Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹5.0 L
Closing Date
3 Jul 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
AE VCC
Development of Gandhi Nagar Main Road in Vijayapur City corporation Limit
DMA/2025-26/RD/WORK_INDENT42032
DMA/2025-26/RD/WORK_INDENT42032
Open
Roads
Two Tender Document System(Two Cover)
DMA City Corporation Vijayapura
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactory completed, at least one similar Nature of work such as Cement Concrete (CC) Road work of value not less than Rs. 168.00 Lakhs as prime contractor. (last five years i.e., 2020-21 to 2024-25)
Executed in any one year the following minimum quantities of work 1)Earthwork 2460.86 Cum., 2)Embankment/Subgrade Construction 2871.45 Cum, 3)WMM/GSB 1320.00 Cum, 4)PQC/PCC/DLC 2272.42 Cum
Availability by owning at least 50 Percentage of the required key and critical equipment for this work and the remaining 50 Percentage can be deployed on lease/hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipment s along with RC issued by R.T.O. for all applicable vehicles/Sale deed/purchase invoice, hire/lease agreements) shall be furnished. (1) Excavator: 2 Nos (1 No. Own and 1 No. Own/Hire), (2) Tippers: 4 No.s (2 No. Own and 2 No. Own/Hire), (3) Vibratory Roller: 2 Nos. (1 No. Own and 1 No. Own/Hire), (4) WMM/GSB Batching & mixing Plant: 1 No. (Own/Hire), (5) RMC (Ready Mix Concrete) Batching Plant and Mixing Plant: 1 No. (Own/Hire) (Within 25 Km. From Vijayapur City Limit) and (6) Transit Concrete Mixers: 4 Nos. (Own/Hire)
Valid KPWD Contractor License Registration
Achieved in at least two financial years a minimum financial turnover with Annual Profit and Loss Statement must be upload (in all classes of civil engineering construction works only) of Rs. 670.00 Lakhs (last five years i.e., 2020-21 to 2024-25).
Liquid assets and/or availability of credit facilities of no less than Rs. 100.30 Lakhs Credit lines/letter of credit/certificates from the banks for meeting the fund requirement etc.
₹5,000
₹5.0 L
20 Jun 2025
20 Jun 2025
4 Jul 2025
30 Jun 2025
25 Jun 2025
Development of Gandhi Nagar Main Road in Vijayapur City corporation Limit
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...
Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...
Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...
Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...
Dry Lean Cement Concrete Sub-base - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse...
Pavement Quality Concrete using paver - M40 Grade - Construction of M40 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended ...
Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...
Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)
pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...
Mechanical Means -
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, str...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)
pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down sie graded metal of approved quality and with an offset of 0.15m alround the cha...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down sie graded metal of approved quality and with an offset of 0.15m alround the cha...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down sie graded metal of approved quality and with an offset of 0.15m alround the cha...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down sie graded metal of approved quality and with an offset of 0.15m alround the cha...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down sie graded metal of approved quality and with an offset of 0.15m alround the cha...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
42032 KW-4.doc
Tender Document • 0.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .