Interior fit out works of officers flats of SIDBI 14 nos 2BHK and 3 nos 3 BHK at SIDBI Apartments, Kolkata

S.No. Description BOQ Amount

1 Total Civil Works 23588453.00

2 Total Electrical Works 4386281.00

3 Total Modular Kitchen Works 5584078.60

Digitally signed by AMIT

Estimate for Interior fit out works of officers flats of SIDBI (14 nos. 2BHK and 3 nos. 3 BHK) at SIDBI Apartments,

S.No. Description of item Unit Qty Rate Amount

Carefully dismantling brick work in partition walls of any thickness

including cement plaster, tiles dado, mosaic cladding etc.on one or both sides

of wall or including any other finishes of wall etc.as existing at site. Stacking the

serviceable materials at required place as directed and disposal of debris upto

50 mtr leads and lifts etc. complete as required at site as directed by the Engineer

Carefully dismantling existing RCC cooking platforms of size (approximately)

5000mm x 600mm including sink, supporting systems like brick walls, kota

stone cladding, plumbing & sanitary connections, kota stone/mosaic finish & its

base mortar, removal of IPS or any other flooring along with brick on edge

below the kitchen platform/R. C.C. slab etc. all complete as available/required at

site as directed by the Engineer In Charge.

Carefuiily dismantling of RCC chajja with required manpower ,t&p etc.Rate

also include cutting of reinforcement with cutter machine and repairing of

adjoining area with cement mortar .Rate also include shifting of debris upto

50mtr lead and lift complete

A 5000 x600mm approx size Each 17.00 4130.00 70210.00

1500 x600mm approx size

Shifting of debris /malba by truck to approve dumping yard i/c all labour and

truck charges, loading and unloading.

Carefully removing the existing geyser and water purifier at kitchen and

geyser at the bathroom along with its plumbing connections and fittings etc. and

stacking the geysers and water purifires at location directed by the Engineer In

Dismantling doors and windows (MS,steel or wood) including shutters. chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead

Providing and laying brick work in half brick thickness with best

quality locally available bricks in cement mortar 1:4 (1 cement: 4 coarse

sand) including raking out the joints, curing, necessary scaffolding and

providing and placing two nos. of 6 mm dia. M.S. bars longitudinally in every

4th layer etc. all complete at all level and height all as directed

by the Engineer In charge.

Carefully removing the existing plaster of ceiling and walls up to existing

R.C.C. surface including dado/cement punning or any other finish over

plaster etc., up to brick work surface or as required at site including cutting the

patch in proper shape etc. all complete as directed by Engineer-in-Charge. The

quoted rates shall also be inclusive of cost of scaffolding & removal of all debris

and cost of removing skirting.

Providing and applying internal plaster to ceiling & walls in CM of desired

proportions at all heights & levels with all leads & lifts matching to

9 the surroundings including scaffolding, curing & site cleaning etc., all

complete as directed by the

Engineer- In-Charge.

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

(a) 08 mm thick (avg.) plaster in cement mortar 1:3 (1 cement: 3 fine sand) to

(b)15 mm thick single coat plaster in cement mortar 1:4 (1 Cement: 4 fine

Repairs to damaged/loose/cracked cement plaster/Concrete of R.C.C.

10 /surfaces- The damaged/loose/cracked cement plaster/concrete of Sqm 105.00 649.00 68145.00

any R.C.C. members/ surfaces shall be repaired in following order of

succession/sequences-

Carefully dismantling existing all types of flooring/waII dado like Kota

stone, Marble Mosaic, & glazed tiles etc. along with its bed mortar as

11 per site requirements and disposal of debris outside the building premises Sqm 2140.00 177.00 378780.00

including all leads and lifts etc. complete

as directed by the Engineer In Charge.

Providing and laying 300mm x 300mm, 1st quality ceramic tiles in flooring of

approved shade and make in bath room etc. over a base in 20mm thick (average)

in cement mortar 1:4 (1 cement: 4 coarse sand) in proper line, level & slope

including curing& cleaning etc. all complete as required at site as directed by the

Engineer In charge

Providing and fixing first quality ceramic tiles dado of required height on walls

with 300mm x 600mm, 1st quality ceramic tiles of approved make and shade

with backing plaster of 12mm thick in CM 1: 3 (1 cement: 3 coarse sand) in

proper line and level etc.

