Construction of Residential Tower for Hon. Ministers on Governments Puratan Bunglow, Plot No.274, B.G. Kher Marg,

CIVIL WORK (PART- A)

Item No.1. Excavation for foundations of substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in all types of soils, vegetable earth, soft murum,gravel, running sand, shingle, turf clay, loam,peat, ash, shale, slag, chalk, garbage, muddy/ marshy/ slushy soil, marine clay,reclaimed land etc.in earth, soil of all types, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. Spec. No.Bd.A.1 Page No. 259 Note: The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.2. Excavation for foundation of substructures,basements, tanks, sumps, walls,chambers, manholes, trenches, poles, pits & general building works in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift from 1.5 to 3.0m) By Mechanical Means Spec. No.Bd.A.2 Page No. 259 Note: The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.3. Excavation for foundation of substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metrs beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth/murum, ramming, watering including shoring and strutting etc.complete (Lift from 1.5 to 3.0m) By Mechanical Means. Spec. No.Bd.A.4 Page No. 259 Note:The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.4. Excavation for foundation of substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming including shoring and strutting etc. complete. (Lift from 1.5 to 3m). By Mechanical Means Note:The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.5. Excavation for foundation of substructures,basements, tanks, sumps, walls,chambers, manholes, trenches, poles, pits & general building works in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting including taking confirmatory bores upto minimum 3 meter depth below foundation level to ascertain strata underneath foundation etc. complete. (Below 3.0m) By Mechanical Means Spec. No.Bd.A.2 Page No. 259 Note:The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.6. Excavation for foundation of substructures,basements, tanks, sumps, walls,chambers, manholes, trenches, poles, pits & general building works in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metrs beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth/murum, ramming, watering including shoring and strutting including taking confirmatory bores upto minimum 3 meter depth below foundation level to ascertain strata underneath foundation etc.complete (Below 3.0m) By Mechanical Means. Spec. No.Bd.A.4 Page No. 259 Note: The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.7. Excavation for foundation of substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming including shoring and strutting including taking confirmatory bores upto minimum 3 meter depth below foundation level to ascertain strata underneath foundation etc. complete. (Below 3.0m). By Mechanical Means Note:The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc.

Item No.8. Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyri fos per square meter surface area covering 10 years guarantee on bond paper. Spec. As directed by Engineer in charge.

Item No.9. Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. Spec. As directed by Engineer in charge.

Item No.10. Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. Spec. As directed by Engineer in charge.

Item No.11. Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. Spec. As directed by Engineer in charge.

Item No.12. Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No.Bd.A.10 Page No.262.

Item No.13. Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. Bd.A.11 Page No.263

Item No.14. Providing and laying Cast in situ/Ready Mix cement concrete in M-20of trap/ granite/quartzite/gneiss metal for foundation & bedding including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd.E.2 Page No.288 and B.7 Page No 38.

Item No.15. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate. (Crushed sand VSI Grade) Spec. No. Bd.F.3 Page No. 298 and B.7, Page No.38. (Cement bags 9.0 bags/Cum)

Item No.16. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift.Spec. No.Bd.F.5 Page No. 300 and B-7, Page No 38. (Cement bags 9.0 bags/Cum) Upto Ground Level

Item No.17. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd.F.5 Page No. 300 and B-7, Page No 38. (Cement bags 9.0 bags/Cum) Above Ground Level

Item No.18. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38. (Cement bags 9.0 bags/Cum) Upto Ground Level

Item No.19. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38. (Cement bags 9.0 bags/Cum) Above Ground Level

Item No.20. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No. Bd.F.8 Page No.302 and B.7, Page No.38 (Cement bags 9.0 bags/Cum) Upto Ground Level

Item No.21. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No. Bd.F.8 Page No.302 and B.7, Page No.38 (Cement bags 9.0 bags/Cum) Above Ground Level

Item No.22. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd.F.9 Page No. 303 and B.7, Page No.38. (Cement bags 9.0 bags/Cum)

Item No.23. Providing and laying Cast in situ/Ready Mix cement concrete M-45 of trap / granite / quartzite / gneiss metal for R.C.C. canopy as per detailed designs and drawings including steel centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd.F.8 Page No. 303 and B.7, Page No.38. (Cement bags 9.0 bags/Cum )

Item No.24. Providing and laying Cast in situ/Ready Mix cement concrete in M-45 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of 200mm thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd.F.11 Page No. 304 and B.7, Page No. 38 (Cement bags 9.0 bags/Cum) Up to Ground Level

Item No.25. Providing and laying Cast in situ/Ready Mix cement concrete in M-45 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of 200mm thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd.F.11 Page No. 304 and B.7, Page No. 38 (Cement bags 9.0 bags/Cum) Above Ground Level

