REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION OF MD AND

Amount

Taking down carefully copper/aluminium point wiring ( light,fan,power point or bell point etc) complete including fixture and fitting such as switches, ceiling rose holders & regulators light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc and for one light /fan point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2mm thick (flush metal box) for mounting of fittings like switch, socket , fan regulator etc complete with 3mm thick laminated switch board cover complete all as specified and directed. Note : 110 Nos of point wiring catered approx 15 Mtr are included in unit rate.

All as per srl item No 3 above but for One light point controlled by one switch complete all as specified and directed.

All as per srl item No 3 above but for One bell point controlled by one bell push complete all as specified and directed.

All as per srl item No 3 above but for One ceiling fan point controlled by one switch complete all as specified and directed.

All as per srl item No 3 above but for One exhust fan point controlled by one switch complete all as specified and directed.

All as per srl item No 3 above but for one light point controlled by two way switch complete all as specified and directed.

All as per srl item No 3 above but for One 3 Pin, 5/6 amps socket outlet point on the same board with 1.5 Sqmm cable size etccomplete all as specified and directed.

All as per srl item No 3 above but for One 3 Pin, 5/6 amps socket outlet point , independent board with 1.5 Sqmm cable size etc complete all as specified and directed.

All as per srl item No 3 above but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and existing concealed/open conduit including all accessories etc, and for one light /fan point controlled by one switch including 1.5Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in for mounting of fittings like switch, socket , fan regulator etc complete with 3mm thick laminated switch board cover complete all as specified and directed.

All as per srl item No 8 above but for One 3 Pin, 5/6 amps socket outlet point, independent board with 1.5 Sqmm cable size etc complete all as specified and directed.

All as per srl item No 8 here-in-before but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, heavy duty ISI marked with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly, covered with modular white cover palte with inner frame suitable for modular swithes, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

All as per srl item No 11 above but for One light point controlled by one, one way switch 5 Amps complete all as specified and directed.

All as per srl item No 11 above but for One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed.

All as per srl item No 11 above but for One 3 pin 5 Amps switch socket outlet point controlled by one, one way switch on the same board complete all as specified and directed.

All as per srl item No 11 above but for One 3 pin 5 Amps switch socket outlet point controlled by one, one way switch on indelpendednt board complete all as specified and directed.

All as per srl item No 11 above but for One bell point controlled by one, one bell switch 5 Amps complete all as specified and directed.

All as per srl item No 11 here-in-before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS, PVC insulated unsheathed 1100 volts grade for 5/15 Amps witch socket combination point including necessary running of 2.5 Sqmm copper conductor FRLS, PVC wire as earth continuity conductor alongwith wiring an connecting to the common earth dully complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked complete all as specified and directed.

S&F bell push flush type 5 Amp complete all as specified and directed.

S&F switch piano flush type 15 Amps, 230 volts, single pole, two way, ISI marked complete all as specified and directed.

S&F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 5 Amps flush type , ISI marked complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 15 Amps flush type universal, ISI marked complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65 x 20mm, 3 terminals complete all as specified and directed.

S&F electronic dimmers, 450W, 250V flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F for modular Switch piano flush type, single pole, one way and 5/6 Amp, single modularcomplete all as specified and directed.

S&F for modular Switch piano flush type, single pole, one way and 15/16 Amp, single modular complete all as specified and directed.

S&F for Bell push modular 6 Amps single module complete all as specified and directed.

S&F modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amps and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

S&F modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amps and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

S&F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for battan fittings complete all as specified and directed.

S&F for Bell Electric Ding dong type suitable for operation on 230 volt 50 Hz, AC supply etc complete all as specified and directed.

M&L for Sub Main wiring (concealed type) in & including with approved colour as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6.00 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Four runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run ( with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M&L for Sub Main wiring (concealed type) in & including with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.00 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run ( with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M&L for main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 4 Sqmm cable, one run (with Green colour for Earth) of 4 Sqmm cable and one run of PVC conduit shall be measured as one unit.

S&F for highly efficient LED bulbs, 10 watt used as a ready replacement for existing GL/CFL/direct fit lamp, in B-22 capacity complete all as specified and directed.

S&F LED lights fitting 1 x 9 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceilig rose comnplete all as specified and directed.

S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F 1 x 10 W LED light mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size comnplete all as specified and directed.

S&F LED lights fitting 1 x 20 W 220V, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilig rose comnplete all as specified and directed.

S&F for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220V recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including connecting up with driver three core flexible copperr conductor cases of suitable size complete all as specefied and directed.

S&F LED street/security light fitting 35 Watt 230 Volt, AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

S&F energy saving environmental friendly and robust , open type vertical highbay long life, exclusive innovative die-cast aluminium IP 65/66 industrial light with high power COB LEDs as light source, suitable for highlighting retails space 100 Watt LED replacement metal halide industrial light luminarie complete with all accessories, connecting up with twin core twisted flexible copper conductor cable all as specified and directed. Make :Havells cat part No-SAUCERGENXHBP100WLED757P90DBOLTG or equivalent to Crompton/Orient/ Bajaj.

S&F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one double pole MCB 20A, 10 KA 240 volt complete all as specified and as directed.

S&F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 40 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

M&L for dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with greasing the same with approved grade of grease, making all electrical connection and fixing and connectiong on its existing position and testing on completion complete all as specified and directed.

M&L for taking down & refixing after overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed. Note- (i) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (ii) The spares required shall be measured and paid separately in the relevant items.

Supply, fixing and connecting up flexible copper wire twin core of 23/.0078 complete all as specified and directed.

Supply only gun metal bush of any size (Make - MSP) complete all as specified and directed.

Supply only bearing for ceiling fan complete all as specified and directed. Make - TATA/SKF No.6201/6202

Supply only fan condensor 2.5 MFD complete all as specified and directed. Make – USHA / UNIVERSAL.

Supply only split pin complete all as specified and directed.

S&F of MCCB 63 Amps, 4 Pole, 415V, 16 KA''C' series complete all as specified and directed.

S&F of MCCB 100 Amps, 4 Pole, 415V, 16 KA, 'C' series complete all as specified and directed.

S&F of MCCB 160 Amps, 4 Pole, 415V, 16 KA, 'C' series complete all as specified and directed.

S&F of MCCB 200 Amps, 4 Pole, 415V, 16 KA, 'C' series complete all as specified and directed.

S&F Single phase static Energy meter of Accuracy Class 1.0, 240V, 50HZ with backlit LCD,of rating 5-30A (Measures & display KWh, KVAh, V, I, KW, PF, last month history of KWH & MD in KW) with special features like TOD Tamper logging, optical communication Port & Dislay in Absence of Power with Transparent Hinge Type Box complete all as spesified and directed. Make-L&T/HPL/SCHEINDER confirming to IS-16444. Note :- Unserviceable Electric meter depositd to MES Yard rate inclusive in item rate).

S&F AC three phase static Energy meter of Accuracy Class 1.0, 3 x 240V, 50HZ with backlit LCD, of rating 5-30A (Measures & display KWh,only) & Dislay in Absence of Power with Transparent Hinge Type Box complete all as spesified and directed. Make-L&T/HPL/SCHEINDER confirming to IS-16444. Note :- UNSV Electric meter depositd to MES Yard rate inclusive in item rate).

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs asearthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part-I (2009) including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal complete all as specified and directed. Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Schedule of credit amount of Rs. 72,291.00 to be deducted during AOC.

ELCON

S K TRADERS