Providing and laying first quality polished vitrified floor tiles of size 600mm x 600mm

of approved make & shade laid in floor with 20mm thick or more bed mortar in CM

14 1:4 (1 grey cement : 4 coarse sand) and cement slurry/ paste in backing of Sqm 1586.00 1770.00 2807220.00

tiles laid in proper line and level & slope as required at site as directed

by the Engineer In- Charge.

Providing and fixing 100mm high skirting made from first quality polished

vitrified tiles of approved make & shade with base in 12mm thick in CM 1:4

(1 cement: 4 coarse sand) with cement slurry paste in backing of tiles laid in

proper line and level etc as directed by the Engineer-in-Charge.

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

BOTH SIDES LAMINATE FINISH FLUSH DOOR SHUTTER WITH LOUVER AND

WOODEN DOOR FRAME: Providing and fixing Flush door shutter as per the following

specification & details and Architect approval.

Door Frame: 100mm x 50mm (as per wall thickness) Ivory Coast Teak wood door frame

with 10x50mm Architrave/beading on both sides with Aluminuim foil cover from base to

300 mm above as per detail drawing/Architect instruction made to size and shape as

shown treated with fire retardant and anti termite paint and finish with PU polish/PU paint

of required shade with mitred joints including fixing to rough grounds supports with

threaded expansion bolts as called for providing grooves, architrave's, silicon sealant,

rebates for locks hinges etc. all fixing accessories and incidentals etc. complete as per

detail and Architect approval.

16 Shutter : 32mm thick solid core Flush Door shutter of approved make.

Finish : Cladded with approved shade 1mm thick laminate (to make overall thickness of

shutter as 35mm) including duly polished

Hardware: Door to be completed with approved model & make of SS hardware in

approved finish/shade as follows:

Ball bearing butt hinges size 100x100x3mm, Door closer- Concealed Door Closer (Boxer -

Integrated Cam action Door Closer with hold-open slide arm); Door Handles & lock set:

SS lever solid handles with rosettes & escutcheon, mortise lock sets with strike plate,

Euro Profile Cylinder one side key & other side knob lock; Door Stopper: Floor Mounted

Half moon door stopper Dia 44mm x 32mm in SS with hard rubber insert; SS Towerbolt

Basic rate of Laminate @ INR 75/- per Sqft F.O.R at site excluding GST

16.1 SD2: Single Leaf laminate finish flush door of Size 1000 mm x 2100 mm Nos. 91.00 28500.00 2593500.00

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

BOTH SIDES VENEER FINISH FLUSH DOOR SHUTTER WITH LOUVER AND

WOODEN DOOR FRAME: Providing and fixing Flush door shutter as per the

following specification & details and Architect approval.

Door Frame: 100mm x 50mm (as per wall thickness) Ivory Coast Teak wood door

frame with 10x50mm Architrave/beading on both sides as per detail

drawing/Architect instruction made to size and shape as shown treated with fire

retardant and anti termite paint and finish with PU polish/PU paint of required

shade with mitred joints including fixing to rough grounds supports with threaded

expansion bolts as called for providing grooves, architrave's, silicon sealant,

rebates for locks hinges etc. all fixing accessories and incidentals etc. complete as

per detail and Architect approval.

17 Shutter : 32mm thick solid core Flush Door shutter of approved make.

Finish : Cladded with approved shade 4mm thick Veneer (to make overall

thickness of shutter as 40mm) including duly polished

Hardware: Door to be completed with approved model & make of SS hardware in

approved finish/shade as follows:

Ball bearing butt hinges size 100x100x3mm, Door closer- Concealed Door Closer

(Boxer -Integrated Cam action Door Closer with hold-open slide arm); Door

Handles & lock set: SS lever solid handles with rosettes & escutcheon, mortise

lock sets with strike plate, Profile Cylinder one side key & other side knob lock;

Door Stopper: Floor Mounted Half moon door stopper Dia 44mm x 32mm in SS

with hard rubber insert; SS Towerbolt 200 mm.

17.1 SD2: Single Leaf veneer finish flush door of Size 1000 mm x 2100 mm Nos. 17.00 35400.00 601800.00

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound in 2

18 layers with proper curing , includes preparation of surface, treatment and sealing of SQM 580.00 516.00 299280.00

all joints, corners, junctions of pipes and masonry with polymer mixed slurry as

required at site as directed by the engineer-In Charge.

