ADDN/ ALTN TO MT SECTION AT AFS BORJHAR

Amount

M&L for preparation of New and old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint, complete all as specified & directed.

Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges, complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed .

Provision of 9mm thick ceiling tiles of size 595mm x 595mm for insulation and acoustic purposes including aluminium anodised section of size, wall angle 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 4mm dia GI wire of suitable length and including fixed & aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions complete all as specified and as directed by Engineer-in-Charge. Make :-- Aluminium section : -- INDALCO/ HINDALCO/ JINDAL (ii) Perforated/Semi Perforated TILES :--- ARMSTRONG/ LAFARG.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, comlete all as specifed and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for reinforced cement concrete M20 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like as specified and as directed.

Taking down chowkhat or frame, exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.), complete, all as specified & directed.

S&F anodised aluminum Grill made of 5 mm dia aluminum bars, size of mesh 50 mm by 50 mm fixed together with aluminum frame of size 40mm by10mm by 1.9 mm thick for aluminum window, complete, all as specified and directed

S&F 4mm thick tinted coloured glass, with oil putty in square in not exc 0.5 sq.m in each pane complete all as specified and as directed

S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete, all as specified & directed.

S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 50 micron reflective type (greater sun control or equivalent) complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified.

Removal of excavated material exc 250m and not exc 500m and deposited where directed

M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified & directed.

M&L for 150 mm thick PCC 1:2:4 type B2 using 20mm graded stone aggregate as in sides filling and mass concrete complete all as specified and directed by Emgr-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for preparation of new undecorated plastered/concrete surface by rubbing down and applying two coat of synthetic enamel poaint over a coat of primer over 10cm girth or width,all as specified.

M&L for cutting and filling of Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with grade A sealing compound complete all as specified and directed.

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed

Demolition of cement concrete ,un-reinforced in ground floors and paving not exceeding 15 centimetre thickness, below or above ground level complete all as specified and as directed.

Demolition of cement concrete ,(reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar , in 150 mm internal dia complete all as specified and as directed.

Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar , in 100 mm internal dia complete all as specified and as directed

Taking down cement plaster , any description , from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed.

M&L for 100mm bore reinforced concrete pipe, class NP3, laid and jointed (in CM 1:1) complete with collars all as specified & as directed (Excavation and earth work shall be measured and paid separately)

All as per Serial Item No 36 here-in-after above but 150 mm bore pipe

M&L for Concrete bed to drain pipes for 100 mm bore SGSW drain pipe in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 100 mm bore pipe complete all as specified and as directed

M&L Plain Cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channel, drain complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded agg as in coping all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with WPC as per manufacturer's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed (Note:- WPC will be measured and paid for separately.

M&L for 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified.

Supply only integral water proofing compound as per latest IS specification complete all as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L Pre-cast cement concrete cover slab for manhole and drain cover in plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces complete all as specified and as directed

Cutting into existing manhole, 100 mm bore pipe, for connecting new drains making good to pipe and removing cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed

Cleaning of blocked Soil Pipe Vertical stack 100/110 mm dia by opening inspection eye door of bend/ branch pieces, rodding till smooth flow and refixing of door after cleaning including necessary scaffolding all as specified and directed.

Supply and fixing in repair SWG gully traps square type size (150x100)mm complete all as specified and directed. .

Taking down/removing gully trap covers from waste pipes of kitchen and bathrooms, removing blocked waste materials cleaning and re-fixing the gully trap covers complete all as directed.

Cleaning manhole by taking out sludge in semi liquid/solid stage (incl. all water etc) from inside of manhole of depth not exceeding 1.5 m and removing the sludge to a distance not exceeding 50m depositing in trenches including supply and sprinkling bleaching powder and covering sludge with earth to a thickness not less than 30 cm including all earth work, returning filling, removal of surplus soil & necessary temporary cleaning as directed by the Engineer-in-Charge.

All as per item 53 here in before but for cleaning of septic tank 50 users up to any depth. complete all as directed by Engineer-in-Charge.

