Repair and renovation of MS Kralpora

Amount

Demolishing Stone rubble masonry manually/by mechanical means incl.stacking of steel bars and disposal of unserviceablematerial within 50 metres lead in cement morter

Removing of mortar from the stones of above quantity

Earh work in excavation by manual means over areas ( exceeding 30 cm and up to 1.5 mtr in width and 1.5 mtr in depth as well as 10 sqm on plan ) incl. disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soils

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:4:8 ( 1 cement :4 fine sand :8 graded stone aggregate 20 mm nominal size ) Nallah.

Dry Random Rubble Masonary with hard stone in foundation and plinth Using Nallah stone with out bond stone

P L of 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size),

Brick work with common burnt clay F.P S ( non modualar) bricks of class designation 75 in foundation and plinth cement mortar 1:6 (1 cement :6 fine sand

Providing and fixing pressed steel door frames conforming to IS 4351, manufactured from commerical mild steel of 1.25 mm / 1.60mmthickness including hinges jamb, lock bead and if required angle threshold of mild steel angle of section 50 x 25 mm, or base tiles of 1.25 mm /1.60mm pressed mild steel welded or rigidly fixed together by Machanical means, including M.S pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock obsorbers as specified and applying a coat of approved steel primer after pre-treament of the surface as directed by Engineer--in -charge.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S . pressedButt hinges bright finishedof req size with necessary screws excluging panelling which will be paid for separately. all complete as per direction of Engineer In Charge.

12mm thick cement plaster in 1:4(cement:sand) Including all leads, lift and carriage complete

Centering and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases of columns, etc.

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15,landing, balconies, shelves, chajjas, lintels, bands plain window sills, stair cases and spiral stair cases upto floor five level excluding the cost of centring shuttering, finishing and reinforcement with 1:2.4 (1 cement:2 coarse sand :4 graded stone agg. 20 mm nominal )

Centring and shuttering including strutting propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

Structural steel work in built up sections trusses and framed work including cutting hoisting and fixing in position and applying of primer coat of approved steel primer .all complete ,welded

Providing corrugated G.S- Sheet roofing incl. vertical/curved surfaces fixed with polymer coated J or L hooks & nuts 8 mm dia with bitumen & G.I limpet wahser or with G.I limpet wahsers filled with white lead & incl a coat of approved steel primer & 2 coats of approved paint on over lapping of sheets complete ( upto any pitch ) in horizontal / curved surfaces excl. the cost of purlins, raften, & trusses and incl. cutting to size and shape whereever req. 0.63 mm thick with zinc coating not less than 275 gm/sqm.

Providing ridges or hips of width 60 cm over all width in plains G.S sheets fixed with polymer coated J or L hooks bolts & nuts 8 mm dia G.I lempet & bitumen washers complete. 0.63 mm thick with zinc coating not less than 275gm/sqm.

Providing and fixing plained eaves boarding Second class kail wood 250 x 32 mm (nominal size )

Providing and fixing hard boared ceiling sheet of approved quality with necessary nails etc. Comeplete 6 mm thick.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . Two or more coats on new work

Providing electrification including service line MCB,s etc complete .as directed by site engineer

Painting with silicon emulsion of approved brand and manufacture to give an even shade . two or more coats on new work

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars.

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. ) finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete.

P/fixing of sign board

KHURSHED AHMED