Estimate for reconstruction work of damaged Beldar quarters for watching of regulator constructed at Km 81.100 of Faizabad branch

Demolishing brick work in Mud mortar manually/By mechanical means I/C stacking of unserviceable material withint 50 metres lead as per direction of Eng-in- charge.

E/w in cutting in foundation of masonary Work including lead upto 30 M. And lift upto 1.5 M and disposal and back filling as per direction of engineer-in-charge.

Laying Plain Cement Concrete in foundation 1:3:6 with stone grit including cost of material, labour, T&p etc, complete.

Bending,Binding,Cutting and Placing in position reinforcement including all cost of labour and material T&P etc. required for porper completion of the work/MT.

Centring and shuttering For R.C.C. Work including rent of shuttering & all cost of labour and material T&P etc. required for porper completion of the work/M2.Workdone as per as per Drawing & direction of engineer-in-charge.

Providing and Laying R.C.C M-20 (1:1.5:3) for Column, beams & slab I/C all Cost of labour T&P etc but excluding cost of Centering,Shuttering,Finising & Reinforcement.

Class 150 Brick work in 1:6 CM including 3 M lift and 60 M lead including all cost of material, labour, T&P etc. complete.

Fabrication of mild steel/iron work in grill, gates railing, door and window frames including cutting, drilling, welding/ riveting and hinges, where necessary and fixing in position including cost of all material, labour T&P etc. required for proper completion of work with one coat of red oxide primer.

12.00 mm Cement Plaster in 1:6 cement mortar including all cost of material, labour, T&P etc complete.

30 mm thick factory made pvc door shutter made of styles and rails of a upvc hollow section of size 60x30 mm and wall thickness 2mm with inbuilt decorative moulding edging on one side.the shutter frame filled with a upvc multichambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1mm wall thickness .the panels filled vertically and tie bar at two places by inserting 6 mm galvanised m.s. rod and fastener with nuts and washers complete as per manufacturers specification and direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant etc. as per specifications,and direction of Engineer-in-charge complete.

Dry earth filling including mannual compaction dressing lead upto 30m

Wall painting with plastic paint of approved brand and manufacture to give an even shade One or more coats on old work (Royal/Silk ( Asian/Berger)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on New work (Two or more coats applied @ 1.43 ltr/ 10 sqm)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 500Ltr. Water Storage Tank .

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan complete in all respect as per directions of Engineer-in-Charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs

P/F P.V.C. waste pipe & C.I Jali for sink and wash basin including cost of all material, labour, T&P etc.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

Providing & Fixing 110 mm dia PVC drainage Pipe complete in all respect including cost of all material, labour and T&P etc. as per drawing

PVC pipe connection for sink, wash basin, cistern. Gyger etc. with two nos. C.P. nuts.

P/F wash basin with 15mm pillar tap with C.I. or M.S. brackets complete in all respect including cost of all material, labour and T&P etc.

P/F stainless steel kitchen sink with C.1. Bracket excluding cost of other fittings.

Providing and fixing 25 mm outer Dia Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 20 mm outer Dia Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and Fixing Ceramic glazed wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 12 mm thick cement mortar 1:3 (1 cement :3 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including Pointing with white cement and matching pigments etc., complete.

S/F of LED tube light fitting suitable for 1x20 watt complete including LED tube light fitting etc. complete in all respect of Philips/ Bajaj/ NEXT. or Crompton

S/F Erection / testing of Cromptom ceiling fan and regulator etc. I/C supply of down rod, complete in all respects.