All as per item 53 here in before but for cleaning of septic tank 25 users up to any depth. complete all as directed by Engineer-in-Charge.

S&F in repair 75mm bore PVC(SWR) bends any radius with access door as in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC(SWR) bends any radius with access door complete all as directed

M&L 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing complete all as specified and directed by Engr-in-Charge.

S & F Vitreous china wash hand basin ,white flat back of size 550x400mm including bracket, cutting for pinning in ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with brass CP nuts on both sides, PVC washers, fixed in repairs all as specified.

S&F in repair Pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed.

S&F in repairs 15 mm dia bib tap cast copper alloy CP fancy type with capstan head long body and cup screwed down for iron pipe all complete all as specified and directed.

S & F in repairs for PVC low level flushing cistern 10 Ltr capcity Valve less duel symphonic action type, flushing cistern , low level white, with inlet ball valve flat and handle including PVC flush pipe 32mm bore and mild steel brackets made out of 25 by 25 by 3mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4) complete all as directed .

S & F in repairs viterous China Wash down water closet Pan 'Pedestal Pattern' white with seat cover white closet pattern with flat battom and cover mild steel chromium plated or aluminium anodised hinging device and joints etc and connection to drain, flushing ,pipe, anti symphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concerete 1:2:4 type (B-0) complete all as directed .

S&F in repairs 15mm dia of fancy type chromium plated Angle stop valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed.

M&L for Non skid ceramic coloured tiles exceeding 0.06 but n exceeding 0.11 sqm) premium type in floors etc and jointed in neat cement slurry and pointed in coloured cement to match with the coloured tiles over screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/400x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with screed bed 15mm thick in CM (1:6).

S&F in repairs Vitreous China urinal bowl type flat back or angle back type, size( 465x355x265m) or (430x370x340mm) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified.

S&F in repairs CP hand shower (Health faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (Black flow preventor) (Make Jaquar, Cat No ALD CHR -583). Complete all as specified.

Taking out steel water tubing 15 mm bore and connections including cleaning for refixing or credit to the contractor complete all specified

Taking out steel water tubing 20 mm bore and connections including cleaning for refixing or credit to the contractor complete all specified

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified & directed.

M&L for Reinforced cement concrete design mix M 25 forFoundation, including raft footings, foundation beams, plinth beams, bases for column etc.basement slabs, underreamed piles and mass concrete,complete all as specified & directed.

M&L for Reinforced cement concrete design mix M25 for Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter

M&L for Formwork to faces of walls, colums and retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter

M&L for Mild steel framed work as in gates for ornamental and intricate design and painted one shop coat of primer including preparation of new steel surface all as specified and directed.

M&L for preparation of new steel surface and apply synthetic enamal paint (ordinary tint) over a coat of red oxide Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as pecified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in sides filling and mass concrete complete all as specified and directed by Emgr-in-charge.

Material and labour for Point wiring with 1.5 Sqmm FR PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable in and incl rigid PVC conduit concealed /PVC surface conduit with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness hylum laminated sheet , cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm (FRLSH) PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note:- (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed

All as per serial item No 82 here in before but for one 3 pin 5 Amp socket outlet on independent board.

Material and labour for Point wiring with 2.5 sqmm PVC insulated and sheathed multi stranded(FRLSH) flexible copper conductor cable drawn in and including rigid PVC surface conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistranded) PVC insulated and unsheathed Cable as earth wire to common earth dolly, complete all as specified and directed by Engr-in-charge

Supply and fixing of switch piano flush type 240 Volts 6 Amps, SP, one way complete all as specifed/directed.

Supply and fixing of switch socket outlet combination 5 Pin,6 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 6/16 Amps and (with 3 pin 6 Amps outlet also) flush type (non shuttered) complete all as specified directed.

Material and labour for ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block, 6A, Pilot 2 Plate, complete all as specified and directed by Engr-in-charge

Supply and fixing of LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC conduit surface of adequate size with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through pvc conduit concealed and connected common earth dolly including taking out the old sub main wiring shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Supply and fix in repairs of MCB TPN DB 8 way double door, glazed type, IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed. Make- Legrand / Indo asian / Havells or its equivalent in specified makes in CA.

