Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC 44 EKTA NAGAR MP 4 ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L1 | Accepted-AOC Bidder L1 lowest | |
| 2 | L2₹38.9 L+₹1.1 L (2.95%)Rejected-Finance 1 SANCHAR NAGAR NEAR KRISHI UPAJ MANDI DAMOH ROAD JABALPUR M P | JABALPUR | MADHYA PRADESH | 482001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹39.1 L+₹1.4 L (3.60%)Rejected-Finance 114 BARH CHONDI BARH PATNA BIHAR 803213 | PATNA | PATNA | BIHAR | 803213 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
CERTAIN REPAIRS TO B/R AND E/M MAP ACCN AND OTHER ADJOINING OF AGE B/R- I UNDER GE (WEST) JABALPUR
2022_MES_533687_1
8496/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per Tender documents
5 documents required · 5 mandatory
₹500
GE (West) Jabalpur
₹80,000
25 Aug 2022
25 Jun 2022
28 Jul 2022
25 Jun 2022
26 Jul 2022
9 Jul 2022
27 Jun 2022 - 7 Jul 2022
Amount
Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match layed over and including 15 mm thick screed bed in CM (1:6) etc all complete.
Material and labour for Glazed ceramic tiles of size 300x200x7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering in CM 1:4 etc all as specified and directed .
Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering in CM 1:4 etc all as specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles exceeding 0.36 sqm, but n exc 0.42sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) layed over and including 15mm thick Screed bed or bedding layer in cement mortar 1:6, etc all complete.
M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc layed over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick etc all complete (Make-H & R Johnson, Brand-Endura designer digital series)
M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc all complete.
M& L for Machine cut kota stone slab flooring 15-18mm thick in riser of steps skirting dado in pillar with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing layed over and including 15 mm thick in CM 1:6 screed bed etc all complete
M& L for Machine cut kota stone slab flooring 18-20 mm thick layed over and including cement screed base 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc all complete
M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.
M&L for providing Machine cut Cudapph stone slab 20-25mm thick as on cooking platform/shelf 20mm thick over and including cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for colour rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments laid over and including 15mm thick screed bed in CM 1:6 etc all complete.
S&F Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed over and including sand filling 50 mm thick etc all complete.
Ditto all as per above items but of 80 mm thick M-40 Grade
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor finishes/ sub base 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.
M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floors as sub base using extra cement in patches etc all as specified and directed by Engr-in-charge.
M&L for 100 mm thick PCC 1:4:8 type type D2 using 40mm graded stone aggregates as in floors as sub base in patches etc all as specified and directed by Engr-in-charge.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc complete all as specified and directed.
Ditto all as per above items but except brick
M&L for half Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete etc all as specified and directed.
M&L for brick works with FLY ASH Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete etc all as specified and directed.
M&L for half brick thick wall with FLY ASH Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete etc all as specified and directed.
Repairing sunken floor leakage by taking out existing nahani trap/floor traps carefully by digging out from its position and provision of new PVC (SWR) nahani trap n .exc 100mm dia and joining the same to existing waste pipe of any dia and ensure leak proof joints including making good the adjoining area to match with existing floor tiles etc with PVC NT/FT grating, complete all as specified and as directed .
S & F Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.
S&F in repairs Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
S&F in repairs Aluminium anodised sections with powder coated for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
S&F in repairs Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Taking down cement plaster and girth plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete etc all as specified and directed
M&L for Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4(1 cement : 4 coarse sand ) following the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing ,the top layer with brushes and water expose the stone chippings complete all as specified.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed
M&L for 5mm thick ceiling plaster in CM 1:3 finished even & smooth w/o using extra cement in patches etc all as specified and directed by Engr-in-charge.
M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M & L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfaces of any description over 10 cm width or girth.
M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.50
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
Preparation of new decorated surfaces of walls and applying two coat of distempering with acrylic washable distemper oil emulsion white or tinted complete etc all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling and apply three coat of white wash complete all as specified and directed
Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.
Supply only Integral waterproofing compound complete
S&F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.(As per Cat No. 6806 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.(As per Cat No. 6808 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair 15mm bore PVC bib taps etc all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, etc all as directed by Engr-in-Charge.(As per Cat No. 6850 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete etc all as specified and directed by Engr-in-charge.
S & F in repair Brass CP bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed(As per Cat No. 6875 of Make Prayag or equivalent Make as approved by GE.)
S & F in repair Brass CP sink Mixer for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed (As per Cat No. 6855 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. (As per Cat No. 6810 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair 15mm bore PVC stop valves all as specified and directed by Engr-in-charge.
