15/EUCC(XI)/(JZ)/2025-26

Amount

Safe loading & carriage including & proper stracking of following store material from ESC Lucknow /JE store to site of work .

33 KV 3x300 sq mm XLPE Cable

33 KV 3x300 sq mm XLPE St/Th J/Kit

33 KV 3x300 sq mm XLPE O/D J/Kit

33 KV LINE ISOLATOR 400/800 A

PCC Pole 11 Mtr

33 KV Composit Pin Insulator

MS earthing rod 20x2500 mm

LT PVC Cable 1x400 sq mm

Steel Section

Laying of 33 kV 3x300 sq. mm XLPE cable S/C including digging of trench 1050 mm deep, 450 mm wide along with required material Sand (0.115 Cub/Mtr), Ist class bricks (17.52 Nos/Mtr), stone pad (1.67 Nos size 600x750x50 mm) (As per JE instruction) and back filling the trench by soil (All the material required for laying will be supplied by the contractor except 33 kV XLPE cable)

33 kv3x300 Sq. Mm XLPE cable laying in MS/GI pipe 150mm dia single circuit (All the material shall be provided by the contractor except cable) as per resspo norms.

Cable laying by drill method HDD single circuit (All the material shall be provided by the contractor except 33kvcables)

Hoisting of 33 kv 3x300 sq. mm XLPE Cable on D/P with GI Pipe dia 6" its jumpring complete with clamps , nuts and bolts .(All the material shall be provided by the contractor except33kv cables & O/D J/K. )as per RESSPO NORMS

Hoisting of 33 kv 3x300 sq. mm XLPE Cable on cable stand its jumpring complete with clamps , nuts and bolts .(All the material shall be provided by the contractor except 33kv cables & O/D J/K. )as per RESSPO NORMS

High pressure testing of 33kv 3x300 sq.mm.XLPE cable .Testing equipment will be arranged by the contractor

Digging of pit of size 3x2x1 mtr. For making straight through joint 33KV work included filling of soil levelling and ramming of the same(ST/Th Providing by department )

Fabrication & erection of 33 KV cable exposure type double pole with the provision of separate bus bar for each cable with fixing of necessary clamps and other accessories like danger board, number plate, barbed wire, 9 no. pin insulators with pins,2 no. channels 100x50 mm (1600mm each),1 no.MS channel 100x50 mm(3200mm in length) and 2 no.MS angle 65x65x6 mm (each 3200mm in length ) for supporting the hoisting of cable etc. Its jumpering by single core PVC aluminium cable with proper size of lug as per RESSPO norms.(All material to be arranged by contractor except PCC Pole, MS Channel, MS Angle, 33 KV Pin Insulator, 33 KV Pin with nut &PVC cable).

FABRICATION ,ERECTION & GROUTING OF ISOLATOR STRUCTURE:- Fabrication of isolator structures 3.5 Mtr. In height as per drawing No. RES 39.Digging of two Nos.pits of size 1.075x0.9x0.3 Mtr. Providing stone pad at the bottom of the pit and grouting pad at the bottom of the pit and grouting of two legs of the isolator structure in CC (cement coarse sand and stone grit of 20m.m gauge)of the ratio 1:4:8 in block of 1.075 Mtrx0.3 mm including supply of all T&P complete in all respect. Both plinths of the isolator structure shall be properly finished with smoothening of edges.

Assembling and installation of line / bus isolator on the isolator structure , In case of isolator proper operation of earth links shall also be insured. The work includes fabrication for proper flexing if required.

Providing ,fixing &grouting of stone cable route marker on cable route .displaying feeder name, voltage & depth.(All the material shall be provided by the contractor) as per norms.

Earthing by way of boring and lowering of "B" Class GI pipe 50 mm dia from ground upto the water level(minimum 30 mtr. Deep )as per standard practice (All material shall be provided by the contractor except the supplied items )as per resspo norms.

Fabrication & erection of cable stand with grouting & plinthing as per resspo norms .(steel material provided by department)

Painting of all structures & equipment. (All materials shall be provided by the contractor ).as per RESSPO Norms.

Painting of 33 kv feeder Name on the End type Double Pole/Cable Exposure/ Cable stand as per instruction of site engineer

Grouting of PCC Pole in depth of 1/6th the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone grit as per RESSPO norms.

Scanning/Tracing of existing underneath power cables, water pipe line, gas pipe line, sewer pipe line on proposed route to avoid possibilities of any kind of damage during digging of trench/drilling for laying cable. (Scanning machine will be provided by the contractor)

Plotting of cable layout route & providing the map (i.e. depth Undernet and distance from either side of prominent reference fixed points). The reference must be not more intervals of 100 meter.(All material shall be provided by the contractor) as per norms.

All earthing strip shall be painted by green color (All Material Shall be arranged by the contractor)

Return of Balance material including Cable Drum from site to store, including handling, loading, unloading, and transportation as per project requirements

GST SHALL BE PAID EXTRA

A.A. ENGINEERING CO. (BID ID -5561538)