Krishnagiri District Shoolagiri Block under the Scheme MLACDS Veppanapalli 2024-25 Construction of Public Distribution Shop at Kalingavaram in Kalingavaram Panchayat Package No2024_25_SGI_80

Amount

1.Construction of Public Distribution Shop @ Kalingavaram H/O Kalingavaram.Estimate Amount: Rs. 12.00 lakhs

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Cement Concrete in 1 : 4 : 8 mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete

Brick work in cement Mortor 1:5 (One cement and five sand) using second class Bricks of size 23 x 11.5 x 7.5 cms for the following including mixing mortar and all other labour charges etc complete.

Supplying and errecting shuttering including necessary support for plane surface including all R.C.C Works etc., Complete.

For Column,Grade Beam

Lintels,Beam,Slabs

Sunshade

R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete

Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate. The binding wire shall be supplied by the Contractor.

Supply and fixing of cuddapah slab 38/40mm including all cost and labour charges etc., complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc.. complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

Plastering with CM 1:3, 10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Plastering with C. M 1:5 mix, 12 mm thick including cost and conveyance of all materials to site and labour charges etc complete.

Plastering with CM 1:4, 20mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISS HBG metal and the top rubed smooth etc., complete complying with standard specification as directed. i. 20mm thick for Resid

Distembering two coats using best approved Interiar oil destember with one coat primer over New plastered Surface including cost and conveyance of materials and labour charges etc complete

Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.Schedule ItemNo.359 – B) - 10.00 Sqm.

Painting two coats over new iron work using synthetic enamal paint including cost and conveyance of all materials to site etc complete

Towards the supply of steel Doors and Windows

Door 1 - 0.75 X 180 m

Window- 1.20x1.30 m

Window- 0.90x 1.20m

Ventilator- 0.90x 0.45m

Jolly- 0.45X 0.30m

Supplying and errecting pull and push type rolling shutter with ISI make of approved size and section using 18GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers , transportation charges etc., Gear operatied type (from 8sqm to 12sqm area)

Supplying and fixing in position white glazed EWC of best quality and approved make with 100mm "P" or "S" traps with double flapped right P.V.C seat cover with C.p brass hinges with 10.0litres PVC low level flushing tank with all internal fittings etc., a

Provsion for Photo charges

Provsion for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Thirumalesh Contractor (BID ID -1170370)