Restoration, maintenance and upkeep of electro-mechanical equipments and other machinery for electro-mechanical repairs and replacement/maintenance work to Water Tanker bearing No. 5816 (FOR FULL REFER TO NIT)

Amount

Mechanical transportation of the vehicle (water tanker) by engaging crane or other suitable mechanical means from Stores of WWD to workshop and operation & testing after carrying out necessary repairs at workshop and then shifting the vehicle back to Divisional yard.

General overhauling of the engine including top overhauling. Job Includes Lifting of Engine Block from the vehicle it’s lowering to work surface for repairs, machining of the engine head, p/f of piston rings, tappet springs, head gasket, job includes assembling the engine head, checking of nozzles. Providing and fitting of parts which includes piston set with ring set, valve set, valve guide set, connecting rod bush sets, Gudgeon pin set, bearing set, big end bearing set, sleeve set, head gasket, packing set and required machining job, temperature plug, belts, job includes filling of fresh M oil, P/f of M Oil filter, water separator, Air filter set, Fuel filter incl. cleaning of all components with diesel and other allied works. lifting & mounting of engine back to engine enclosure, assembling of parts complete and testing on full load skilled labour charges and allied works incl. cleaning of diesel tank.

P/F of Clutch Plate assembly, job includes dismantling of assembly, p/f of clutch plate, pressure plate, flywheel ring, clutch cable, paddle spring, bearing, oil seal, machining of face plate and allied works. The item used shall be as per OEM (TATA). The details/spec. will be provided by engineer in charge.

Repairing of Gear box system, job includes lowering and dismantling of GB system, replacement of damaged gear, synchronizer ring, bearing, oil seal set, gear cable, gear packing, seam set, gear lever kit, gear end, housing bolt, bonding tube, G oil (includes filling of G oil complete) and allied works. The items used shall be of OEM spec.

Repairing of Differential and Propeller system, job includes lowering and dismantling of D&P system, p/f of bearing, spider lock, stud, washer set, oil seal, D oil (includes filling of D oil), p/f of U-J cross, central bearing, shaft bolts (with nuts and washer), complete greasing and allied works. The items used shall be of OEM spec. The details/spec. will be provided by engineer in charge.

Repairing of Suspension system, job includes p/f of F/W King Pin sets with Bush, Bearing, Cotters and Shim, Lock, Rubber, O ring, tie rod end set, central bolt, etc., p/f of f/r leaf springs, support arm, LS pin, bush, washer, clip bolt, U- bolt, shock absorber, re-tensioning of all leaf springs including wheel alignment and balancing and allied works. The items used shall be of OEM spec. The details/spec. will be provided by engineer in charge.

Repairing of FI pump system. The job includes complete overhauling/calibration of FI Pump with P/F/R of required parts i.e., Nozzles, Vane Pump, TD Piston, DP Head, Oil Seal, Cross Disc, etc. The items used shall be of OEM spec. The details/spec. will be provided by engineer in charge.

Repairng of Steering system, job includes lowering and dismantling of SS, p/f of steering bush, repair kit, bearing, pitman arm, tie rod end kit, steering bolt, steering oil (power, wax pol, mak or equi.) repairs by way of welding and other allied works. The details/spec. will be provided by engineer in charge.

Repairing of Turbo System incl. core assy., charger kit, hose, etc incl. cleaning. The items used shall be of OEM spec. The details/spec. will be provided by engineer in charge.

P/F of new Self starter assembly, job includes dismantling of damaged starter and other allied works. The items used shall be of OEM spec. The details/spec. will be provided by engineer in charge.

P/I of 12V Battery (150AH Exide make) with 42 month warranty along with thimbles/connector, cables and other accessories. The job incl. crimping joints with Cr. tool and testing the battery on load.

Repairing of Alternator assembly, job includes p/f carbon brush set, field coil set, cut out, commutator switch set, oil seal, bearing, and other allied works.

Repairing of Radiator assembly, job includes, p/f of hose pipe sets with clamps, foundation bolt, belt and other allied works. Servicing of Radiator with chemical solution, p/f of Coolant, Repairs/soldering & welding to fin and radiator tanks and other allied works

Repairing of Electrical system, job includes p/f of Head Light Assy. (02 no.), Tail light assy. (02 no.), roof light, fog lights, odometer & speedometer, speedo sensor, cable, Indicator (with sound) assy. (02 no.), New Double Horn assy., Wiper blade assy. (Set of two), Replacement of fuses, ignition switch with keys, old/damaged wiring, P/F of GPS tracker and other allied works. The details/spec. will be provided by engineer in charge.

Repairing of Brake and wheel System, job includes Dismantling /fitting of brake & wheel system, P/F of dual brake valve Assy. (Booster), pressure control valve kit, drain valves, Air pressure pipe, brake pipe, inner/ outer wheel oil seal, inner/ outer wheel bearing, P/A of Grease in wheel hubs, bearings, P/F of brake oil and other allied works. The details/spec. will be provided by engineer in charge.

P/F of Window Glasses and Front wind shield, job includes door glass, bonding tube, Rubber for Glass Fitting, Side mirror assy. (Set of 2), Cabin rear view mirror and other allied works. The details/spec. will be provided by engineer in charge.

Denting/painting, job includes Denting/Painting of cabin (outside)/tank & painting at denting sites (recommended color). Scratching/Removing old Paint with the help of chemical treatment then applying putty wherever required, two coats red oxide and then applying two coats of paint job includes welding, grinding/finishing of surface, incl., Denting by hammer beating /heat treatment as required and repairing of front/rear Bumper, mud guard, Repairs to tank body, p/f of door locks with keys, latch, window regulator machine and other allied works. The details/spec. will be provided by engineer in charge.

Replacement of radial tyres of size 8.25xR20 (Apollo Endur./ Bridgestone/MRF /Eq.)

Providing of open D-end spanner (6-32) with cover and stripping tool/cable cutter, P/F cu-thimbles (02) (Taparia, Stanley, Goodyear).

Providing of combination plier joint cutter and screw driver set cum tester (Taparia /Stanley).

P/F of insulating cover of standard quality material for radiator and engine (4'x1.6') /as per the requirement. The job incl. spring wire, nuts & bolts/screws and other accessories.

P/F of 6.0m long conduit pipe (65 mm) of reputed make, 65mm ball valve (Sant/ Zoloto/eqv.) with reducer, elbow, socket, bend and allied works.

M/S MEHRAJ AUTOMOBILES (BID ID -2266883)

M/S DIAMOND AUTOMOBILES (BID ID -2258789)

M/S ADIL ENTERPRISES (BID ID -2265746)