1 no. neutral link mounted on 4 mm thick bakelite sheet, gland plate etc. Base plate should have 4 nos holes suitable for mounting on RCC foundation 200 mm above FGL. Note: 1) Poles shall be mounted on already existing foundations 2) Placing levelling nuts and washers on foundation bolts will be in the scope of agency

7m pole with 1 no. 1.5m bracket fabricated out of galvanised pipe of 40 NB medium class.

4m pole with 1no. 1.2m bracket fabricated out of galvanised pipe of 40 NB medium class.

4m pole without bracket fabricated out of galvanised pipe of 40 NB medium class.

3m pole without bracket

LED luminaires for Street Lighting : Supply, Installation, testing & commissioning of following LED luminaires on existing poles, including internal wiring with 3 Core 2.5 sq.mm FRLS PVC insulated copper conductor with 3 Core 2.5 sq.mm FRLS PVC insulated copper conductor cable from terminal box at bottom of the pole to the luminaire, earthing of luminaire etc as per instructions of the EIC. Note: 1) The scope includes providing suitable GI nipple to mount the LED luminaires on existing poles. 2) Independent wiring to be done for each fixture from terminal box. 3) No negative tolerance is allowed on the min. system performance parameters indicated in SOQ & specifications.

Street light LED luminaries having a minimum efficacy of 110 lumen/watt and a minimum output of 7000 lumens, with 4000 to 5700 degree K CCT & pressure die cast Aluminium housing, UV stabilized polycarbonate / toughened glass diffuser having IP66 & IK07 protection etc. as per specifications

Street light LED luminaries having a minimum efficacy of 110 lumen/watt and a minimum output of 3500 lumens, with 4000 to 5700 degree K CCT & pressure die cast Aluminium housing, UV stabilized polycarbonate / toughened glass diffuser having IP66 & IK07 protection etc. as per specifications

All-in-one Solar street light fixture complete with 12V, LED luminaire with min. output of 3000 lumens (min. lumen efficacy of 100 lumen/W), IP 65, 4000 to 5700 degree K CCT, MPPT Solar charge controller, Solar PV Panel, inbuilt protection & suitable lithium-ion battery for min.18 hours autonomy with dimming.

Post top LED indirect lighting type luminaries having a minimum efficacy of 100 lumen/watt and a minimum output of 3500 lumens, with 4000 to 5700 degree K CCT, having IP65 & IK07 protection etc. as per specifications

Earthing of street light pole with 2 nos of 8 SWG G.I earth wires each 8 m long coiled in 1m dia at a depth of 1400 mm below ground level complete with soldering and connections with sockets etc all as per drawings specifications, and as per instruction of E.I.C

L.T Cables: Supply, installation, testing & commissioning of 1.1 KV grade aluminium/ Cu stranded circular/ sector shape core conductor with XLPE insulation, extruded PVC inner sheathed, G.I flat strip/wire armoured, extruded FRLS grade antirodent & anti termite PVC (ST-2)outer sheathed cable conforming to IS : 1554 Part I / IS 7098 Part-I with latest amendments, fixed on wall/existing HDPE pipe/ existing cable tray /existing hume pipe/trench/ shaft/pit/ on 5mm thick M.S. flat /GI spacer/angle/ support fixed with coach screws/grouted in wall/anchor fasteners 2mm. thick G.I. fabricated saddle, all fixing accessories, etc complete including painting of M.S spacers/angles and saddles as per enclosed detailed specifications, drawings & as per instructions of the E-I-C & of the following sizes: Note: HDPE pipe shall be measured seperately under item no. 5 and 6.

4C x 16 Sq.mm Al. conductor cable in existing HDPE pipe

LT Cables End Joints: End jointing of following sizes of cable by crimping with supply of all jointing materials like solderless tinned copper cable socket,double compression brass cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge.

4C x 16 Sq.mm Al. conductor cable

Supply & laying of 50/42 mm OD/ID self lubricated HDPE pipes in ground at depth of 600 mm including excavation in all types of soil including hard rock if any cutting of existing footpath,road etc, sand bedding,laying of warning tape on top,temporary reinstatement.back filling ,dewatering if necessary consolidation,disposal of excess earth with in the radius of 500 m etc. or fixed on wall/column/slab with 5mm thick M.S. flat /GI spacer/angle/ support fixed with coach screws/ grouted in wall/anchor fasteners 2mm thick G.I. fabricated saddle, all fixing accessories, etc complete including painting of M.S spacers/angles all as per the attached work specification and instructions of EIC. Note: 1) The scope of work includes HDPE pipe accessories such as couplers, cable end plugs, cable sealing plugs etc.

Laying of 50/42 mm OD/ID self lubricated HDPE pipes (provided by department to agency) in ground at depth of 600 mm including excavation in all types of soil including hard rock if any cutting of existing footpath,road etc, sand bedding,laying of warning tape on top,temporary reinstatement.back filling ,dewatering if necessary consolidation,disposal of excess earth with in the radius of 500 m etc. or fixed on wall/column/slab with 5mm thick M.S. flat /GI spacer/angle/ support fixed with coach screws/ grouted in wall/anchor fasteners 2mm thick G.I. fabricated saddle, all fixing accessories, etc complete including painting of M.S spacers/angles all as per the attached work specification and instructions of EIC. Note: 1) The scope of work includes HDPE pipe accessories such as couplers, cable end plugs, cable sealing plugs etc. (to be provided by agency wherever required). : 2) HDPE pipe will be provided by department to agency.: 3) Cost of transportation of HDPE pipe from department store (at site) to actual place of laying will be in the scope of agency.

Supply & installation of 250 mm dia heavy duty RCC Hume pipe of class 'NP2' to be laid in ground/from concrete cable trench to ground, for passing of cables with necessary joints, concrete supports. Scope includes escavation below ground level in all types of soil/concrete road cutting/foot path cutting, nallah cutting /any RCC wall/floor cutting including back filling, dewatering, consolidation, reinstatement of excess earth within the radius of 500 m and original,disposal making good to the original finish etc. spare space of hume pipes after cable laying and spares hume pipes shall be sealed properly with fireproof materials.

Kavery Electricals (BID ID -3139424)

Radha Electricals (BID ID -3139919)

RAJESH GAWDE (BID ID -3133509)