Supplying and fixing in position the following heavy quality hard ware fittings

& fixtures of approved quality/brand for door/cupboard shutters including

removing of old fittings & fixtures, making grooves, cuttings, necessary

screws, bolts, nuts, washers etc. all complete as required at site as directed by the

Engineer- in-Charge.Note:All the fittings & fixtures shall be got approved,

prior to start of the work.

(i) 300mm ss aldrop Each 17.00 885.00 15045.00

ii)S.S mortice lock set with handle of approve design Each 17.00 2950.00 50150.00

(iii)125 /100mm grip length long ss handle Each 374.00 118.00 44132.00

(iv) 250 mm. long ss tower bolts. Each 68.00 236.00 16048.00

(v) 200mm long ss tower bolts Each 170.00 177.00 30090.00

(vi) 150mm long ss tower bolts. Each 306.00 94.40 28886.40

(vii) 100mm long ss tower bolts Each 68.00 70.80 4814.40

(viii)125mm decorative ss handle for cabinets Each 255.00 118.00 30090.00

(ix) Approved quality door magic eye. Each 17.00 236.00 4012.00

(x) Approved quality Hard buffer Rubber stopper for doors. Each 17.00 88.50 1504.50

(xi) Heavy quality SS door stopper. Each 17.00 177.00 3009.00

(xii) Sliding almirah lock Each 68.00 885.00 60180.00

Providing and fixing 16 mm thick [Avg.] machine cut one side machine

polished Granite stone of approved colour with 20 mm projected outside the

20 vertical supports and fixing the granite slab properly in line, level & slope Sqm 55.00 3540.00 194700.00

etc. to the entire satisfaction of Engineer In Charge.

inclusive of all taxes & delivery at site etc.)

Providing and pasting 40 mm wide granite strip on front face of granite

making moulding, polishing etc all complete ,

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

Providing and fixing hard wood readly available decorative molding of

approved quality between the corner junction of wooden doors/

windows chowkhats and brick plastered masonry walls /coIum n etc. in

22 triangular shape of approved design of size: 25mm x 25mm with nails/ screws Rmt 382.00 118.00 45076.00

etc as per the site requirements and painting the same with a coat of wood

primer and two coats of synthetic enamel paint of approved shade etc. complete

as required and as directed by Engineer In Charge

Providing & fixing in existing W.C./Bath window opening a

powder coated aluminum frame work in tubular section of size 63mm x38mm

with 16 gauge thick as per the approved design in two parts as required to fix

exhaust fan in upper portion and glass shutter in lower portion with ss mosquito

net jail in lower portion from outside. complete as required at site as

directed by the Engineer-in-charge. Approx 33v21 inch.

Carefully dismantling the existing cupboard including brick work and wooden

boards of the cupboards ,repairing the uneven surfaces created etc

and providing & fixing laminated wooden wardrobe of approve design

with sliding shutter. The cupboard is made up of 18mm HDHMR board

on all sides , shelves,shutter , vertical partition and laminated with

.8 mm laminate of white colour on all internal faces and 1.0mm laminate

on outer exposed faces. . Back of wardrobe is finished wih 8mm

prelaminated HDHMR board .Each wardrobe shall also have 2 drawer

with locking arrangement .Shutter of the wardrobe should be sliding with

soft close sliding channel of Hafle make, Rate also include s/f soft close

autoclosing hinges ,s,s conceled handle

, ss.rod etc all complete &

Carefully dismantling of damaged loft shutter and disposal of same

.S/F new loft shutter made up of 18 mm HDHMR board laminated with

approve shade laminate on both faces. Rate also include s/f auto closing

hinges 2 no.in each shutter ,pvc edge bending tape etc all complete

Carefully removing of mosquito net door/ window and removing of

damaged mosquito net jali .S/F new s.s mosquito net jali with required nail

,screw ,moulding etc. Rate also include refixing of door /window after

completion of work all complete

27 Carefully removing of kitchen window with frame L/S 17.00 540.00 9180.00

Three track three panels sliding window with fly proof SS wire mesh (Two nos.

glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm &

sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing

bead of appropriate dimension

Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made

29 of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness Sqm 38.00 10443.75 396862.50

of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension.