S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. (As per Cat No. 701 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair Health faucet,( code ALD 573 of Jaquar or Cat No. BEA-81 of Make Prayag or eqv)
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl suitable size of brackets etc all as specified and directed by Engr-in-charge. (As per Cat No. 4642 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor including provision of lime concrete at required as per site etc all as specified and directed by Engr-in-charge (As per Cat No. 4053 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair vitreous china semi-pedestal pattern (Anglo indian type) (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor etc all as specified and directed by Engr-in-charge
S&F in repairs Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed (As per Cat No. 4018 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair plastic water closet seat cover white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device etc all as specified and directed by Engr-in-charge. (As per Cat No. 513 of Make Prayag or equivalent Make as approved by GE.)
S&F in repair 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.
Ditto all as per above items but 20mm dia all as specified and directed by Engr-in-charge.
Taking down and including cleaning for refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.
Ditto all as per above item but 20mm dia etc all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or fixed on walls complete all as specified and directed.
Ditto all as per above items but 75mm bore complete all as specified and directed.
Ditto all as per above items but 40 mm bore complete all as specified and directed.
S&F in repairs 100mm dia Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified
S&F in repairs PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed
S&F in repairs PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
S&F in repairs framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-2990 ( Gde E-165).
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.
Dismantling of plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified
S&F in repair chromium plated Single handle sink mixer cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore Swan Tap Type Pillar Cock Single Tap pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge
S&F in repairs framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165
Taking down chowkats or frames n exc1.5 sqm with shutter (without taking off shutters from the frames).
Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames).
Taking down shutter n exc 1.50 sqm of any description
Taking down shutter exc1.5 sqm n exc 4 sqm of any description
M&L for Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.
M&L for Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge
Taking down and Refixing of shutters of any description n exc 1.0 sqm each, in same opening etc all as specified and as directed.
Taking down and Refixing of shutters of any description n exc 1.0 sqm but n exc 2.0 sqm each, in same opening etc all as specified and as directed.
S&F, 1st class HW Beads, straight ( 75 mm size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to store (Plain or moulding as requirement)
S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing
S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints
S&F 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side etc all as specified and directed by Engineer-in-Charge.
S&F 35mm thick second class hardwood glazed and skelton door shutters (minimum 3 panel in each shutter ) open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.
S & F 12 mm thick toughned glass plain / designing pattern as directed by GE including all necessory accessories for fitting door/window/partion
S&F 3 mm figured glass, pin head type and glazing with beads fixed with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.
Supply and fix in repairs sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
Supply and fix in repairs figured glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws .
S&F Solid PVC Door Frame (Single rebated) of size 60mmx 30 mm made out of soild PVC Foam with homogenous fine celluar structure having smooth outer integral skin with 100x8 sheet metal CSK SCREWS complete all as specified and as shown on drawing(Note : door frame shall be water proof ,termite proof,elegant and should have excellent screws holding strenght to fixed hings and hold door properly for long life)
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing
S&F 2nd class Hard wood factory made plain framed ,35 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered Partical board with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-charge.
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F Steel window with side hung shutters incl projecting type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.
S & F Steel window with side hung shutters incl projecting type hinges with steel handle , steel peg stay, complete without glazing bars dovetailed and welded.or ventilators, fixed type, complete all as specified and directed..
S&F Factory made pressed steel window box type (openable) with side hung shutters (fabricated from P-tube section as shown on drawings) including mild steel acessories like lugs, door stopper, box type hinges, handles, and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with glazing bars dovetailed or welded with one shop coat of zinc chromate primer and filling of PCC, complete all as specified and as per TD Drg No CEJZ/TD/980/Sht 1/2 to 2/2.
S&F Factory made pressed steel window box type , fixed type (fabricated from P-tube section as shown on drawings) including necessary mild steel acessories etc. with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified filling of PCC and as per TD Drg No CEJZ/TD/980/Sht 1/2 to 2/2..
S&F in repair 12 mm thick plywood grade BWR,type BB, Fixed with screws to timber frame work,shelves etc all as specified and directed.
Supply and fixing 1 mm thick decorative laminated sheet type-I of surface finish colour and pattern as approved ,fixed with approved adhesiva as manufacture.
Supply and fixing in repair oil pull out plain basket, Thali basket, cup&saucer, cutlary tray, & Binholder (sleek make) of SS304 grade anticorrosive material .
S&F in repair telescopic wall -bearing shelf closing channels ( exc 300mm but not exc 500 mm ) etc complete all as specified and directed.
S&F in repair Handles of senso (as per 3D designs) 150 mm including all connection fitting as complete all as specified and directed and approved by GE.
S&F in repair Europa cupboard locks as complete all as specified and directed.