Item No.26. Providing and laying Cast in situ/Ready Mix cement concrete in M-45 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab,steps of staircases and ramps as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift. Spec. No.Bd. F. 13 Page No. 305 /I.S. 456 (2000) (Cement bags 9.0 bags/Cum) Up to Ground Level

Item No.27. Providing and laying Cast in situ/Ready Mix cement concrete in M-45 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, steps of staircases and ramps as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) with all lead and lift.Spec. No.Bd. F. 13 Page No. 305 /I.S. 456 (2000) (Cement bags 9.0 bags/Cum) Above Ground Level

Item No.28. Providing and laying in situ cement concrete M-45 with tremix treatment for Concrete flooring is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate (VSI grade finely washed crushed sand) etc. complete. Spec. No. MORTH 602 (Cement bags 9.0 bags/Cum )

Item No.29. Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.Bd.F.17, Page No. 306. Upto Ground Level

Item No.30. Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, archesetc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.Bd.F.17, Page No. 306. Above Ground Level

Item No.31. Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer in charge and BDG- 2 & 5.

Item No.32. Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of required size in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints, racking out joints watering and scaffolding etc.complete. Spec. As directed by Engineer in Charge. Upto Ground Level

Item No.33. Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of required sizein extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including, striking joints, racking out joints watering and scaffolding etc.complete. Spec. As directed by Engineer in Charge. Above Ground Level

Item No.34. Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of required sizein extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25mm x 1.6mm at every third course, properly bend and bonded at ends scaffolding racking out joints and watering compete. Spec. As directed by Engineer in Charge.

Item No.35. Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane asapproved by Engineer incharge,followed by 112mm thick brick bat coba covered with 20mm mortar finish.If the reare cracks on the bare slab,open the crack in VGroove and fill it with ready to use repair polymermodified mortar based on special cements,aldehydebasedpolymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be groute dasper the instructions of site in charge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious water proofing coating having a non-toxic, 2-(methoxy carbonyl)-1 propene - Butyl 2 propenoate (MPBP) based polymeric waterproofing solutionas approved by Engineer in charge. Provide and lay 112mm average thickness of brick bat coba in cement mortar 1:5 over 12mm thick CM1:3 bedding with one pouch of 330grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kilogram bag of cement and finishing with 20mmthick cement plaster in cement mortar 1:3 by mixing one 330gram spouch of above admixture per 50 Kilogram bag of cement, including all lead, lifts and laid to proper slope to drain of water entirely preparing bell mouth including watta, etc. complete. Spec. As directed by Engineer in charge.

Item No.36. Waterproofing Treatment to new Toilet / bathroom by using Polymeric Cementitious Membrane as approved by Engineer incharge, followed by 112mm thick brick bat coba covered with 20mm mortar finish. If the reare cracks on the bare slab, open the crack in Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be groute dasper the instructions of site in charge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)- 1-propene-Butyl 2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112mm average thicknes of brickbat coba in cement mortar 1:5 over 12mm thick CM1:3 bedding with one pouch of 330grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensat ingagents as approved by Engineer in charge per 50 Kilogram bag of cement and finishing with 20mm thick cement plaster in cement mortar 1:3 by mixing one 330grams pouch of above admixture per 50 Kilogram bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, etc. complete. Spec. As directed by Engineer in charge.

Item No.37. Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Spec. As directed by Engineer in charge.

Item No.38. Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. Spec. As directed by Engineer in charge.

Item No.39. Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec. No.Bd.J.2 Page No.355.

Item No.40. Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec. No.Bd.J.2 Page No. 355.

Item No.41. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Spec. No. Bd.L.2 Page No.368. (Use Natural sand) Up to Ground Level.

Item No.42. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Spec. No. Bd.L.2 Page No.368. (Use Natural sand) Above Ground Level.

Item No.43. Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc. complete. Spec. As directed by Engineer in charge. Up to Ground Level

Item No.44. Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc. complete. Spec. As directed by Engineer in charge. Above Ground Level

Item No.45. Providing coat of classic seal SF / Indigo a dry mix white cement based polymerized with VINNAPAS a product of wacker Polymers - Germany or equivalent make in two coats on concrete / masonry surface by griding joints and proper cleaning the surface by washing before application of first coat, classic seal SF or equivalent make, first coat upto 4mm thick shall be applied to cover dips / depressions in walls with prepared compound with trowel and straingthen it with wide trowel. After drying of first coat, second coat of classic seal SF or equivalent make up to 2mm thick shall be applied or entire surface as a finish coat including scaffolding, grinding joints, cleaning the surface etc. complete. Spec. As directed by Engineer in charge.

Item No.46. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1kg percement bag curing the same for not less than 2 day sand keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec. No. Bd.L.7 Page No.369. (Use Natural sand)

Item No.47. Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc.complete. Spec. As directed by Engineer in charge.

Item No.48. Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec. As directed by Engineer in charge.

Item No.49. Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. Spec. As directed by Engineer in charge.

Item No.50. Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No.Bd.M.3 Page No. 380. Up to Ground Level.