Fabricating ,supplying and fixing powder coated aluminium sliding

window with provision of mosquito net shutter and glass shutter with required

size sections i/c cost of glass ,mosquito net .hardware material etc. all

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

Supply & fixing of 18 mm HDMR ply of size 1500 mm X 1200 mm having set top

box holder size 1200 mm X 200 mm placed 100 mm from TV unit. All side with with

31 2mm laminate of approved colour & provision of 6/16 Amp socket at top , Tv sqm 39.50 4697.00 185531.50

cable with switch plate. Two number of 6/16 Amp socket with one control switch

above set top box point

Supplying and fixing looking mirror of 5 mm thick looking glass with bevelled

edges and holes as per site requirement. Rates are inclusive of fixing of glass with

1 SS stud all complete as directed by Engineer Incharge Sqft 450.00 354.00 159300.00

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

Providing and fixing in position quality Towel rod of 24" length with brackets

2 fixed over tiles with rowel plug and approved quality screws including cutting Each 37.00 1652.00 61124.00

and making good the tiles.

Providing and fixing in position Towel ring fixed over tiles with rowel

plug and approved quality screws including cutting and making good

damages of tiles etc. all complete as required at site as directed by the Engineer-in-

Providing and fixing in position Chlorinated Poly Vinyl Chloride (CPVC) pipe

SD-11 of approved make in desired thickness having thermal stability for hot

and cold water supply of including all CPVC plain & brass threaded

approved fittings and fixing the pipe with clamps & screws as per the site

at 1.00 meter C/C etc. all complete.

(a) 20mm nominal dia Rmt 625.00 472.00 295000.00

(b) 40 mm Nominal dia Rmt 90.00 590.00 53100.00

c) 65 mm dia pvc pipe with fitting Rmt 60.00 590.00 35400.00

d)15. mm dia brass ball valve in kitchen shaft No. 20.00 1180.00 23600.00

Supplying and fixing position the following approved make fittings &

fixtures, including carefully removing the existing old/damaged fittings &

fixtures and handing

15mm dia. C.P. Brass Pillar Cock with CP

flange of continental series

(ii) 15 mm dia. C.P. Brass bib cock with nozzle wall CP. flange . Each 19.00 1003.00 19057.00

15 mm dia. C.P angle valve with wall CP. flange of continental series of

Jaquar or other approved equivalent make.

15 mm dia. C.P. Brass central hole single lever wash basin mixer of Jaquar

(iv) Model or other approved equivalent make including plumbing fittings and 450 mm Each 38.00 4720.00 179360.00

long braided hoses etc. all complete as required at site.

15 mm dia. C.P. 4 way high flow single lever divertor with cover plate ,c.p pin .

(v) Including all plumbing fittings& fixtures etc all complete as required at site as Each 38.00 7670.00 291460.00

directed by Engineer-In-Charge.

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

15 mm dia C.P spout of approve design with C.P Handshower and c.p

flexible tube of required length

(vii) C.P Overhead shower 150 X150 mm with 450 mm long C.P Shower Arm No. 38.00 6844.00 260072.00

100mm dia. Heavy quality stainless steel Jali (grating) with or without holes for

(viii) waste pipe of floor / Nahani trap etc all complete as required at site as directed Each 80.00 177.00 14160.00

by Engineer In charge

(ix) Heavy quality CP Soap dish Each 74.00 1062.00 78588.00

15 mm dia .C.P brass two way bib cock with hand shower (health faucet) with

flange etc all complete as required at site as directed by the Engineer-in-Charge.

15 mm dia. C.P brass conceled stop cock with upper body plate, all

complete, as per Engineer-In-Charge.

Providing and fixing glass shelf of as per Engineer-In-Charge including bracket

etc. all complete as directed by Engineer-In-Charge

Providing and fixing table mounted sink mixture all complete, as per

Engineer-In-Charge.

xiv S/F 450 mm long pvc connection Each 160.00 177.00 28320.00

Providing & fixing in position 1st quality vitreous china glazed wall mounted

European WC of standard size with either P trap as per site requirement and

providing & fixing conceled cistern with required material, labour etc i/c cover

plate all complete

Same as above but using extended wall mounted model with

cistern complete set

Providing and fixing in position 100 mm dia. and 75mm outlet pvc

Nahani/ floor trap having seal of 40 mm to 50mm, approved equivalent ISI mark

8 having necessary length of extension pipe wherever required including Each 37.00 885.00 32745.00

cutting of concrete and repairing with concrete after completion all

Supplying and fixing table top square washbasin 40x40 cm with c.p

9 waste coupling and heavy duty waste pipe all complete as required at site as Each 37.00 8850.00 327450.00

directed by Engineer-in-Charge.

