Extension behind new PG dining facility size 10 mt x 05 mt (with PUF precoated roof sheet)at IIHR residential colony at ICAR-IIHR Hesserghatta

Earth work in excavation by mechanical means(Hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavate dearth lead upto 50 m and lift up to 1.5m, as directed by Engineer- in- Charge. All kinds of soil for wall foundation, vertical pipe

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:5:10 (1 cement: 5 coarse sand (zone- III)derived from natural sources: 10graded stone aggregate 40 mm nominal size derived from natural sources) for wall foundation, flooring and plinth protection, pipe grouting

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 coarsesand:12graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement:6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for plinth beam

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level, Thermo-Mechanically Treated bars of grade Fe-500 D or more, for plinth beam, and for vertical members lateral supports

Providing and constructing concrete block masonry using 150x 200x 400mm solid core compact concrete block (GradeC–50Kg/Cm2) in CM1: 6 including all scaffolding, curing, etc. complete For walls

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement–All work upto plinth level 1:2:4(1 cement:2 coarse sand (zone-III) derived from natural sources:4 graded stone aggregate 20mm Nominal size derived from natural sources)for plinth beam

Providing Cement plaster1:3 (1cement:3coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Providing and applying white cement-based putty of average thickness1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Birla, Asian Tractor / Jonson Nicholson / Berger)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and color. Two coats (Asian Tractor/Jonson Nicholson/Berger)

Finishing walls with Acrylic Smooth exterior paint of required shade new work(Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10sqm)(Asian Tractor/Jonson Nicholson/Berger)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc. complete. For verticals, roof purlins and side horizontal

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Asian Tractor / Jonson Nicholson / Berger)

Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, leveling and tamping with steel rammers, and dressing up, in below floors etc., lead upto 50 m and lift upto 1.5m all kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- 1:3:6(1Cement: 3 coarse sand (zone-Ill) derived from natural sources: 6 graded stone aggregate 20mm nominal size derived from natural sources)

Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS:277 in 240m pa steel grade, 5-7microns epoxy both side of the sheet and polyester top coat15-18 microns using self drilling/self tapping screws complete tiled shaped as per approved sample For side rain shade

Providing and fixing in position 60mm thick factory made sandwiched puff panels between two Engineered sheets of precoated profiles sheet of 0.45mm (+0.50%) with plain on one side and corrugated on the other side both the sides total coated thickness with zinc coating 120grams per sqm as per IS:277, in 240 m pa steel grade 57 microns epoxy primer on both side of the sheet and polymer tp coat 15-18 microns, sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation .The sand witch panel core shall consist of 50mm thick puf of density not less than40kg/per cum(+/-2).Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer in charge

Supplying and fixing with close nit SS me shall round to avoid snakes as per approved sample

Providing and fixing aluminium work for, windows with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD M rubber /neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stain less steel screws, all complete as per architectural drawing sand the directions of Engineer-in- charge.(Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters and doors, windows including providing and fixing hinges/pivot sand making provision for fixing of fittings wherever required including the cost of EPD M rubber/neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum Thickness of powder coating 50 micron)

Supplying fixing standard star lock for sliding window shutters as per Approved sample

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners all necessary fittings complete, Including applying a priming coat of Using flats 30x6 mm for diagonal braces and central crosspiece

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 20 mm nominal dia Pipes

Providing and fixing brass bib cock of approved quality 20mm nominal bore as per approved sample as per approved sample only

Supplying and fixing of PVC gate valve 20mm as per standards

Supplying and laying fixing PVC pipes (4kg/ cm2-ISI- Finolex/ Supreme / Kisan/ Prince/ Canara/ Ashirvad) with all required collars, bends , elbows, tees, sockets, bush with pvc solvent etc.

Including providing PVC clamp sat every one meter, complete as required atsite100mmfor sewer line 75 mm dia pipe for drain pipes and vent pipes

Providing and fixing 32mmThk polished cuddapah slab to size for shelves

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting sand brackets, cutting and making good the walls wherever require White Vitreous China Wash basin a size 630x450 mm with a single 15mm C.P. brass pillar tap (Cera, jaquar, Parry ware, Hind ware)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4coarse sand),jointing with grey cements lurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. SizeofTile600x600mm