"Engineering, Procurement & Construction (EPC) Tender for Civil Engineering Works, Electrification Works and Signaling & Telecommunication Works of New Single Broad Gauge Line of Ikauna (Including) (Chainage 173+400)-Bahraich (Including) (Chainage240+909) Section (Length:67.509 Km) in connection with Khalilabad-Bahraich New Broad Gauge Railway Line Project of North Eastern Railway".

G1A-Bridge Foundation and Substructure Works - (Group A) 353957897.87 Below/P

G1B-Utility Shifting works (Group-A) 7191873.43 Below/P

Supply &erection,of 12 Mtr Long hot deep galvanized and swaged type steel Tubular pole comprising bottom 5.8 mtr, middle,3.1 mtr& top 3.1 mtr. Approx weight 313kg.(Designation 1 410SP-65)IS: 2713 Pt.-1 to 3/1980.(Latest version) in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size) foundation,including excavation & refilling. dressing up of the plinth etc.in all respect as required.(For11/ 33 KV track crossing )(4 nos at each crossing)

Supply and erection of 150 mm dia B class GI Pipe conforming to IS:1239, for cable protection along pole/wall/road/rail line crossing, including all fastener ,complete in all respect.(for HT)(12 mtr at each crossing)

Supply of double walled corrugated(DWC)pipes for under ground power protection 3 along with the socket /coupler and T joint with "IP 67" protection for coupling where ever required . The HDPE pipe shall be rodent proof and fire resistent and size of outer dia 200 mm/ inner dia 175 mm in the length of 6 meters as per RDSOspecification RDSO/SPN/204/2011 ver 1.1amndt 1 or latest. (80 mtr at each crossing)

All work pertaining to horizontal directional drilling(HDD/Boring) and trenchless laying 4 of cable in boring under the track/road by using different sizes of pipe .The depth of horizontal boring of appropriate size(up to 200 mm) should be minimum 1.65 Mtr from rail flange/road level or required as per site.(20 mtr approx.at each crossing)

Excavation of cable trench of 1.6 Mtr depth and 1.0 Mtr wide (for 2 pipe laying) in all 5 kinds of soil with in station limit & block section both for main & tail cables as per cable route chart to be given by engineer-at-site and it's refilling with the same excavated soft soil. Note:-depth of the cable duct to be measured from the hard soil level of the ground. (30 m each crossing including loop)

Laying of 11/33 KV XLPE cable XLPE upto 300 mm sq. in G.I.Pipe 150 dia and in HDPE pipe (Fixing of G.I.Pipe will be covered item No ) &claimping of the cable along the pole /with angle/horizental bracing atleast 2 placed complete in all respect.(160 M on pole+440 in HDPE pipe including loop)

Supplying and commissioning of outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for185- 240 mm sq 3 core, XLPE aluminium conductor cable of 11 KV grade as required. (4 nos at each crossing)

Supplying and commissioning of outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 240-300 mm sq 3 core, XLPE aluminium conductor cable of 33 KV grade as required.(4 nos at each crossing)

Supplying and commissioning of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for185- 240 mm sq 3 core, XLPE aluminium conductor cable of 11 KV grade as required at site.

Supplying and commissioning of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for 240-300 mm sq 3 core, XLPE aluminium conductor cable of 33 KV grade as required at site.

Supply, fabricating & fixing of top rolled steel channel of size 100mmx50mmx6mm thick with MS clamps of MS flat of size 50x6 mm bolts & nuts of suitable size. (11KV )

Supply, fabricating & erection of top rolled steel channel of size 125 mmx65mmx6mm thick with MS clamps of MS flat of size 50x6 mm bolts & nuts of suitable size .(for 33 KV Line)

Supply & fabricating 50 mm x 50 mm x 6 mm size angle iron for bracings of 'H' pole/4 pole, including 50x6 mm MS clamps & erecting it on existing/new pole complete in all respect.

Supply & erecting 11KV clevies& tongue type strain insulator set(Disc insulator) on 14 pole comprising of cross arm straps &clevies type disc insulator 16mm dia cotter pin strain type strain clamps 16mm dia 170mm long bolts with nuts,springwashers,split pin 5mm dia plain washers etc. The strain insulator set should be as per Sketch No. DY.CEE/Con/BG/GKP/ STD/1/ 0492. (6 nos at each crossing)

Supply & erection of 11KV pin insulator set with MS bolts & nuts on pole complete in all respect.(6 nos at each crossing)

Supply & erection of 33 KV pin insulator complete with large steel head G.I pinnuts,washers etc complete in all respect.(6 nos at each crossing)

Supply & erecting 33KV Ball & socket type strain insulator set with 4 disc ( 1 Set of 4 17 Nos Disc insulators) on pole comprising of cross arm, strains &clevies type disc insulator 16mm dia cotter pin strain type strain clamps 16mm dia 170mm long bolts with nuts,springwashers,split pin 5mm dia plain washers etc. The strain insulator set should be as per Sketch

Supply of paint and painting(double coat paint & primer ) (AS per IS: 5613) of existing/proposed pole structure upto full length as per drg. (4 nos at each crossing)enclosed.

Supply & fixing of 11 KV& 33 KV Danger board 250x 300x 3mm thick G.I.sheet duly inscripted& painted & mounting/fixing on pole complete in all respect as per sketch attached .