Providing and making cast in-situ100mm wide POP Cornice of approved design

junction of ceiling & walls including POP putty and screws etc all complete as

directed by Engineer-In-Charge as required at site.

Providing and making cast in situ pop false ceiling with required g.i

11 frame work ,GI mesh and finishing of same with pop in layers to achieve Sqm 95.00 2950.00 280250.00

proper level /finishing as per site requirement all complete.

Providing and applying pop punning on wall 5 mm thick in proper line and level

with required material ,t&p , labour etc. all complete

Providing and applying pop putty of 2 mm thickness over

13 plastered surface in proper line and level with required Sqm 1186.00 214.00 253804.00

material ,t&p , labour etc. all complete

Carefully removing the existing wash basin along with all accessories & fixing of

1st quality centre hole white vitreous wash hand basin of size: 550 mm x 400 mm

[approx.] with a pair of C.I. / M.S brackets, 32mm dia C.P. waste coupling of

premium quality, connections pipes ,waste pipe etc. including providing and

fixing in position the required length 40 mm diameter CPVC waste pipe

upto existing Nahani Trap etc all complete as required

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

Fabricating ,supplying and fixing Vanity of required size approx 30 x 20 inch

made up of 18 mm HDHMR board ,.8 mm laminate on all internal faces and

1.0mm on shutter with auto closing hinges and fixing of same with fastner etc.

Rate are inclusive of s/f galaxy black granite on top of vanity and

moulding all complete.

Supplying and fixing pvc netlon jali of required size on existing aluminium

16 framework in balconies with Velcro. Rate also include necessary Sqft 1430.00 106.20 151866.00

alteration in the framework with new aluminium section as per site

Supplying and fixing SS Curtain rod on door and windows with required SS

17 bracket. Rate also include s/f end funnels /cap of approve design as per site Rft 645.00 236.00 152220.00

Providing and applying one coat of wall primer and two or more coats of Premium

quality 100% Acrylic Emulsion paint of approved make & shade including applying

additional coats wherever required to achieve even shade and colour as per

the Engineer-In-Charge to the interior surfaces of walls, ceilings, beams,

columns, canopies, staircase, lobbies, etc to get desire shade and finish at all

heights with roller finished etc. all complete as directed by Engineer-In-Charge.

Rates are including removing of existing white or colour wash, dry or oil bound

distemper, acrylic paint etc. by scrapping (both as dry and wet surface),

cleaning & sand papering and preparing the surface by providing and

applying interior wall care putty/POP to get smooth surface.

Providing and applying one coat of wall primer and two or more coats of Premium

exterior emulsion paint & shade including applying additional coats wherever

required to achieve even shade and colour as per the Engineer-In-Charge to

get desire shade and finish at all heights with brush / roller finished etc. all

2 complete as directed by the Engineer-in-Charge. Rates shall include removing Sqm 580.00 152.00 88160.00

of existing white or colour wash, dry or oil bound distemper, acrylic paint etc.

by scrapping (both as dry and wet surface), cleaning & sand papering and

preparing the surface by providing and applying interior wall care putty/P.

O.P to get smooth surface before receiving OBD paint.

Providing and applying two or more coats of 1st quality synthetic enamel paint of

approved make and shade to metal work, viz., grills, shelves, gates, weld-

3 mesh rolling shutters to achive the desired smooth finish etc.all as Sqm 458.00 106.20 48639.60

per specifications including scaffolding, scraping, surface preparation,cleaning

etc. all complete as directed by the Engineer Incharge.

REBATE/SALVAGE VALUE

Rebate for salvage value of removed / dismantlled all unserviceable

materials and taking it away outside the Bank’s Premises as per the prevailing

municipal norms. The unserviceable materials shall means the materials

1 like building materials, wooden materials, hardwares fittings, plumbing & Each 17.00 -15400.00 -261800.00

sanitary fittings, fixtures, GI/CI pipe lines

,electrical wires ,switch board etc removed under all the items of this tender as

directed by the Engineer-In-Charge.