Item No.51. Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No.Bd.M.3 Page No. 380. Above Ground Level.

Item No.52. Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. Spec. As directed by Engineer in Charge. Up to Ground Level.

Item No.53. Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. Spec. As directed by Engineer in Charge. Above Ground Level.

Item No.54. Providing Mirror polishing to Kota Stone for flooring including using all necessary stones and equipments cleaning, washing etc. complete Spec. As directed by Engineer in charge. Up to Ground Level.

Item No.55. Providing Mirror polishing to Kota Stone for flooring including using all necessary stones and equipments cleaning, washing etc. complete Spec. As directed by Engineer in charge. Above Ground Level.

Item No.56. Providing Mirror polishing to Kota Stone for skirting including using all necessary stones and equipments cleaning, washing etc. complete Spec. As directed by Engineer in charge. Up to Ground Level.

Item No.57. Providing Mirror polishing to Kota Stone for skirting including using all necessary stones and equipments cleaning, washing etc. complete Spec. As directed by Engineer in charge. Above Ground Level.

Item No.58. Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Spec. No.Bd.M.12, Page No. 385. (Basic rate of Tile = Rs. 463/Sq.m. inclusive of transportaion, etc. complete.)

Item No.59. Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Spec. No.Bd.M.13 Page No. 386. (Basic rate of Tile = Rs. 489/Sq.m. inclusive of transportaion, etc. complete)

Item No.60. Providing and laying vitrified mirror / glossy finish tiles decorative type premium double charged having size 600 x 600mm of 8 to 10mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Spec. No.Bd.M.12 Page No.385 (Basic rate of Tile = Rs. 573/Sq.m. inclusive of transportaion, etc. complete)

Item No.61. Providing and laying vitrified mirror / glossy finish tiles decorative type premium double charged having size 600 x 600mm of 8 to 10mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Spec. No.Bd.M.12 Page No.385. (Basic rate of Tile = Rs. 573/Sq.m. inclusive of transportaion, etc. complete)

Item No.62. Providing and laying telephone black/Amba White/Cadbury brown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/window boxing etc.on C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Granite = Rs. 2518.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.63. Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning etc. complete. Spec. No. Bd.M.22 Page No.390

Item No.64. Providing and laying in position flooring of Italian Marble of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats, Araldite at the rate of 0.1 kg/sq.m., chemical compound at the rate of 2.5 kg/sq.m., striking joints, curing and cleaning etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Italian Marble = Rs. 3228.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.65. Providing and laying in position skirting of special coloured Italian Marble of approved shade and size 18 mm to 20 mm thick including cement floats,Araldite at the rate of 0.1 kg/sq.m., chemical compound at the rate of 2.5 kg/sq.m,striking joints, chamfering, edge polish, curing and cleaning etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Italian Marble = Rs. 4573.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.66. Providing and laying in position Special coloured Italian Marble for toilet flooring of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats, Araldite at the rate of 0.1 kg/sq.m., chemical compound at the rate of 2.5 kg/sq.m, striking joints, curing and cleaning etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Italian Marble = Rs. 4573.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.67. Providing and laying in position dado of Italian Marble of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats,Araldite at the rate of 0.1 kg/sq.m., chemical compound at the rate of 2.5 kg/sq.m, striking joints, chamfering, edge polish, curing and cleaning etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Italian Marble = Rs. 3228.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.68. Providing Mirror polishing to Italian marble including using all necessary stones and machinery equipments including cleaning, washing. Use a Damp Microfiber cloth with warm water and neutral detergent, gently rubbing the stain until the area is clean, then rinse thoroghly. Removing stubborn stains : dampen marble with water apply a few drops of a cleaning chemical, using Sancitro. Gently rub in with a stiff bristled brush and rising thoroughly, stuborn stains require three applications. Eco polishing of marble using a mixture of baking soda and water as a polish.Combine (45 g) of baking soda to (0.9 L) of water and mix well.Then using a clean cloth, apply the mixture to your surface in a thin layer. Allow to dry for about 5 hours.After which using a Microfiber Cloth and warm water to rinse the marble surface you are ready to dry buff the marble using a clean microfiber or chamois cloth, gently wipe down the marble in wide, circular motions, move in progressively smaller circles as the surface dries. Using Sealer N or Lapicur, Apply three coats of Lapicur or Sealer N using a clean Flat Microfiber Mop one coat at a time allowing to dry in between coats. By burnishing you do not have to allow the marble to cure for 6-8 hours,during this time do not use the surface as it is easily damaged if you dont burnish, etc. complete. Spec. As directed by Engineer in charge.

Item No.69. Providing and applying three coats pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. Spec. As directed by Engineer in charge

Item No.70. Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (including primer coat) etc. complete. Spec. No. Bd.O.7 Page No.406.