S&F in repairs 12mm thick as in Prelaminated particle board interior grade ,prelaminated one side with decorative choice lamination and other side balancing white fixed with screw to timber/steel frame work as in cupboard partition,shelves all as specified and directed
S&F in repairs 18/19mm thick in Block board grade 2,interior grade ,commercial type fixed with screw to timber/steel frame work etc all as specified and directed
S&F in reparis 12mm thick Block board grade 2,interior grade ,commercial type fixed with screw to timber/steel frame work as in cupboard partition,shelves etc all as specified and directed.
S&F 30 mm width of flaps Continous(piano)hinged, mild steel bright finish or electrogalvanised etc complete all as specified and direcated
Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet and cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.
S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F in repairs Butt hinges medium weight cold rolled mild steel 100mm long complete.
Ditto all as per above items but 75mm long size complete.
S&F in repairs 40 mm dia , brass cupboard knobs fixed with nut ,screw and washer of mild steel bright complete
S&F in repairs Aluminium anodised barrel tower bolts of extruded section 200mm long complete,
S&F in repairs Aluminium anodised barrel tower bolts of extruded section 150mm long complete,
S & F in repairs Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete.
S&F in repairs Aluminium handles cast type anodised of 150mm complete.
S&F in repairs Aluminium handles cast type anodised of 100mm complete.
S&F in repairs Brass handles cast type anodised of 150mm complete.
S&F in repairs Brass handles cast type anodised of 100mm complete.
S&F in repairs mild steel pressed handles cast type anodised of 150mm complete.
S&F in repairs mild steel pressed handles cast type anodised of 100mm complete.
S&F in repair Mortice lock,vertical type size 100 mm 4 lever Make- Godrej as complete all as specified and directed
S&F in repair Corner Glass Shelves,( code CAN 1173 of Jaquar or eqv)
S&F sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long.
S&F in repair Brass sliding door bolt with brass hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections orBrass of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F in repairs brass barrel tower bolts of extruded section 200mm long complete,
S&F in repairs brass barrel tower bolts of extruded section 150 mm long complete,
S&F in repairs 40-50 mm Floor door stopper of aluminium alloy body and tongue anodised with hard steel spring ,fixed in floor complete
S&F in repairs 75 mm Z-Section Window hingsmedium weight cold rolled mild steel Completed
Running welding in repairs n exc 6 mm thick metal (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /)
M&L for Welding in repairs n. exc 2.5cm in length etc all complete
Ditto all as per above items but exc 2.5cm but n exc 5cm in length etc all complete.
S&F in repair Curtain dropary 25mm dia stainless steel rod of fancy type including brass and brackets with curtain rings of approved quality etc complete.
S&F in repair stainless steel Nobs and bracket complete all as specified and directed.
S & F in repair curtain rod 25 mm dia chromium plated , mild steel,with fixing brackets, stops, rollers etc.
S&F in repairs floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.
S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-charge.
S & F in repair Door Seal rubber etc, complete all as specified
Supply & fixing in repairs frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing.
S&F in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. (As per Cat No. 554 of Make Prayag or equivalent Make as approved by GE).
S&F in repairs PVC connection 15mm bore size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. Make:- Symet/ Prayag
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed of Make Nirali/Bluestar
S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm etc all complete of Make Nirali/Bluestar
Dismantling of timber scantlings unframed 40SqCm and over in section, in any position
M&L for second class hardwood, clean sawn timber in scantlings fixed in unframed work.
S&F in repairs stainless steel plate rack, 0.56mm thick of standard pattern, 31”x36” size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified.
Demolition RCC jali in any description in any position all as specified and directed by Engr-in-Charge.
M&L for providing precast cement concrete louvered and jali 35-40 mm thick type BO 1:2:4 (12.5 mm graded stone aggregate set in cm 1:4 including all mouldings all as specified and directed by Engr-in-Charge.
M&L for precast frame for RCC jali set in cm 1:4 all as specified and directed by Engr-in-Charge.
Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.
S&F TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.
M&L for Fromwork to Soffiting of Suspended slab such as roof slab,floor slabs landing and similar work not exceeding 200 mm thickness as directed by Engr-in-Charge
M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.
Repairs to leaking water in longhbody bibtap, pillar cock, stop cock, PVC waste pipe, wall mixer, WHB mixer tap, bottle traps by changing washer spandle etc and any other minor accessories to make system functional etc all as specified and directed.
Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.
M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge. (a) One light/fan point controlled by one switch.
(b) One socket point 5 Amp controlled by one switch on same board.
(c) One socket point 5 Amp controlled by one switch on Independent board.
(d) One light point controlled by two way switch.
Description same all as per above here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 1.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge.