Total Civil Works 23588453.00

Digitally signed by AMIT

Estimate for Interior fit out works of officers flats of SIDBI (14 nos. 2BHK and 3 nos. 3 BHK) at SIDBI

Apartments, Kolkata

S.No. Description of item Unit Qty Rate Amount

ELECTRICAL WORKS

Carefully disconnection and removing all fans, fittings, decorative lights,

1 water purifier, geysers, wires, conduits, casing capping , switch boards/ DB etc. JOB 17.00 5310.00 90270.00

in flat and keeping reusable items like exhaust fans ceiling/wall fans, LED

batten water purifier, geyser etc.

WIRING FOR LIGHT POINT AND EXHAUST FAN POINT

Supply, Laying, testing & Commissioning — Concealed Wiring for Light

Points using three runs of 1.5 sq mm (Red/yellow/blue, Black and green)

wires, 1100 volt grade fire resistant low smoke (FRLS) PVC insulated

stranded copper conductor wire (Neutral, and earth in looping system)

from main switch boards to respective point outlet (inclusive of circuit wiring

using three runs of 2.5 sq mm (Red/yellow/blue (Phase), Black (Neutral)

and green (Earth)) 1100 volts grade stranded copper conductor PVC

insulated fire resistant low smoke FRLS wire from MCB DB to

respective Control switchboards in similar manner) insulation in new approved

make HMS grade PVC conduits and with all required accessories

support to it, by chasing wall/floor and back filling with cement sand

mortar (1:3) and making the good damages as original finish manner and in

PVC casing capping/ PVC conduit where provision of concealed conduits s

not possible as directed by Engineer-In-Charge. There should be suitable

length extra wires in the MS concealed box of switch boards. All the

wires shall be terminated in switches and sockets. There should

not be any joint of wires n switchboard. It comprises of 6 Amp plate

type modular switch mounted on respective make and model mounting

plate and MS concealed /PVC surface box, with interconnection and

also complete outlet points either with angle holder

/ ceiling rose / connector etc. as directed for light point. Each

room should have separate circuit from MCB DB to switch board in respective

rooms, or to be carried out as instructed.

3 Wiring for Ceiling Fan Point

Same as Item No. 02 above but for ceiling fan point along with

supply and fixing of electronic step type hum free fan regulator (4/5 step

socket size with speed marks) as approved by ENGINEER IN No 71.00 1770.00 125670.00

CHARGE, modular type of approved make with 6 Amp modular switch

as specified in Item No 02 and complete with interconnection etc

4 Wiring for half Point on Control switch board

Providing (half-point) wiring using 3 runs of 2.5 sq.mm multi-

stranded copper conductor- FRLS wire for phase, neutral and earth PVC

insulated 1100 volts grade for 6 Amp. universal socket (2 pin + 3 pin) and switch No 215.00 590.00 126850.00

(modular type) to be fixed on same switchboard which is used for light/ fan/

5 Wiring for 16 Amp Plug point — Independent

Wiring for independent 16 Amps plug point with 2.5 sq mm x 3

runs multi stranded copper conductor FRLS wire (from MCBDB to Plug point)

for phase, neutral and earth PVC insulated 1100 volts grade in rigid

PVC conduit of approved size along with accessories to be laid in

concealed manner as specified in Item No. 02 above, along with16 Amp

neon/ LED indicator plate type modular switch and shutter type 6/16

Amp socket mounted separately on suitable size concealed heavy duty MS box

or with PVC board on surface along with covers of approved make.

6 Wiring for Secondary Power Point

Providing secondary wiring/ loop circuit wiring using 3 runs of 2.5 sq.mm

multi-stranded copper conductor- FRLS wire for phase, neutral and

earth PVC insulated 1100 volts grade along with 16 Amp neon/ LED

indicator plate type modular switch and shutter type 6/16 Amp socket No 85.00 1416.00 120360.00

mounted separately on suitable size concealed heavy duty MS box or with

PVC board on surface along with covers of approved make. These 16 Amps

points are to be extended from Independent

16Amp power plug points provided in the flat as directed by Engineer Incharge.