Item No.71. Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (including primer coat) etc.complete. Spec. No. Bd.P.5 Page No.413

Item No.72. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide and Absorbs CO2 (4.8 kg/15 l) plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer,Jotashied Penetrating primer of Jotun or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Spec. As directed by Engineer in charge

Item No.73. Providing and fixing false ceiling of 15mm thick Armstrong make as per drawings including powder coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm size, G.I. grid runners of size 15 mm x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. Spec. As directed by Engineer in charge.

Item No.74. Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm centertocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder-coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per the directions of Engineer in charge. Spec. As directed by Engineer in charge.

Item No.75. Providing and fixing Aluminium rectangular tube section of various size as per detailed drawings & specifications, including fixing using clips and fasteners,powder coating to aluminium sections, in required colour and shade with minimum 5 micron thickness including 7 course chemical cleaning including transporting, scaffolding all necessary labour and machinery etc. complete. Spec. As directed by Engineer in charge.

Item No.76. Providing and laying Special coloured Italian Marble of 18 to 20 mm thick for door frame / window boxing / Sills etc. as per detailed drawing and design on C.M. 1:6 including filling joints with polymer base filler nosing / chamfering the edges, Moulding / rounding, edge polish wherever necessary, curing, chemical compound at the rate of 2.5 kg/sq.m etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Italian Marble = Rs. 4573.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.77. Providing and fixing solid core flush door shutter in single leaf 30 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3/4 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,150 mm heavy duty hinges (4 No.) and finishing with French Polish etc. complete. Spec. As directed by Engineer in charge.

Item No.78. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Pull Handle (Neki PHA 2210 or equivalent) Satin. Spec. As directed by Engineer in charge.

Item No.79. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Door closer (Hyper or equivalent). Spec. As directed by Engineer in charge.

Item No.80. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Floor Door Stopper (Neki or equivalent) (DST 1005). Spec. As directed by Engineer in charge.

Item No.81. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Wall Door Catcher (SS Body) (Dorset or equivalent). Spec. As directed by Engineer in charge.

Item No.82. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Sign Plates (Neki EP 42 or equivalent) Satin. Spec. As directed by Engineer in charge.

Item No.83. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Square Handle (Neki PHS 2212 or equivalent) Satin. Spec. As directed by Engineer in charge.

Item No.84. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Door Knob (Neki or equivalent) Satin (DNR 50). Spec. As directed by Engineer in charge.

Item No.85. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Mortise lock with handle. Spec. As directed by Engineer in charge.

Item No.86. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Eye hole. Spec. As directed by Engineer in charge.

Item No.87. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Safety chain. Spec. As directed by Engineer in charge.

Item No.88. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. 16mm dia. & 450mm long Aldrop (CENT or equivalent). Spec. As directed by Engineer in charge.

Item No.89. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. 12mm dia. & 350mm long brass oxidized tadi patti. Spec. As directed by Engineer in charge.

Item No.90. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. 450mm long brass oxidized tower bolt. Spec. As directed by Engineer in charge.

Item No.91. Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. 300mm long brass oxidized tower bolt. Spec. As directed by Engineer in charge.

Item No.92. Providing and fixing in position UPVC sliding doors of two tracks as per detailed drawings & design and Foil 2S walnut colour, slider of bugscreen no monsoon guard ,no mesh joint, S65 PS1 slider sash,fibre mesh bug mesh , BS midrail , inside BS position , normal BS midrail type , slider threshold with threshold /118 mm, 1 no. BS midrail ,C type BS handle , gold colour handle, inner & outer track espag patio handle , DG INS TGH(6T + 12 + 6T) mm as directed by Engineer in charge with all necessary UPVC sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. Spec. As directed by Engineer in charge. Glazing -DG INS TGH(6T + 12 + 6T (Weight of UPVC sliding door is 40.185 Kg/Sqm) Make : Fenesta or equivalent.

Item No.93. Providing and fixing in position UPVC sliding doors of three tracks as per detailed drawings & design and Foil 2S walnut colour,slider of bugscreen no monsoon guard ,no mesh joint , S65 PS1 slider sash,fibre mesh bug mesh , BS midrail , inside BS position , normal BS midrail type , slider threshold with threshold /118 mm, 1 no. BS midrail ,C type BS handle , gold colour handle, inner & outer track espag patio handle , DG INS TGH(6T + 12 + 6T) mm as directed by Engineer in charge with all necessary UPVC sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. Spec. As directed by Engineer in charge. Glazing -DG INS TGH(6T + 12 + 6T)MM (Weight of UPVC sliding door is 38.20 Kg/Sqm) Make : Fenesta or equivalent.

