REPAIR TO SEWAGE LINE CLEANING AND DESLUGING OF SEPTIC TANK, SOAKAGE WELL AND MANHOLES AND ETC IN MD ACCN IN AOR OF AGE BR-I UNDER GE (W) PATHANKOT

To attend and rectify of sewage system complaint by opening manholes cover in daily routine basis as per complaint lodged by user at complaint cell of AGE B/R-I Sub division by deploying manpower by cleaning,removal blockage of RCC/UPVC/PVC/SGSW/CI sewage pipe line of size 75/100/150/160/200 /300mm bore including connected both side manholes in any size & depth(0.60 Mtr to 6.00 Mtr) by desluding,dewatering,taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid /bricks/stone bats/debris or any items etc from sewage line & both side manhole, including flushing sewage line & manholes with water adequate water as to make the fully functional line with manhole,re-fixing opened access cover and removing all retrieved material outside the periphery of defence land at his own cost

All as per srl item No. 2 here-in-before but sewage line & both side manhole by Mechanically only with using sewage tankers/ Truck mounted hydraulic jet pressure machine with heavy duty flushing & suctioning pump. Note:- bidder quioted rate is included for sewage pipe line including both side manholes cleared ,cleaned,blockage removed under this item is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repetitive cleaning if required as directed by engineer-in-charge.bidder quioted rate is included for this aspect.

Cleaning of septic tanks of any size,capacity & depth by Mechanically only with using sewage tankers/ Truck mounted hydraulic jet pressure machine with heavy duty flushing the sewage line and with heavy duty sewage pumps sewage suction pump,by desluding,dewatering,taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid /bricks/stone bats/debris or any unwanted items etc,including flushing with adequate water to make the fully functional,re-fixing opened access cover and removing all retrieved material outside the periphery of defence land.Note :- The measurement for the quantity of sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface sludge on measuring rod for payment purpose.

M&L for Dewatering/pumping/Bailing out of soak well/filter bed at different locations completely of size not exc 4.80 mtr dia and not exc 6.5 mtr depth Mechanically only with using sewage tankers/ Truck mounted hydraulic jet pressure machine with heavy duty flushing system and with heavy duty sewage pumps sewage suction pump including taking out/removing all material such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /night soil waste etc by only sewage suction pipe including flushing with adequate water to make the same sewage system fully functional , re-fixing the existing opened access cover and removing all retrieved material/unwanted/foreign material outside the periphery of defence land at his own cost. Note:- bidder quioted rate is included for soak well/filter bed cleared ,cleaned,under this item is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repetitive cleaning if required as directed by engineer-in-charge.bidder quioted rate is included for this aspect.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil. Note:-(1) The excavation work will be carried out by manually or mechanical means in any location/ area as directed by Engr-in- charge. (2) Any damage occur to water supply pipe line/electric cable etc during excavation work will be make good up to satisfaction of Engr- in-charge without any extra cost to the govt.

All as per srl item no 06 here-in-before but depth exc 1.50 m and not exc 3.00 meters.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm with any type of soil.

Removing excavated Soils material exc. 250m but n exc. 500 m and depositing where directed

M&L for unplasted drainage pipe 150/160mm dia type "B" with wall thickness 4mm(min) of pressure rating 8 KN/sqm laid in trenches and jointed with cement solvent including testing complete including demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 150/160 mm internal dia laid in trenches including testing complete including demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 100 mm internal dia laid in trenches including testing complete including demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L for Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for Bore of pipe in 100/160mm complete all as specified and directed

M&L for Cutting into existing manholes for connection new drains making good to pipes and rendering, cutting out existing benching for and forming branch channel in cement mortar 1:2:4 type B-1, smooth finished and reforming benching as required 150 mm dia pipe complete all as specified and as directed.