7 Wiring for Group of 2 Nos /3Nos 6Amp Light Plug Point

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

Wiring for independent Group of 2 Nos/3Nos 6 Amps plug point

with 3 x 2.5 sq mm multi stranded copper conductor FRLS wire for phase,

neutral and earth PVC insulated 1100 volts grade in rigid PVC conduit of

approved size along with accessories to be laid in concealed manner as

specified in Item No. 02 above, along with two nos./three no of 6 Amp plate type

modular switches and two nos. of 6 Amp shutter type (2 pin + 3 pin) sockets

mounted separately on suitable size heavy duty concealed MS Box or

PVC board for surface, with covers of approved make. These 6 Amps

points are to be extended from switch-boards provided in each room as

directed by Engineer In Charge

8 Wiring for Call Bell Point

Wiring for bell point as per Item No. 02 above but with

6 Amp modular bell push to be fixed in concealed manner with control-

off switch on switchboard provided in the flat along with supply and No 17.00 1180.00 20060.00

fixing of ding dong bell of approved make with hardware materials, as

approved by ENGINEER IN CHARGE.

9 Wiring for Group of 2 Nos 16Amp Power Point

Wiring for independent Group of 2 Nos 16 Amps plug point with 3

x 2.5 sq mm multi stranded copper conductor FRLS wire for phase,

neutral and earth PVC insulated 1100 volts grade in rigid PVC conduit of

approved size along with accessories to be laid in concealed manner as

specified in Item No. 02 above, along with two nos. of 16 Amp modular No 37.00 2950.00 109150.00

switch and two nos. of 16 Amp shutter type 6/16 Amp (2 pin + 3

pin) sockets mounted separately on suitable size heavy duty concealed MS Box

or PVC board for surface, with covers of approved make. These 6 Amps

points are to be extended from MCBDB as directed by Engineer In Charge.

10 Wiring for Group of 06 Amp + 16 Amp Power Point

Wiring for Group of one 6 Amp light plug Point and one 16 Amp power plug

point, which means one no. of 16 Amp neon/LED lamp indicator plate type

modular switch and one no. of 6 Amp switch mounted on respective make and

model mounting plate and MS concealed /PVC surface box installed in the line

of switch board on platform in the kitchen; and another set of one no. of 6

Amp socket and 6/16 Amp socket mounted on respective make and model No 108.00 2596.00 280368.00

mounting plate and MS concealed /PVC surface box installed near to

geyser and water purifier in the kitchen, 3 nos. 2.5 sq. mm

interconnecting copper conductor PVC FRLS insulated wire for

switch/ socket and in new HMS grade PVC conduit in concealed

manner as stated in scope of work, as directed by Engineer In Charge

11 Cable TV Wiring

One point Consisting of TV coaxial socket plate mounted on

respective make and model required size separate mounting plate and MS

concealed box and RG6 copper coaxial cable in new HMS grade

PVC conduits starting from outside/balcony and ending at TV socket

outlet points in living room/ bedroom of individual flat as stated in No 54.00 1239.00 66906.00

detailed scope of work. Common conduit as per Sr No. 10 can be used for

laying of TV cable from outside/balcony to TV socket on switchboards

with 1 meter loose cable at outside end for connections to be done later,

using all accessories as per Item No. 02

12 Supplying ,Fixing, testing and commissioning of following Electrical items

with necessary hardware

SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light

on new white colour square PVC block and using two/three core

copper conductor PVC insulated preferably white colourcable from tube No 71.00 1180.00 83780.00

light fixture to ceiling rose as directed by

Engineer In Charge.

SITC of 48 inch Ceiling fan of approve shade with all

14 necessary mounting accessories including BLDC motor to provide 3 mm thick No 71.00 3840.00 272640.00

Bakelite round plate with required hardware near the ceiling fan hook.

PVC exhaust fan of 200MM size with pvc louver protection complete

with required fittings and hardware etc. and using two/three core copper

15 conductor PVC insulated preferably white colourcable from exhaust fan to No 54.00 1652.00 89208.00

ceiling rose as directed by Engineer In

SITC of 25 litre horizontal geyser i/c all necessary hardware

material etc .all complete.

Digitally signed by AMIT

S.No. Description of item Unit Qty Rate Amount

SITC of gyeser 3L with all accessories as complete for connection Each 17.00 5021.00

18 15 watt LED PANEL

SITC of 15 watt LED panel light at entrance, balconies and kitchen

both surface and conceled type i/c connection and testing complete.