Item No.94. Providing and fixing in position UPVC sliding windows / ventilators of two tracks as per detailed drawings & design and Foil 2S walnut colour,slider of bugscreen no monsoon guard ,no mesh joint , S65 PS1 slider sash,fibre mesh bug mesh , BS midrail , inside BS position , normal BS midrail type , slider threshold with threshold /118 mm, 1 no. BS midrail ,C type BS handle , gold colour handle, inner & outer track espag patio handle , DG INS TGH(6T + 12 + 6T) mm as directed by Engineer in charge with all necessary UPVC sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. Spec. As directed by Engineer in charge. Glazing -DG INS TGH(6T + 12 + 6T)MM (Weight of UPVC sliding window is 47.21 Kg/Sqm) Make : Fenesta or equivalent.

Item No.95. Providing and fixing in position UPVC sliding windows / ventilators of three tracks as per detailed drawings & design and Foil 2S walnut colour,slider of bugscreen no monsoon guard ,no mesh joint , S65 PS1 slider sash,fibre mesh bug mesh , BS midrail , inside BS position , normal BS midrail type , slider threshold with threshold /118 mm, 1 no. BS midrail ,C type BS handle , gold colour handle, inner & outer track espag patio handle , DG INS TGH(6T + 12 + 6T) mm as directed by Engineer in charge with all necessary UPVC sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. Spec. As directed by Engineer in charge. Glazing -DG INS TGH(6T + 12 + 6T)MM (Weight of UPVC sliding window is 44.75 Kg/Sqm) Make : Fenesta or equivalent.

Item No.96. Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25mm at weight 0.417 kg/Rmt. as per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain / opaque glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc., complete. With colour Anodising with box. Spec. As directed by Engineer in charge.

Item No.97. Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete. Spec. As directed by Engineer in charge.

Item No.98. Providing and fixing glass doors as per detailed drawings & design. Door shutters shall be consist of full height 12mm thick toughened glass with crystal polished on all four edges fixed in Stainless steel finish heavy type brass patch fitting with 1 pair of brushed SS handle 32mm Dia., 2030mm height including Miscellaneous hardware etc. complete. Spec. As directed by Engineer in charge.

Item No.99. Providing and fixing glass partition as per detailed drawing and design. Glass partition shall be consist of 10mm thick clear toughened glass fixed in Aluminium profile top, bottom & sides. All the edges of the glass shal be crystal polished. Item shall include rubber gasket lining and all miscellaneous hardware etc. complete. Spec. As directed by Engineer in charge.

Item No.100. Providing and fixing mild steel grill work for windows, ventilators etc. 15 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No.Bd.U.1 Page No. 537.

Item No.101. Providing and fixing matt finish stainless steel of (302 grade) railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm dia meter etc. complete. Spec. As directed by Engineer in charge.

Item No.102. Providing and fixing 900 mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5 mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. Spec. As directed by Engineer in charge.

Item No.103. Providing and fixing screw down for 25mm dia. C.P. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.Bd.V.9 Page No.555

Item No.104. Providing and fixing screw down for 32mm dia. C.P. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.Bd.V.9 Page No.555

Item No.105. Providing and fixing screw down for 50mm dia. C.P. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.Bd.V.9 Page No.555

Item No.106. Providing and fixing screw down for 80mm dia. C.P. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.Bd.V.9 Page No.555.

Item No.107. Providing and fixing Belgium mirror on 8mm thick waterproof ply with alluminium profile on all four edges as per detailed drawings & design etc. complete. Spec.As directed by Engineer in charge.

Item No.108. Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Spec.As directed by Engineer in charge.

Item No.109. Providing and fixing Single towel rail 600mm long of Jaquar make including all accessories complete. Spec.As directed by Engineer in charge. (Towel rail : Jaquar make CAN-1111SM or equivalent)

Item No.110. Providing and fixing Towel rack with lower hanger of Jaquar make including all accessories complete. Spec.As directed by Engineer in charge. (Towel rack : Jaquar make AHS-1581 or equivalent)

Item No.111. Providing and fixing Towel ring round with round flange (Stainless steel) of Jaquar make including all accessories complete. Spec.As directed by Engineer in charge. (Towel ring : Jaquar make CAN-1121BN or equivalent)

Item No.112. Providing and fixing chromium plated towel rod 16 mm dia. and 75 cm. in length including all accessories complete. (Towel rod : Jaquar make AHS-1507 or equivalent) Spec.As directed by Engineer in charge.

Item No.113. Providing and fixing chromium plated towel ring including all accessories complete. (Towel ring : Jaquar make CAN-CHR-1121BN or equivalent) Spec.As directed by Engineer in charge.

Item No.114. Providing and fixing 40mm dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. As directed by Engineer in charge.

Item No.115. Providing and fixing 10cm PVC nahani trap (Long arm) with grating etc. complete. (Nahani Trap Make : Jain / Supreme / Finolex or equivalent.) Spec. No.BD.V 32 A Page 551 and as directed by Engineer in charge.

Item No.116. Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. As directed by Engineer in charge. (Make : Nirali or equivalent)

Item No.117. Providing and fixing Angular stop cock with wall flange Jaquar make or equivalent continental including necessary sockets/union nut etc. complete. (Jaquar make OPP-15053PM or equivalent) Spec. As directed by Engineer in charge.

