COMPREHENSIVE REPAIR AND MAINT TO BLDG NO P-25, P25A, P-25B, P-25C OF ECPU COMPLEX P-158 OF IFSU COMPLEX, P-157, P-159, P-160 AND P-161 OF ECIB COMPLEX T-465, T-466 AND BI-28 OF ECSR COMPLEX T-540 OF ECHS COMPLEX UNDER GE (FW) KOLKATA

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.

Taking down shutter and re-fixing in the same opening after necessary repair like easing etc. area exc 1 sqm but not exceeding 2 sqm each completed all as specified and directed.

S&F for 2nd class Hardwood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed.

S&F 35mm thick Factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed.

S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated.

S&F in repair 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed.

S&F anodised powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates including necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified.

S&F powder coated anodised Anodised aluminium window and ventilator shutters, fixed type without sash bar in two or three track window or in fixed type ventilator , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangement for both sliding shutter etc with 4.80 mm thick glass ordinary quality. complete all as specified.(NOTE: Glass and wire mesh shall be paid separately )

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, in each door, anodised aluminium snap beading screws etc with 4.80 mm thick glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Glass shall be paid separately )

S&F in repair Mortice latch lock with two levers (vertical type), mild steel body and fixed in aluminium door complete all as specified and as directed.

S&F in repair Anodied aluminium grill ( anodised transparent or dyed to required to IS: 1868 with minimum anodic of coating of grade AC15) of approved design /pattern with approved standard section and fixed to the existing window frame with C.P proper opening size for fixing and operation of handles and fixing proper opening size for fixing and operations of handles and fixing approved aluminium standard section around the opening all complete as all as per requirement and direction of engineer in charge.

S&F stainless steel wire cloth, 0.65 mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

All as per Ser Item No 18 here-in-before, but fixed in repair.

Hacking out old broken glass (any thickness and size or quality) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.

All as per Ser Item No 20 here-in-before, but from metal frame.

S&F 3mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section.

All as per Ser Item No 23 here-in-before, but 200mm long all as directed.

S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.

All as per Ser Item No 25 here-in-before, but fixed in repair.

S&F 100mm butt hinges stainless steel medium weight complete all as specified and as directed.

All as per Ser Item No 27 here-in-before, but 75mm.

S&F aluminium handle, cast type anodised 125mm size all as directed.

All as per Ser Item No 29 here-in-before, but 150mm.

S&F 25 mm dia brass decorative type curtain rod alongwith and supports and rings at a gap of 4" complete all as specified and directed.

S&F Brass decorative bracket for fixing curtain rod fixed to wall with screw, nails etc complete all as specified and directed.

S&F 1mm to 2mm thick sunmica fixing to ply wood all as specified and as directed by Engineer-in-Charge.

S&F in repair 12 mm thick commercial type face plywood BWR grade type BB fixed with screws/nails to timber frame work all as specified.

S&F in repair 18-19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed with screws/nails to timber frame work all as specified.

S&F Block boards 18 to 19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one.

S&F in repairs Door closer hydrau- locally regulated ( Aluminium extruded section) designation No. 2 universal type, suitable for door shutters of upto 851 mm in width and of weight between 36 to 61 Kgs complete all as specified and directed.

S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer all as directed.

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other part made of mild steel heavy duty all as directed including taking down old one.

S&F in repair for 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as directed.

S&F in repair of 2 mm thick fibre glass reinforced translucent corrugated or plain coloured/printed sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as directed.

M&L in repair 18 to 20 mm thick black/coloured granite machine cut laid over 10mm thick screed bed and jointed with grey or coloured cement to match with admixture of pigment to match the shade of granite including cutting polishing all as specified and as directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick below or above GL complete un re-enforced all as specified and directed.

M&L for 75mm thick PCC(1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and smooth without using extra cement complete all as directed..

M&L for 25mm thick PCC(1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in floor padding finished fair and even without using extra cement complete all as a specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as a specified and as directed

S&F Steel Tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as a specified and as directed

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs ( framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as directed by Engr-in-Charge.

Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering.

S&F pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of brick work built in cement mortar including all quoins arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed.

M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.

M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as directed.

M&L 15 mm thick cement plaster in CM (1:4) on fair faces of brick work incl finished even and smooth without using extra cement complete all as a specified and as directed

M&L 5 mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:3 including necessary scaffolding complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors / vertical surfaces, including screed bed on floor / backing layer of screed on vertical surface etc laid, bedded and pointed in any mortar, etc complete all as specified and directed by Engineer-in-charge.

S&F Non skid ceramic tiles 400x400x7to 8 mm thick coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed (conforming to IS) complete all as a specified and as directed

S&F Non skid ceramic tiles 600x600x7 to 8 mm thick coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed (conforming to IS) complete all as a specified and as directed

S&F glazed ceramic colour tile of size 300 x 200x 6 to 7 / 350x 250x 7 / 450 x 300 x7 mm thick as in skirting and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing layer bed of 10 mm thick CM(1:6) complete all as a specified and as directed

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.06Sqm buy n. exc 0.11 sqm (300X300X7-8mm),as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:6 complete all as a specified and as directed

M & L Vitrified colour (light shade) Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed (conforming to IS)complete all as a specified and as directed.

S&F in repair Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions including taking down old tarfelt, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, finished even and smooth and cured for 07 days by Ponding of water over Roof. (b) Preparing fully dried plastered surface as per IS:3067-1966, for further treatment. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.3 Litre per Sqm. (d) Applying a layer of APP based Polymeric Membrane; 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (e) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.

M & L 25mm thick cement concrete as in roof padding type B-0,1:2:4 (12.5mm graded aggregate finished cement concrete surface even and smooth without using extra cement complete all as a specified and as directed

Supply only liquid water proofing compound complete all as a specified and as directed

S&F in repair False ceiling 'E' board "Classic", reinforced, designer series, board with HPSC of size 595 mm x 595 mm x 4 mm thick fixed on existing aluminium snap grid to support the boards/files complete all as a specified and as directed

S&F in repair floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed in floor 150mm overall length of cover plate complete all as a specified and as directed

S&F Chromium plated brass Pillar tap fixed to wash hand basin, as in repair etc. complete all as specified and as directed.

S&F fancy type chromium plated Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed.

S&F in repair fancy type CP wall mixer 3 in-1 with provision for over head shower & telephonic shower arrangement screwed for iron pipe including taking down old and all as specified.(Make : Jaquar Cat No. KUP-35125PM or equivalent make specified in tender.

S&F in repair CONCEALED stop cock with flange CP for 15mm bore pipe all as specified.

S&F corner glass shelf ( Make : Jaquar cat No ACN.-1173 or equivalent make in list of EC) incl taking down old one complete all as a specified and as directed.( Make : Jaquar cat No ACN.-1173 or equivalent make specified in tender.

S&F in repair 125mm dia brass chromium plated shower rose with or without swivel joints for fixing with 15mm bore pipe etc complete all as directed.

S&F in repair central hole basin mixer cast copper alloy chromium plated screwed down for iron pipes etc complete incl taking down old one all as directed

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed.

S&F in repair CP tubular Towel rail 600mm long and 20mm dia with chromium plated brass screws and wooden/plastic cleats complete all as directed.

S&F in repairs for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete including taking down old one.complete all as specified and as directed.

S&F in repairs for sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete including taking down old one complete all as specified and as directed.

S&F in repair stainless steel kitchen rack of size 30"x24"x10" including taking down old one. complete all as specified and as directed.

S&F in repair CP grating 100mm size fixed with white cement complete all as directed.

S&F for bath room cabinet mirror size not less than 450 x 600mm all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore angular stop cock chromium plated cast copper alloy with wall flange concealed type screwed for iron pipe etc complete all as specified and directed

S&F in repair PVC connection 450mm long fixed with 15mm GI pipe complete all as specified and directed .

All as per Ser Item No 86 here-in-before but 600mm long.

S&F in repair PVC waste pipe 32mm dia for WHB / kitchen sink fixed complete all as specified and directed.

S&F Coloured cascade type seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed by Engineer-in-charge.

S&F Coloured (any) PVC seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed by Engineer-in-charge. MAKE: Parryware, cat no C 8071or equivalent make specified in tender.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by Engineer-in-charge..

S&F in repair CP towel ring of size 150 mm decorative type etc fixed with walls complete all as specified and directed( Make: Cera - Cat part No- F5015105CH) or equivalent make specified in tender.

S&F in repair CP Jet spray with CP flexible cord incl wall hook complete all as specified and directed

S&F in repair CP bottle trap with internal portion 32mm size with 250mm long wall connection pipe complete all as specified and directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repair PVC flushing cistern 9 to10ltrs capacity fixed with GI pipe incl all fittings with PVC down pipe complete all as specified and directed.

Repair only to flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.

Repair only to cascade type flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.

S&F in repair floor mounted vitreous china, white wash down water closet pan (pedestal pattern of make : Parryware model No.C-0278/0297 or equivalent model of make "Hindware") with "p" or "s" trap front or back inlet fixing bolts only. (Make : parryware model No C-8090 or equivalent model of make Hindware matching with water closet colour with inlet ball valve float handle fixed with cast ikron bracket of suitable size) and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cove (coloured) fixed with mild steel chromium plated or aluminium hinging device e, in proper position including making all necessary connections with flushing cistern, flush pipe, anti syphoonage pipe etc complete all as specified and directed.

Taking up or down steel water tubing 15 mm bore incl connection , cleaning etc complete all as specified and directed.

All as per Ser Item No 100 here-in-before, but 20 mm bore

All as per Ser Item No 100 here-in-before but 25mm bore.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.

All as per Ser Item No 103 here-in-before, but 20mm bore.

All as per Ser Item No 104 here-in-before but 25mm bore.

S&F in repair of 1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) hoisted and fixed in position including suitable float valve fixed with GI pipe complete all as specified and directed.

All as per Ser Item No 106 here-in-before but 2000 ltrs capacity.

All as per Ser Item No 106 here-in-before, but 500 ltrs capacity.

S&F in repair 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair CP 32 mm waste coupling for stainless steel sink complete all as specified and directed.

S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout left hand knob operating screwed for iron pipe etc complete all as directed.

S&F in repair Vitreous china wash hand basin white, flat back, size 550X400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. Charge.

S&F in repair 15mm dia shower health faucet chromium plated with 01 meter long flexible tube and suitable wall hook complete all as specified and directed. (Make : JAQUAR Cat No. ALD 587 and CERA cat No- F8030102 (chrome) or equivalent make specified in tender.

M&L for vitreous china squatting pan, 'Orissa' pattern of size 580mm x 440mm white with integral foor rests (excluding flushing cistern and flush pipe) with and including trap and connection to trap, flushing pipe and necessary concrete work complete all as directed.

S&F in repair PVC tank cover for 500 Ltrs PVC Tank complete all as specified and directed.

S&F in repair PVC tank cover for 1000 Ltrs PVC Tank complete all as specified and directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, from ground floor to third floor complete all as specified and directed.

Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100 mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(upto 4 the storey).

Material and labour of CI (spun) Bends (any radious) complete all as specified and directed (upto 4stoery)

Material and labour of CI spun Cowl for 100 mm bore pipe. (upto 4stoery)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed..

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking down plants/vegetation from wall upto roof level by means of cutting holes into brick wall and making good the surfaces of dismantling portion n.exc 150Sqcm superficial area and n.exc on brick deep by PCC 1:3:6 type C1 , and plastering in CM (1:4) of disturb portion and applying two coats of cement based paint to match the existing surfaces height upto 4th floor and complete all as directed by Engr-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.(Up to 0-4 floor Height)

Material & Labour preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surface of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for any height of the building complete all as specified and directed.

Material & Labour for complete removal of existing treatment applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.(Up to 0-4 floor Height)

M&L for applying one coat of synthetic enamel paint on old Painted wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for applying one coat of synthetic enamel paint on old Painted steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for applying one or more coat of French polish on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for applying two or more coat of french polish including preparing, cleaning the new surface and applying wood filler on new wooden surfaces of any description over 10cm width or girth complete all as directed by Engineer-in-Charge.

M&L complete Removal of existing treatment and applying two coat of plastic emulsion paint over a coat of primer to old decorated surfaces of wall over 2mm thick wall care putty including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L complete Removal of existing treatment and applying two coat of plastic emulsion paint over a coat of primer to old decorated surfaces of ceiling over 2mm thick wall care putty including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L preparing old painted surface and applying one coat of plastic emulsion paint to old decorated surfaces wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L preparing old painted surface and applying one coat of plastic emulsion paint to old decorated surfaces of ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coat of oil emulsion distemper to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coat of oil emulsion distemper to old decorated surfaces of ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two or more coats of oil emulsion distemper over one coat of primer and over a coat of putty (2 mm thick) to old decorated surfaces of wall complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two or more coats of oil emulsion distemper over one coat of primer over a coat of putty (2mm thick) to old decorated surfaces of ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer over a coat of putty (2 mm thick) all as specied and as directed by Engineer-in-Charge.

M&L Preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of over a coat of putty (2 mm thick) primer all as specied and as directed by Engineer-in-Charge.

M&L applying two coat of plastic emulsion paint over a coat of primer to new plastered surfaces of wall over 2mm thick wall care putty including preparation surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L applying two coat of plastic emulsion paint over a coat of primer to new plastered surfaces of ceiling over 2mm thick wall care putty including preparation surfaces complete all as specified and as directed by Engineer-in-Charge.

Preparing new surface of wood or wood based material of any description and in any position not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M&L Preparing old Surfaces of Walls and applying one Coats of Cement Base Paint, complete all as specified and as directed.

M&L Preparing new Surfaces of wall and applying Two coats Cement base paint complete all as specified and as directed.

M&L for repair to steel window including welding, binding of steel section, repair to hinges, fixing of stay and handles etc n.exc 1.5 sqm

All as per Ser Item No 149 here-in-before, area exc 1.5sqm but n.exc 4.00sqm

S&F in repair 2 lever brass lock, cupboard grade 1, 50mm size all as spd.

S&F in repair 6 lever brass type Mortice lock vertical type size 65 mm all as spd.

Disconnecting exiting water storage Tank of capacity exceeding 1000 lt but not exceeding 2000liters for cleaning of water tank, removing of mud sludge etc and flushing with chlorine water including supply and fixing of any damage accessories for water Tank and writting MES No Unit Name (With carital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re connecting and refixing all connections complete all as directed by the Engg- in- Charge.

Disconnecting exiting water storage Tank of capacity exceeding 500 lt but not exceeding 1000liters for cleaning of water tank, removing of mud sludge etc and flushing with chlorine water including supply and fixing of any damage accessories for water Tank and writting MES No Unit Name (With carital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re connecting and refixing all connections complete all as directed by the Engg- in- Charge.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minimum weight 20gms-210gms) complete all as specified and directed.

S&F in repair 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minimum weight 20gms-210gms) complete all as specified and directed.

S&F 15mm bore chromium plated two way bib cock with flange as directed by Engineer -in-charge.

M&L for repair small repair of hinges for door and window, adjustable for sliding door bolts, tower bolts, repair of handles, mortice locks etc for similar type of works complete all as directed by Engr-in-charge (rate incl welding where ever reqd)

M & L Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 900mm x 600 mm as in drain cover with capacity 3MT.

M & L Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capacity 3MT.

Relaying paver block in patches, including removing and cleaning old paver block, preparing beds and laying or setting, jointing new or old paver blocks complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with gray cement and pavement complete all as specified and as directed.