Supply and fix in repairs of MCB SPN DB 4 way double door, glazed type, IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed. Make- Legrand / Indo asian / Havells or its equivalent in specified makes in CA.

Supply & fix in repair of MCBs single pole (SPN) 6 to 32 Amps with 10 KA breaking capacity of 'C' Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed.

Supply & fix in repair of MCBs Three pole and neutral (TPN) 63 Amps with 10 KA breaking capacity of 'C' Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed.

Supply & fix in repair of MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Supply and fix heavy duty air circulator fan, metallic body AC single Phase. 230V of size 600m sweep with, blades, and frame.

Material & labour for Sub main wiring with two runs of single core 1.5 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh PVC conduit and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 1.5 Sqmm as earth wire (green in colour) run through PVC conduit and connected common earth dolly in PVC conduit pipe and complete all as specified and directed.

Supply and fixing blaze LED highbay luminary with high efficiency(100lm/W) of capacity 150 watts including all accessories internally pre-wired and connecting with three core PVC insulated and sheathed circular cable of multistranded copper conductor cable 1.5sqmm from ceiling rose to light fitting, complete all as specified and directed.

Supply and fixing of switch piano flush type 240 Volts 16 Amps, SP, one way complete all as specifed/directed.

Supplying, erecting, testing and commissioning Raising & Lowering type 16 metre height high mast system hot dip galvanised inside and outside) in single dip, suitable for wind velocity as per IS 875 part 3 with only one longitudinal seam weld per section but without circumferential weld including accessories viz head frame, 2-point suspension system with steel wire rope 6 mm dia 7/19 gauge, double drum winch, galvanised lantern carriage arrangement suitable for and with 9 luminaires symetrically, Lightning finial, LED aviation obstruction light, lighting arrester spike, foundation bolts, nuts anchor plates, templates, trailing cable & intergral power tool for raising and lowering operation of high mast with and including technical specifications as per Annexure "I" enclosed hereafter (Make: Havells/Crompton/Philips)

Supply and fix timer switch astro type (Having longitude and latitude of Indian cities in memory) 250 V single phase of Max load capacity 6 KW rating with contactor rating 32A/TP and MCB rating 40A/TPN fitted inside steel enclosure confirms to IS/IEC 60947-4-1 provided with protection degree IP54 with inbuilt Short - Circuit protection and class H insulation.

M&L for sand cushioning for protection of lT under ground cable with screen wash sand and punning to proper reqd cover all as specified and directed.

M & L brick protection with old size sub class ‘B’ brick for PVC under ground cable protection in trench with width equal to length of brick laid dry and flat joining each other with gap between adjacent brick not exceeding 10mm over LT under ground cable all as specified and directed.

S&L in repair of UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area incl taking down of size 25.0 sq mm 3.5 core complete all as directed.

Supply & fix 40 mm bore GI tubing “light grade” in trenches/ on pole for protection of cables complete all as specified & directed.

M&L for cement concrete in foundations, filling and mass concreteType C2 1:3:6, 40mm graded aggregate all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the Galvanised iron earth strip 32x6mm size by means of bolls, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI medium grade pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) reinforeed with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 40x40x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filled 150mm thick all around each plate, test point made out of 40x8mm flat iron galvanised with fixing arraangement, funnel wire mesh and earth work in any type of soil returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electical plate -3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the Galvanised iron earth wire 4.0mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) reinforeed with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 40x40x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering , perforated at botytom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filled 150 mm thick all around the earth plate test point made out of 40x8mm FI galvanised with fixing arraangement, funnel wire mesh and earth work in any type of soil returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L Galvanised iron strip 32 x 6mm buried in ground all as specified and directed by Engr-in-charge.

M & L for Energy saving,environmental friendly, long life, exclusive innovative die-casting aluminium IP66 flood light of capacity 210/200W,suitable for highlighting architectural facade and general purpose lighting complete all as specified and as directed.Make:- Philips/Havells/Crompton

M/s JK Jangid and Company

M/S PRASANTA MAHANTA

Shri Debajyoti Das