Item No.118. Providing & fixing Two way BIB cock with Health faucet etc. complete. Spec. As directed by Engineer in charge. (2 way BIB cock : Jaquar make OPP15041PM or equivalent, Health faucet : Jaquar make ALD-565 or equivalent)

Item No.119. Providing and fixing 15mm dia. Screw down 2 way C.P. BIB bib cock with Health faucet including necessary sockets, union nut etc. complete. (Two way BIB Cock : Jaquar make CON-041KN or equivalent, Health Faucet : Jaquar make ALD-573 or equivalent). Spec. As directed by Engineer in charge.

Item No.120. Providing & fixing single lever wall mixer 3 in 1 system with provision for both hand shower & over head shower with 115mm long bend pipe, connecting legs & wall flange with Hand shower 200mm round shape single flow with aur effect (ABS body & face plate chrome plated) with rubit cleaning system including Flexible tube 12mm dia. & 1.5m long with nuts and Wall outlet with shower hook in square shape, Over head shower 300x 300mm sqauare shape flow (ABS body chrome plated with gray face plate) with rubit cleaning system and fittings like socket union, nuts, bends, valves, reducers, including necessary drilling holes in walls, slabs etc and remaking good the demolished portion to restore the same in original condition neatly and cleaning the site after completion of work, testing etc. complete. Spec. As directed by Engineer in charge. (Wall Mixer : Jaquar make OPP-15125PM or equivalent, Hand shower : HSH-1727 or equivalent, Over head Shower : Jaquar make OHS-35497 or equivalent, Flex Tube : Jaquar make SHA-549D12 or equivalent, Shower hook : Jaquar make SHA-566S or equivalent).

Item No.121. Providing and fixing chromium plated wall mixer cock of heavy duty without washer with chromium plated showers with/without telephonic arrangement including shower rose, necessary supply pipes 15 mm dia. and fittings like socket union, nuts, bends, valves, reducers, including necessary drilling holes in walls, slabs etc and remaking good the demolished portion to restore the same in original condition neatly and cleaning the site after completion of work, testing etc. complete. (Wall Mixer : Jaquar make CON-273NUPR or equivalent, Over Head shower : OHS 1989 or equivalent, Shower rose : Jaquar make 477 or equivalent). Spec. As directed by Engineer in charge.

Item No.122. Providing and fixing BIB cock with wall flange of Jaquar make including necessary sockets/ union nut etc. complete. Spec. As directed by Engineer in charge. (Jaquar make OPP-15037PM or equivalent)

Item No.123. Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON047) including necessary sockets/ union nut etc. complete. Spec. As directed by Engineer in charge.

Item No.124. Providing and fixing single lever sink mixer with swinging spout (Table mounted) with 450mm long braided hoses of Jaquar make including necessary sockets/ union nut etc. complete. Spec. As directed by Engineer in charge. (Jaquar make OPP-15173BPM or equivalent)

Item No.125. Providing & fixing Toilet Paper holder of jaquar make including making holes and necessary hardware like screws etc. and making good the damages etc. complete. Spec. As directed by Engineer in charge. (Paper Holder : Jaquar make AHS-1553 or equivalent)

Item No.126. Providing & fixing Soap Dish holder of jaquar make including making holes and necessary hardware like screws etc. and making good the damages etc. complete. Spec. As directed by Engineer in charge. (Soap dish holder : Jaquar make CAN-1131N or equivalent)

Item No.127. Providing & fixing Soap Dish holder etc. complete. (Soap dish holder : Jaquar make CAN-CHR-1131N or equivalent) Spec. As directed by Engineer in charge.

Item No.128. Providing & fixing Tumbler holder of jaquar make including making holes and necessary hardware like screws etc. and making good the damages etc. complete. Spec. As directed by Engineer in charge. (Tumbler holder : Jaquar make CAN-1141N or equivalent)

Item No.129. Providing & fixing 40mm Strainer etc. complete. Spec. As directed by Engineer in charge.

Item No.130. Providing & fixing 65mm Strainer etc. complete. Spec. As directed by Engineer in charge.

Item No.131. Providing and fixing White Glazed Earthenware full stall type Urinal with flush valve, bottle trap with fitting, inlet pipes and stop tap, brackets for fixing, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection up to the outside face of the wall. Spec. As directed by Engineer in charge. Urinal (Top inlet) with fixing accessories : URS-WHT-13259 (Size: 475 x 315 x 715 mm) or equivalent, Bottle Trap : Jaquar make ALD-769L (300 x 190) or equivalent, Flush valve make : Jaquar FLV-1085KN or equivalent)

Item No.132. Providing and fixing white glazed earthenware Table top basin of 565 x 420 x 140 mm size as per detailed drawing & design including single lever basin mixer (Piller cock) without pop up waste with 450mm long braided hoses, Bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes & wall flange, exposed part kit of concealed stop cock and flush cockwith fitting sleeve, operating lever & adjustable wall flange with seal etc. complete. Spec. As directed by Engineer in charge. (Table Top Basin : Jaquar make KUS-WHT-35935 or equivalent, Piller cock : Jaquar make OPP-15011BPM or equivalent, Bottle Trap : Jaquar make ALD-769L (300 x 190) or equivalent, Concealed Stop Cock : Jaquar make OPP-15083KPM or equivalent).