Re-sagging of adjacent 11/33KV over headmians (Spans) on pole fittings etc. complete in all respect.(2 nos at each crossing)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and 21 providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required and connection with 40mm x 4 mm GI strip/flat instead of GI wire.(4 nos for HT ) crossing.

Supply of barbed wire & making anti-climbing device on horizontal & diagonal MS angle iron bracings on pole etc. upto suitable height on pole for safety complete in all respect.

Supply and drawing of Alumn. Conductor galvanised steel wire (DOG) on pole including its bending etc. complete in all respect. ACSR conductor will be supplied by contractor)( for 33KV OH line)

Supply and drawing of Alumn. Conductor galvanised steel wire (Rabbit) on pole including its bending etc. complete in all respect. ACSR conductor will be supplied by contractor) (for 11 KV OH line)

Supply,fixing& grouting of cable route marker on stone as per Attached Drg,. No. DY.CEE/W/LJN/2011/01 complete in all respect. (4 nos at each crossing)

Supply and erecting of stay set arrangement (Complete galvanised) 19/20 mm 26 diax1.8M.long stay rod, anchor plate of size 45 cmx45cmx7.5mm thimble stay clamps, turn buckle 20mmx60cm/7/3.15 mm dia G.I stay wire and strain insulator etc. in cement concrete 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation, including, excavation etc. complete in all respect.(HT) (8 nos at each crossing)

Supply & fixing of alumn. Socket terminal for alumn. XLPE cable size 240/300 mm sq.3 core cable complete in all respect.

Dismantling of over head lines/ pole/ aluminumover head conductor, G.I. Wire, cross arm, Angle ,insulators etc. complete in all respect and handing over to concerning SSE.

Supply and erection of three piece nonlinear resistor type lighting arrestor suitable 29 for 3 wire( 3 nos in set),11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating 5 KA and complete with galvanised clamping arrangement, GI bolts,nuts,washer etc as required. (2 nos at each crossing)

Supply and erection of 33 KV Polymer Lighting Arrester suitable for 3 wire ( 3 nos in 30 set),33 KV overhead lines with rated voltage 33 KV(rms) with a nominal discharge current rating 10 KA and complete with galvanised clamping arrangement,GIbolts,nuts,washer etc as required.(2 nos at each crossing)

Cross linked polyethylene insulated 11 KV volt cable Aluminium conductor with 31 extruded semiconducting compound screened and copper tape laid up with extruded inner sheath of plastic tape with filler at interstices, galvanized round wire/steel strip armoured and over all PVC sheathed cable confirming to Is : 7098/Pt.- II/2011 with latest amendment, size 3 core 240 sq. mm

Supply of 33 KV (E) grade (3 core 300 sq mm) HT cable stranded compacted circular 32 aluminium conductor screen semi conducting compound XLPE insulated,insulation screening with extruded semi- conducting compound in combination of copper Tape ,cores laid up inner sheath of PVC, galvanised steel flat string armoured and overall PVC sheathed cable confirming to Is : 7098/Pt.- II/2011 with latest amendment. Each

Preparation of final drawing in 02 sets and same to be got approved from UPPCL & Railway including collection of supervision charges.(for HT) Above/

G1B-Utility Shifting works (Group-B) 5000000.00 Below/P

To carry out Civil Engineering related works under any item of DSR-2021 40000000.

To carry out Civil Engineering related works under any item of USSOR-2021

Item Breakup - G1A-Bridge Foundation and Substructure Works - (Group A)

Metre Total 112018103.40 Conducting load test of a single pile up to specified capacity in accordance with IS:2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap Item- 2 and dismantling of test cap after test etc. with all labour, material, tool & plants, equipment, machinery, etc. complete as per drawing and specification, as directed by the Engineer. S No. Item Description of Item Unit Qty Rate Amount No Conducting load test of a single pile up to specified capacity in accordance with IS:2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. with all labour, material, tool & plants, equipment, machinery, etc. complete as per drawing and specification, as directed by the Engineer.

33.00 61672.84 T capacity pile

33.00 83063.16 250 T capacity pile

33.00 capacity or part thereof over 250 ton

33.00 30836.42 to 100 ton capacity pile

33.00 41531.58 up to 250 ton capacity pile Total 9831944.76 Lateral load testing of single pile in accordance with "IS Code of practice IS:2911 (Part-IV) for Item- 3 determining safe allowable lateral load of pile" with all labour, material, tool & plants, equipment, machinery, etc complete as per drawing and specification as directed by the Engineer. S No. Item Description of Item Unit Qty Rate Amount No CAO-C-NER-ENGG/NORTH EASTERN RLY Lateral load testing of single pile in accordance with "IS Code of practice IS:2911 (Part-IV) for determining safe allowable lateral load of pile" with all labour, material, tool & plants, equipment, machinery, etc complete as per drawing and specification as directed by the Engineer.

612.00 29086.76 ton and up to 100 ton Total 29542947.48 Steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, Item- 4 bending, placing in position and binding all complete. S No. Item Description of Item Unit Qty Rate Amount No Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

1550564.63 Fe-500D or more of approved brands/makes. Total 154978934.77 Item- 5 Supply and using Cement at Worksite S No. Item Description of Item Unit Qty Rate Amount No Supply and using Cement at Worksite

43 approved brands/makes Total 47585967.46