M&L for Cutting into existing manholes for connection new drains making good to pipes and rendering, cutting out existing benching for and forming branch channel in cement mortar 1:2:4 type B-1, smooth finished and reforming benching as required 100 mm dia pipe complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required Internal dia of pipe in 75mm/100mm complete all as specified and directed

S&F spun Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, fixed to walls bore of pipe in 100mm complete all as specified and directed

All as per srl item no 18 here-in-before but 75mm bore

M&L for Cast iron bends (ISI marked) (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 100mm, complete all as specified and directed

All as per srl item no 20 here-in-before but 75mm bore

Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar, and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

All as per srl item no 23 here-in-before but 110mm bore

Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

All as per srl item no 26 here-in-before but 110mm bore

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch piece (Double `Y') equal or unequal with access door.

S&F 75 mm bore PVC (SWR) branch piece (Double `Y') equal or unequal with access door.

S&F 110 mm bore PVC (SWR) Vent Cowl

S&F 75 mm bore PVC (SWR) Vent Cowl

S&F in repair 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc. complete to walls, ceilings or in floors etc.

S&F in repair for 75mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

S&F in repair for 100 mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

M&L Non abrasive paving cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface/tiles complete all as specified and as directed. Note:-The texture , colour, size ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE.

S&F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair for vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.

S&F in repair for Vitreous China bowl urinal flat back, size of half stal white (minimum) with grating,waste pipe and union for discharge pipe ,white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repair for Brass chromium plated angular stop cock with wall flange screwed for 15mm dia bore iron pipe complete all as specified and directed Make:Jaquar CAT NO -CON-059KN1 or equivalent in any of the make mentioned in list of product.

S&F in repair for 15mm dia PVC connections 600mm long with PTMT nuts complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old PVC/RCC water tanks complete all as specified.

All as per srl item No 44 here-in-before but water storage tanks of 1000 ltrs capacity

S&F in repair for Brass CP Urinal spreader 15mm dia pipe complete all as specified

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site.

S&F Factory made solid PVC door heat moulded frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as specified and directed.

S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

S&F butt hinges med weight cold rolled MS, size 100 mm.

S&F 200mm long aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified

S&F 150mm long Extruded aluminum alloy handles, fabricated type, anodised complete all as specified .

S&F in repair 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or above butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (minimum weight 575 grams) complete all as specified .

S&F in repair Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-120gms) complete all as specified and directed.

S&F in repair 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for basin,sink,bathroom complete all as specified .

S&F in repair 125mm dia chromium plated perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed.

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc also Work in foul position etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 mixed (as per manufacturer’s instructions) on other than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet,manholes, soakwell,septic tank,drain and similar article finished surface even and smooth without using extra cement also work in foul position etc omplete all as specified and as directed.

M&L for Rendering 10mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying applying two coats of Cement Base Paint in any tint over and including one coat of alkali resistant primer (as per manufacturer’s recommendations) complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer smooth finish.etc complete all as specified and directed .

M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper over a coat of primer for smooth finish.etc complete all as specified and directed .

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain, septic tank, soak well also in foul condition etc complete all as specified and directed.

M&L for burnt clay brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per srl item no 64 here-in-before but except bricks. NOTE: Old Serviceable bricks quantity retrieved from demolition shall be used.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in copings, kneelers, apex stones,bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,, mitered/stopped ends etc complete all as specified and as directed. Note:- Inner girth shall only be measured.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thick (below or above ground level) and disposal of debris complete all as specified and directed.

M&L for 75mm thick plain Cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed.

M&L for 50 mm thick plain cement concrete type B-1 , 1:2:4 (using 20 mm graded crushed stone aggregate) finished even and smooth without using extra cement as in flooring complete all as specified and directed.

M&L for joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

All as per srl item No 73 here-in-before but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4

M&L for Joint free Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and joint free in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar

M&L for machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade rubber moulded glossy finish with grey cement and pigment (coloured) complete all as secified and as directed. Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by GE.

M&L for machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade rubber moulded glossy finish with grey cement and pigment (coloured) complete all as secified and as directed. Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by GE.