Item No.133. Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets,rubber plug sand brass chain,stop tap and necessary pipe connection including P.V.C.waste pipe and trap up to the out side face of the wall. Making good the damaged surface, testing etc. complete. Spec. No.BDV.30 Page No.616 (Wash Basin : Jaquar make ECS-WHT-803 or equivalent, Bottle Trap : Jaquar make ALD-769L or equivalent, Stop Cock – Jaquar make CON 53KN or equivalent, Pillar Cock : Jaquar make CON-021KN or equivalent).

Item No.134. Providing and constructing kalinga quartz stone kitchen platform as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished kalinga quartz 16 to 20 mm top with side strips of kalinga quartz at front and both sides of platform raised with two vertical kalinga quartz supports 15 cm height and top kalinga quartz of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as kalinga quartz,chemical compound at the rate of 2.5 kg/sq.m etc. complete. Spec. As directed by Engineer in charge. (Basic rate of kalinga quartz = Rs. 3228.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.135. Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75x40 cm including cutting,opening for sink of required size in kadappah as well as granite etc.complete. Spec. As directed by Engineer in charge. (Basic rate of Granite = Rs. 2518.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.136. Providing and constructing Special coloured Italian Marble platform for Table Top basin as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished Italian Marble 16 to 20 mm top with side strips of Italian marble at front and both sides of platform raised with two vertical Italian mable supports and top Italian marble including cutting, Araldite at the rate of 0.1 kg/sq.m., chemical compound at the rate of 2.5 kg/sq.m, etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Italian Marble = Rs. 4573.00/Sq.m. inclusive of polishing, transportaion, etc. complete.)

Item No.137. Providing & fixing in position Wall hung WC with UF soft close slim seat cover, Hinges, accessories set, of size 360 x 500 x 380mm, Single piece slim concealed cistern with floor mounting frame, installation kit & S type drain pipe connection set for wall hung WC with flush control plate, etc. complete. Spec. As directed by Engineer in charge. (Wall Hung WC with seat cover : Jaquar make LYS-WHT-38951SM or equivalent, Concealed cistern : Jaquar make JCS-WHT-2400FS or equivalent, Flush control panel : Jaquar make JCP-CHR-852415 or equivalent)

Item No.138. Providing & fixing in position European type White glazed earthenware Wall Hung type water closet, Back inlet, 'P' trap C. I. bracket with C.P. bolt, matching seat cover & fixing concealed type C.P. flush valve with 32mm size control cock & required length operating lever assembly & connecting its outlet to the W.C. pan testing etc. complete. (Wall Hung W.C. : Jaquar make ECS-WHT-955S/N or equivalent, Seat cover : Jaquar make CNS-WST-WCS1 or equivalent, Flush Valve Make - Jaquar FLV-1085KN or equivalent.) Spec. As directed by Engineer in charge.

Item No.139. Providing and fixing in walls/ ceiling/ floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.140. Providing and fixing in walls/ ceiling/ floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.141. Providing and fixing in walls/ ceiling/ floor 32mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.142. Providing and fixing in walls/ ceiling/ floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.143. Providing and fixing in walls/ ceiling/ floor 50mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.144. Providing and fixing in walls/ ceiling/ floor 65mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.145. Providing and fixing in walls/ ceiling/ floor 80mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. No.BD.V 5 Page 551 and as directed by Engineer in charge.

Item No.146. Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Spec. As directed by Engineer in charge.

Item No.147. Providing and fixing in position UPVC ultra violet stabilized 110mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete. Spec. As directed by Engineer in charge.

Item No.149. Providing, laying and fixing U.P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec.As directed by Engineer in charge.

Item No.150. Providing, laying and fixing U.P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec.As directed by Engineer in charge.

Item No.151. Providing and fixing 30cm x 30cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No.Bd.V.38, Page No. 572

Item No.152. Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No.Bd.V.43, Page No. 574.

Item No.153. Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No.Bd.V.43, Page No. 574.

Item No.154. Providing, constructing and fixing 450 mm dia. Inspection chamber made up of Polypropylene/polyethylene material of thickness 3.5 mm and height of 388 mm with160 or 200 mm main inlet(s) outlet and 110 and/or 160mm branch inlets, with 450 mm dia.Ultra shaft pipe of HDPE material having height of 460mm,having R.C.C.cover and frame fixing in150 mm thick in C.C.1:2:4,having crushed sand bed of 150mm thick of size 750mm dia.Including excavation and refilling the sides of chamber by sand crushed cushioning 150mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete. Spec.As directed by Engineer in charge.

