ARTC/DGAR/SKV/66

Amount

REPAIR/MAINT WORKS

Supply, installation, testing & commissioning of factory made cubical flour mounted outdoor distribution feeder pillar box with built-in APFC 100 KVAR for 500 KVA transformer , totally enclosed dust and vermin proof, front side opening with locking arrangement made of angle iron frame work of size 50mmx 50mmx6mm thick and 2.00 mm thick MS sheet duly powder coated , suitable for 800 amp capacity aluminum bus bar , size of the panel board should be not less than 2250 (W)x1600(W) x 900 mm (D) with stand height of 450 mm and internal wiring should be copper multistrained conductor including cooper Nuts& bolts, terminal Lugs comprising as follows:-

Dismantling of existing UNSV LT feeder pillar panel complete incl disconnection of wiring complete with necessary connection complete with taking out subject panel board incl UNSV UG cable and deposted to store yard of ARCH at Shokhuvi.

Earthing of machinery/equipment Installed at power house/substation, using 25 x 3 mm copper strip and copper plate of size 300 x 300 x 3 mm, as earth electrode.

Dismantling of existing distribution feeder incl re- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above upto 400 sq. mm Cable.

Supply and fix double compression copper stain less steel gland for fixing armoured cable in panel of size cable of size 3 .5 core 400 SQMM size

but for cable of size 3.5 core 95 sq mm to 120 sqmm size

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit and all connected works 1.5 sq.mm. FR PVC insulated copper conductor singlecore cable etc as required and as directed at site. (92 Qtrsx3 Points (2x light pts and 1xfan Points)

Wiring for circuit/ submain wiring along with earth wire with the 1.5 Sqmmx 3 wires FR PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit as required (main DB to User DB)

S/F MCB DB 12 way SPN,240 Volts complete

S/F MCB SP 6 Amps,240 Volts AC complete

Supplying and fixing DP PVC Box enclosure on surface/ recess along with 6 amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

CENTURY ENTERPRISES

SHUBHAM CENTRE