Refixing of machine pressed precast concrete interlocking paver block any shape & size with grey cement and pigment complete all as secified and as directed. Note-Shapes of interlocking paver block shall be riangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by GE.

M&L for sand filling under floors or in foundations including watering and consolidation or layer of sand cushioning below interlocking paver block complete all as specified and as directed.

S&F Cement concrete tiles 25cm x 25cm x22mm thick, with grey cement & pigment machine pressed; set, jointed & pointed in neat cement slurry in floors ,path & cut , polished over and including 20mm thick secreed bed or bedding in CM 1:6 complete all as secified and as directed.

Demolition of RCC of any description slab , shelves , chajjas, water tank ,chullah hoods, manholes cover,cover of septic tank/soak well etc (reinforcement cut as required to facilitate demolition) also Work in foul position etc and in any position and disposal of debris complete all as specified and directed.

M&L for for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs for drain & manholes,septic tank,soak well etc etc chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) inciuding form work to all complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately).

M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

M&L for mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, wind ties,cattle trap and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

All as per srl item No. 86 here-in-before but 20mm bore of pipe complete all as specified and directed..

All as per srl item No. 86 here-in-before but 25mm bore of pipe complete all as specified and directed..

M&L for tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.

All as per srl item No. 89 here-in-before but 20mm bore dia complete all as specified and directed.

All as per srl item No. 89 here-in-before but 25mm bore dia complete all as specified and directed.

S&F 25 mm bore Steel water tubing 'medium grade', galvanised, pipe fixing of over flow pipeline from overhead tank to ground level including tank nipple tee elbow nipple ,tee elbow nipple and socket . and dismantling existing GI tubing ( one and two storie building ) with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Notes :-For serial item no 1, 2, 3, 4 & 5 contractor will deploy sufficient manpower daily to attend day to day complaint as mentioned above in the concerned items. Mazdoor will report daily at compliant cell of AGE B/R - I Sub division at 8.30 AM to collect complaints and depart 5pm after attending all complaints. In case of none attending complaints in same day, recovery @ RS 250 per complaints will be recovered from contractor. (ii) Contractor accredited representative shall be available during cleaning. (iii) Unit rate quoted by tenderer shall included for all precautions to be taken by workers while working in foul condition, Contractor shall take all necessary actions. (2) Safety measures shall be followed by the contractor before execution of the work. The Contractor shall provide the oxigen Mask, Safety Helmet, handgloves, First Aid Box etc to workers for protection. Any mishapning occured due to negligence, the contractor shall be solely responsible for that. (3) All complaint will be considered as rectified with entire satisfaction of Engineer-in-charge & users. (4) Contractor or his accredited representative will update daily status of each complaint in register duly cheked by JE CIVIL at compliant cell of AGE B/R - I Sub division (sample provided by Sub divn) (5) Complaint slip book in duplicate with machine made srl no, date, for receiving of complaint,Registers of labour attendance will be provided by the contractor for recording day to day complaints during currency of contract period & Cost of required complaint slip book, register documents etc is included in this item. & returning after rectification will be provided and maintained by the contractor and register in standard format as per sample kept in AGE B/R -I Office will be provided by the contractor for recording day to day complaints during currency of contract period & Cost of required complaint slip book, register documents,labour attendance register etc is included in quioted rate (6) All T&P ( mechanical Iron rods, knot ropes , bamboo etc.),tranporataion of material and mazdoor required for attending the complaints shall be provided by the contractor without any extra. (7) Unit rate quoted by bidder is included for conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints. (8) Unit rate quoted by bidder is included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs if required at site. (9) Removing heaps of wastes, cleaning of flora, fauna, foliage and bushes around septic tanks, soakage well, manholes and along sewage line and removing debris/heaps of bushes etc from vicinity and depositing at a place where directed by Engr-in-charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 75,855.00 and any other reduction if any from quoted amount.

Please Enable Macros to View BoQ information