M&L Sand filling under floors under paver block including watering and consolidation complete all as specified and as directed.

M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

E/M Portion Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring surface type with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and capping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :-

One light/fan point controlled by one, one way switch.

One bell point controlled by one push button switch.

One 3 Pin 5 Amps socket out let point on independent board.

One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switches.

All as per item 169 above here-in-before but using 4.0 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specified/directed.

Supply and fixing of bell push piano flush type one way 240 Volts 5 Amps all as specified/directed.

Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.

Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/ directed.

Supply and fixing in repairs of bell electric, 240 Volts, single pole complete all as specified and directed.

Supply & fixing in repairs of ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 volts as specified/directed.

Supply and fixing in repairs of Bulb holder angular PVC/ Polycarbonate suitable for batten fittings complete all as specified/directed.

Supply and fixing in repairs of ceiling rose surface PVC/ Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.

Taking down and refixing the same fixture i.e light fittings, ceiling fans, bulbs etc along with connected items complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Magic Cat No BWMP020W or equivalent make as per list of EC.

Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Magic Cat No BWMP010W or equivalent make specified in tender.

S & F in Replacement for fittings with twin core PVC insulated and overall PVC sheathed cable with stranded aluminium conductor 1100 volts grade of size 4 sqmm including taking down old unserviceable wiring complete all as specified and directed.

Supply and fixing in repair of switch piano flush type 240 Volts 5 Amps, SP, one way, fix in repair including taking down old unsv complete all as specified/directed.

Supply and fixing in repair of bell push piano flush type one way 240 Volts 5 Amps, fix in repair including taking down old unsv complete all as specified/directed.

Supply and fixing in repair of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) ,fix in repair including taking down old unsv complete all as specified/ directed.

Supply & fixing in repair of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered),fix in repair including taking down old unsv complete all as specified / directed.

Supply and fixing in repair of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), fix in repair including taking down old unsv complete all as specified/directed.

Supply & fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet including taking down old unsv complete all as specified and directed.

Supply and fixing in repair of bell electric, 240 Volts, single pole, fix in repair including taking down old unsv complete all as specified and directed.

Supply and fixing in repair of Bulb holder angular PVC/Polycarbonate suitable for batten fittings, fix in repair including taking down old unsv complete all as specified/directed.

Material and labour for modular concealed point wiring modular type for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including making good all disturbed surfaces to match the existing complete all as specified and directed as below :-

One light/fan point controlled by one, one way switch.

One bell point controlled by one push button switch.

One 3 Pin 5 Amps socket out let point on independent board.

One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switches.

All as per item 192 above here-in-before but using 4.00 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.

S&F in Modular switch 1 way 6A,1 module complete all as specified/ directed.

S&F in Modular switch 1 way 16A,1 module complete all as specified/ directed.

S&F in Modular bell push 1 way 5A,1 module complete all as specified/ directed.

S&F in burger ding dong type complete all as specified/ directed.

S&F in Modular Socket, 6A - 2/3 pin combined 2 module, Make- Honeywell MK wraparound, Havells

S&F in Modular Socket, 6/16A - 2/3 pin combined 2 module, Make- Honeywell MK wraparound

S&F Fan step regulator, 120W - 2 module complete all as specified/ directed.

S&F White cover plate with frame, 1/2 module complete all as specified/ directed.

S&F White cover plate with frame, 3 module complete all as specified/ directed.

S&F White cover plate with frame, 4 module complete all as specified/ directed.

S&F White cover plate with frame, 6 module complete all as specified/ directed.

S&F White cover plate with frame, 8 module complete all as specified/ directed.

S&F White cover plate with frame, 12 module complete all as specified/ directed.

S&F Metal flush box 3 module complete all as specified/ directed.

S&F Metal flush box 4 module complete all as specified/ directed.

S&F Metal flush box 6 module complete all as specified/ directed.

S&F metal flush box, 8 module complete all as specified/ directed.

S&F metal flush box, 12 module complete all as specified/ directed.

S&F in repair Modular switch 1 way 6A,1 module complete all as specified/ directed.

S&F in repair Modular switch 1 way 16A,1 module complete all as specified/ directed.

S&F in repair Modular switch 2 way 6A,1 module complete all as specified/ directed.

S&F in repair Modular bell push 1 way 5A,1 module complete all as specified/ directed.

S&F in repair modular ding dong type complete all as specified/ directed.

S&F in repair Modular Socket, 6A - 2/3 pin combined 2 module, Make- As per site

S&F in repair Modular Socket, 6/16A - 2/3 pin combined 2 module, Make- As per site

S&F Fan step regulator, 120W - 2 module complete all as specified/ directed.

S&F Fan capacitors 2.5 mfd complete all as specified/ directed.

Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete incl taking down old unsv all as specified and directed by Engr-in-charge.

Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 incl taking down old unsv complete all as specified and directed by Engr-in-charge.

S & F in replacement of VTPN MCCB 160 A DB Double Door, 08 way, IP 53 protection with Door earthing and mechanical impact strength IK 08 complete as directed by engr in charge. Make Legrand Cat Part No: 5077 50 or equivalent make specified in tender.

All as per item no MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed by .

Supply & fixing in repair of MCB Isolator 4 pole, 100 Amps 'B' Series 10 KA 415 volts incl taking down old unsv complete all as specified/directed.

Supply & fixing in repair of MCB TPN 63 Amps 'B' Series 10 KA 415 volts incl taking down old unsv complete all as specified/directed.

Supply & fixing in repair of MCB SPN 40 Amps 'B' Series 10 KA 240 volts incl taking down old unsv complete all as specified/directed.

Supply & fixing in repair of MCB SP 6-32 Amps 'B' Series 10 KA, 240 volts incl taking down old unsv complete all as specified/directed.

Supply and fixing in repair of single Pole & Neutral enclosure with 2 pin and earth plug & socket for incorporating with single pole 20 Amp SP MCB all as complete including taking down old unsv one and directed by the Engineer-in-charge.

Supply and fixing in repair of AC short circuit protection motor starter 25 Amps capacity, 230 Volt with MCB DP 25 Amps, plug top & socket complete 6 M including taking down old unsv complete all as specified and directed.

Supply and fixing in repair LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Magic Cat No BWMP020W or equivalent make specified in tender.

Supply and fixing in repair LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Magic Cat No BWMP010W or equivalent make specified in tender.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 wat, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete Make Bajaj or equivalent make as per list of EC

S & Fix Energy efficient light fitting (LED ) Sleek type of capacity 36 W fitting 4FT with extruded Aluminium Hosuing Lamps, driver, connector etc incl hanging/Fixing arrangement with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting through suitable size flexible PVC pipe making good to wall for old fitting including taking down old fitting of complete all as specified and directed. Make Philips Model No 581951 36 W or equivalent make specified in tender.

Supply and fixed in repair PVC terminal Rectangular boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc of size 100mmx100mmx50mm deep depends on the no of switch and socket complete all as specified and directed.

S&F of casing capping of 20/25 mm size including pin and clip complete all as specified and directed.

S&F of 20/25 mm conduit MMS complete all as specified and directed.

S&F of single core wire of 6.00 sqmm sheathed complete all as specified and directed.

S&F of single core wire of 10.00 sqmm sheathed complete all as specified and directed.

S&F of Weather proof flat twin core copper cable of size 4.00 sqmm complete all as specified and directed.

S&F of Weather proof flat twin core copper cable of size 1.5 sqmm complete all as specified and directed.

S&F PVC flexible pipes from along with saddles from ceiling rose to connector fittings complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

P N GUPTA AND SONS (BID ID -3482296)

JOY-EN-JOY (BID ID -3484454)

UNIVERSAL TRADING CENTRE (BID ID -3483582)

DEB AND COMPANY (BID ID -3480836)

MS HORIZEN (BID ID -3483876)

PRABIR TRADERS (BID ID -3481720)