SITC OF 18/20 Watt LED panel light on ceiling with required

hardware material all complete (Dinning room) as per Engineer-In-Charge

SITC of cabin fan 12 inch size on ceiling with required material

21 SITC of fancy fittings/lamps/wall decorative lights of approve make No 108.00 5900.00 637200.00

22 LED tube light

10 Watt 2 ft led fitting, White Colour No 71.00 354.00 25134.00

23 MCB Distribution Box

SITC of 3 phase 4 way TPN double door (plain metallic) MCBDB in

concealed manner inside the flat as directed by Engineer-In-Charge with

below mentioned MCBs and required black off, mortar and hardware for

installation of MCBDB. This work is carried out after removing of existing

concealed MCBDB/ fuse DB.

C Curve 63A 4 Pole MCB — 01 No. and SPMCB 20 Amp — 08 Nos., SPMCB

Total Electrical Works 4386281.00

Digitally signed by AMIT

Estimate for Interior fit out works of officers flats of SIDBI (14 nos. 2BHK and 3 nos. 3 BHK) at SIDBI

Apartments, Kolkata

S.No. Description of item Unit Qty Rate Amount

MODULAR KITCHEN WORK

Providing and fixing modular kitchen units for the kitchen platform

and top wall units to be fabricated by using HDHMR board of thickness

18 mm for making cabinets of required sizes to match with the sizes

A SS kitchen jali units and size of the SS sink as per following details :-

Front bottom , top sides and shelf partitions of the

modular cabinets shall be of 18 mm thick HDHMR boards of Mls

Green panel Industries or approved equivalent and back portion shall be

of 8 mm thick HDHMR board or approved equivalent with necessary fittings ,

screws , pasting materials, finishing all exposed cut surfaces with self

adhesive PVC tape in matching shade as that of laminate . The shutters and

the pull out units shall be fixed 50 mm above the kitchen floor level . All the

inner portions of the cabinets shall be finished with 0.8 mm thick laminate

of white colour and approve make..The front face of the cabinet shall

be finished with1.0 mm ultra gloss laminate shade 21162 MR+ &

21069 MR+. The fittings like handles , telescopic channels SS

baskets , auto closing hinges shall be paid separately under

respective items below . Quoted rates shall be inclusive of labour ,

materials wastage scaffolding fixing arrangements of top and

bottom units with necessary dash fasteners , repairing the damages,

shifting the debris out of colony , CP , taxes etc all as required for the

execution of the work . Note :- Only front elevation area shall be measured for

payment purpose.

1 Below platform units of depth 610 mm approx , Sqm 65.85 29500.00 1942575.00

2 Top wall units of depth 300 mm approx. with shelves Sqm 54.24 21240.00 1152057.60

Providing and fixing stainless steel baskets and other

B fittings , accesories of modular kitchen of as per below mentioned details :-

1 SS 304 cutlery baskets 15 x20 x4 inch Each 17.00 2950.00 50150.00

2 SS 304 Plain basket 15 x20 x6 inch Each 17.00 3540.00 60180.00

3 SS 304 thali basket 15 x20 x8 inch Each 17.00 5310.00 90270.00

4 SS 304 plain baskets 19 x20 x4 inch Each 51.00 3540.00 180540.00

5 SS 304 plain basket 19 x20 x 6 inch Each 17.00 4130.00 70210.00

6 SS 304 plain basket 19x 20 x8 inch Each 34.00 4720.00 160480.00

7 SS baskets S —Corner basket Each 17.00 9440.00 160480.00

8 SS detergent pullout Each 17.00 2360.00 40120.00

9 SS dustbin ring Each 17.00 1770.00 30090.00

10 Bottle Pull out basket set of width 9" with standard depth pair 17.00 8850.00 150450.00

11 SS Handle 12 inch design as per Engineer-In-Charge No 289.00 590.00 170510.00

SS auto close hinges soft close of all variety as per Engineer-In-Charge

13 Telescopic channels 20 " size as per Engineer-In-Charge Pair 306.00 885.00 270810.00

S/F Chimney 600 mm wide with vent pipe make as per Engineer-In-

S/F granite kitchen sink 36 x18 x8 with drain board as per

15 Engineer-In-Charge

Total Modular Kitchen Works 5584078.60

Digitally signed by AMIT