S&F drawing the wire in with casing caping complete with point wiring with FRLSH PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover or inner outer plates for modular switches with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed all as specified & directed by Engineer-in-charge for one light point/fan point/bell point controlled by one switch.
Ditto all as per above items but controlled by two way switch.
Supply & Fixing switch piano flush button type single pole one way 5 Amps (duly marked for light / fan etc on the body of switch) of polycarbonate complete all as specified & directed.
Supply & Fixing switch piano flush button type single pole two way 5 Amps) of polycarbonate complete all as specified & directed.
S&F in replacement PVC casing caping 25mm as required at site complete with fixing nails and making good the disturbed surfaces etc complete all as specified.
S&F in replacement PVC conduit 25mm medium gradeas required at site for passing through submains complete with all fittings such as tee, bends,elbow, saddle etc and making good the disturbed surfaces etc (Cutting , chasing,finishing shall be included in this Item complete all as specified.
S&F in replacement of frame plate for modular switch 3/4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F in replacement of frame plate for modular switch 6/8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F in replacement insulation deteriorated PVC insulated flexible copper conductor cable twin twisted of Size 24/0.20mm 1100 volts grade complete all as specified and as directed.
S&F in replacement MS Housing box 3/4 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.
S&F in replacement MS sunken box suitable for switches/ Socket/ FR as per existing site switch box and making good to the disturb surface by PCC complete all as specified and as directed.
S&F in replacement MS Housing box 5/6 module suitable for modular switch as per switch box and making good to the disturb surface by pcc complete all as specified and as directed.
S&F in replacement of single core wire 2.5 Sqmm multi-strand PVC insulated copper conductor FRLSH cable including connections of cable with MCBs or bus bars complete all as specified and directed.
S&F in replacement of single core wire 1.5 Sqmm multi-strand PVC insulated copper conductor FRLSH cable including connections of cable with MCBs or bus bars complete all as specified and directed.
Supply & fixing in replacement of integral post top lantern complete with black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories and suitable for LED min 15Watt lamp complete all as specified and directed . Havells cat part No RUBYMINIPT15WLED757PSYMTOPC or equivalent Bajaj/C&S
S&F in replacement of sheet steel enclouser distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.Make of Distribution Board Legrand cat no:5077 50 or equivalent in seimens /GE and Make of MCBs :Legrand/Seimens/GE
Supply & Fixing Modular switch bell push flush type suitable for 6 Amp 230 Volt of polycarbonate body complete all as specified & directed.
Supply & Fixing lamp holder / batten or angle holder Insulated body incl 9 w LED with back plate suitable for batten fittings complete all as specified & directed.MAKE:havells ,bajaj or equiv
Supply & Fixing Ceiling rose surface type 60x30 mm three terminals of polycarbonate body complete all as specified & directed.
Supply & Fixing Ceiling Fan regulator electronic type 280 Watt capacity of ploycarbonate body ISI marked complete all as specified & directed.
Supply & Fixing in repairs Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Make : Philips Cat part BN 021 LED 22S 6500/4000 PSU GR SI or equivalent in Bajaj
S & F LED in repairs Mirror light fitting 2 ft TL 5 10 watt complete with fixing arrangements on wall all as specified and directed.Make- Havells LUMILINEPLUSSBS10WLED865SPCSS or equivalent in PHILIPS ,BAJAJ
Supply & Fixing in repairs Bulk head endura LED light fitting complete 10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size and accessories & length complete all as specified & directed. Make :Havells Cat Part No. RUGBY NEONFT10WLED760SSYMBOPC or Equivalent make Philips / BAJAJ
Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,fixced over & including GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in philips or bajaj
S&F the modular switch 6 amps single pole one way for one modules as required at size of polycarbonate body ISI marked as per make at site req complete all as specified & directed.
S&F the modular switch 16 amps single pole one way for one modules as required at size of polycarbonate body ISI marked as per make at site req complete all as specified & directed.
S&F the modular socket 6 amps two to three pin way fortwo modules as required at size of polycarbonate body ISI marked as per make at site req complete all as specified & directed.
S&F the modular socket 16 amps two to three/ five pin way for two modules as required at size of polycarbonate body ISI marked as per make at site req complete all as specified & directed.
Supply & Fixing Ceiling Fan modular regulator electronic type 280 Watt capacity of polycarbonate body ISI marked as per make at site req complete all as specified & directed.
S&F in replacement of 3mm thick hylam sheet of any size including brass screws and washers etc as per required at site complete all as specified and as directed.
Supply and fixing in replacement of decorative wall light fitting made up of Polycarbonate ,Cylindrical shape ,with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. Make: CITY 1 OF HAVELLS or equivalent in Bajaj/Philips
Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.
Kirti Chandeliya and Assosicates
MAA SHARDA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .