Aluminium glazed partition Enclosure for ION Nitriding Area inside Heat Treatment Shop and Outsourcing Department at LCA Tejas Division Plant II including Electrical Works.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. Concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived form natural sources : 4 graded stone aggregate 20 mm nominal size derived form natural sources) as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper (Single rubber stopper), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Supplying, fabricating and fixing Structural steel work riveted, bolted or welded and anchoring in built up sections using IS sections, bolts, plates, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of synthetic enamel paint all complete including required scaffoldings, as directed by EIC

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick.

(minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.

Demolishing cement concrete of any description and any thickness, manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Supplying, fabricating and fixing powder coated aluminium (Min. thickness of powder coating 50 microns) work for partitions, doors and ventilators, with extruded built up standard tubular sections / appropriate Z or other sections of approved make conforming to designation 63400 of IS 1285 and IS 733 including fasteners, EPDM rubber / neoprene gasket, snap beading for glazing / panelling, clips, cleat angle, C.P. brass / stainless steel screws etc., all complete as directed by the Engineer-in-Charge. Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .

Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .

Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm), in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. Note: Beadings / glazing clips shall be measured in aluminium items for payment.

Supplying and fixing 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator).

Supplying and fixing 5A to 32 A rating, 240/415 V,10kA, "c"curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commisioining etc. as required.

Supplying and fixing 5A to 32 A rating, 240/415 V,10kA, "c"curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commisioining etc. as required.

Supply and fixing of 6 module modular GI box (200MM X 75MM) alongwith modular base and cover plate for modular switches in recess as required.

Supplying and fixing of Modular switch 15/16 amps on the existing modular plate and switch box including connections but excluding modular plate etc as required.

Supplying and fixing of Modular socket outlet 6pin 15/16 amps on the existing modular plate and switch box including connections but excluding modular plate etc as required.

Wiring for circuit/submain wiring alongwith earth wire with the 2x2.5sqmm+1x2.5sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Wiring for power plug with 2x4 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1No 4sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

wiring for group controlled (looped) light point/fan point/exhaust fan point/call bell point (without indipendent switch etc.) with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Supply, fixing, testing and commissioning of 36Watts decorative type approved make 2'x2' luminaire LED panel Light fixture with LEDs recess mounted powder coated CRCA housing saemless front frame suitable for fixing to false ceiling including required necessary inter connections, supply of lamps, etc., in flush with false ceiling all complete as directed by EIC.

Supply and laying of 3 core 6sqmm armoured PVC insulated multi strand copper cable1100V grade in the PVC conduit, Complete as directed by EIC.

Supplying & providing indoor cable end joints for 3core 6sq mm armoured PVC insulated multi strand copper cable of 1100V grade by employing necessary glands and end terminals etc., complete in all respects as directed by EIC.

Total (Exclusive of GST)

Percentage above or below for total value on Sl.No. 23

Total amount after Percentage Sl.No. 23 + Sl.No. 24

GST @ 18% for total value on Sl.No. 25

Total amount (Inclusive of GST) Sl.No. 25 + Sl.No. 26

Preamble: 1. The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. 2. L1 (lowest quote) will be determined based on the total quoted amount including GST. 3. This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any. 4. Please refer Tender document carefully and understand full scope of work, Terms and conditons, if required visit the site and then submit your quote as no clarification will be entertained later on account of ignorance of the work/site.

Pre-Qualification Profile (To be Uploaded along with Part - A)

Contract Number:

Name of the individual/ Firm/ Company:

Estimation Amount In Rs:

Tender Notice Date:

GST ID No. For HAL

Name of the individual/ Firm/ Company: *Mandatory

Type of ownership

If Other, please specify

Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration

Address for Correspondence

Contact Details

Contact Person Name

Designation

Mobile no

Ph. No with STD Code

FAX. No with STD Code

Email Id

Registered Contractor

If Registered Contractor with HAL YES/NO

Registration No

Category

PEMD amount (if paid)

I.T Returns for past 03 Years (Assessment Years)

Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]

ESI & PF Nos. with proof

ESI Registration No. with proof [Mandatory]

PF Registration No. with proof [Mandatory]

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code No.

Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .

Name of the Bank & Branch

Date of issue

Value in Rs.

Solvency Value is as per NIT

Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.

Completed similar works during last 7 years

Work No I

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of work:

Work No II

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Work No III

Brief Description of Work:

Completed value of work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Details of person holding the Power of Attorney ( if different from the contact person)

Designation

Mobile no

Ph. No with STD Code

FAX. No with STD Code

Email Id

Documents Need to Uploaded

IT Return, Profit & loss and Balance Statement for the Financial Year duly mentioned above certified by the Chartered Accountant.

DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions Including price bid do here by accept all the terms and conditions laid doen In the said Tender document and will abide by the same on acceptance and ward of work.

DECLARATION II

I/We declare and confirm that - 1. All Information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false Information provided herein will result In the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I/We aware that document sought only be uploaded for evaluation of offer.