Item No.155. Providing and laying 100mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. Spec. No.Bd.V.39, Page No.573.

Item No.156. Providing and laying for 150mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. Spec. No.Bd.V.39, Page No.573.

Item No.157. Providing and fixing ISI 1729/2002 grade 75 mm dia Cast Iron Waste Water Pipe with lugs necessary fittings such as bends,tees,single junction,double junction,slotted vent,offsets on wall or into the ground including filling joints with cement mortar1:2 proportion fixing on wall by means by galvanised Mild Steel bracket of 30x5 mm plate and 8 mm square rod with Galvanised Iron clamp with washer as per design drawing and as directed to keep pipe 50mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of gray oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky. Spec. As directed by Engineer in Charge.

Item No.158. Providing and fixing ISI1729/2002 grade 100mm dia Cast Iron Soil Pipes With lugs including plug bend necessary fittings such as bends,tees,single junction, double junction,slotted vent,offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means of galvanised Mild Steel bracket of 30x5mm plate and 8mm square rod with Galvanised Iron clamp with washer as per design,drawing and as directed to keep pipe 50mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of white oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky. Spec. As directed by Engineer in Charge.

Item No.159. Providing and fixing 45cm wide stainless steel ladder of 40mm x 6mm stainless steel flat stringers and steps of 18 mm dia. stainless steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm complete. Spec. As directed by Engineer in charge.

Item No.160. Transportation of materials obtained from excavation including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 50 km inclusive, from the site of excavation to the site of deposition as directed. Spec. As directed by Engineer in charge.

Item No.161. Providing & fixing C.I. Manhole covers with frames / rings for R.C.C., underground water storage tanks/Over Head tank, sizes of covers. (600mm dia.) Note : Cover should be provided with locking arrangement. Spec. As directed by Engineer in charge.

Item No.162. Providing and fixing matt finish Stainless Steel Lettering (full & half letters) of heights 45 cm high for the name PURATAN in English & Marathi including all material, labour, cleaning etc. complete. Spec. As directed by Engineer in charge.

Item No.163. Providing and fixing Brass Individual Quarter Number Plate of size 0.15 x 0.15 mtr to each quarter as per desing and drawing etc. complete. Spec. As directed by Engineer in charge.

Item No.164. Providing and fixing colour coated, wall mounted metal letter box of size 0.25 x 0.30 mtr with locking arrangement as per desing and drawing etc. complete. Spec. As directed by Engineer in charge.

Item No.165. Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer in charge. Note : 1) The elevational area of the scaffolding shall be measured for payment purpose. 2) The payment will be made once only for execution of all items for such works.

Item No.166. Providing & fixing in position TV unitof size 2700 x 450 x 2400 mm ht. with 6 nos drawer on telescopic channel hettich make in base unit with 18mm ,12mm, 8mm thk waterproof plywood make green ply / merino , 4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.167. Providing & fixing in position double bed of size 1950 x2100 x450 mm ht with 2 nos trollys on telescopic channel hettich make, ,cushion headboard with fabric ht at 900mm with 18mm ,12mm, 8mm thk waterproof plywood make green ply ,4 mm thk veneer finish with melamine polish /pu paint finish & internally 1 mm thk white laminated merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.168. Providing & fixing in position side table of size 450 x 450 x 450 mm ht with 1 drawer on telescopic channel hettich make & open box below,unit on wooden leg at 150 mm with 18mm ,12mm, 8mm thk waterproof plywood make green ply, 4 mm thk veneer finish with melamine polish / pu paint finish & internally 1 mm thk white laminated merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.169. Providing & fixing in position wardrobe of size 1200 x600 x2400 mm ht with swing shutter, 18 mm thk ply shelve with laminated finish , drawer on telescopic channel hettich make & 1100 mm ht wooden handel with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish / pu paint finish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.170. Providing & fixing in position wardrobe cum TV unit of size 1200 x600 x2400 mm ht with swing shutter, external drawer on telescopic channel hettich make & 1100 mm ht wooden handel with 18mm ,12mm,8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish / pu paint finish & internally 1 mm thk white laminated merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.171. Providing & fixing in position wardrobe of size 1200 x600 x2400 mm ht with swing shutter, 18 mm thk ply shelve with laminated finish , drawer on telescopic channel & pullout on soft close channel hettich make & 1100 mm ht wooden handel, decorative panel with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish / pu paint finish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.172. Providing & fixing in position dresser unit of size 900 x450 x2400 mm ht with mirror on shutter aluminium profile ,2 drawer on telescopic channel hettich make & space for puffy with 18mm,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish / pu paint finish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.173. Providing & fixing in position double bed of size 1950x2100x450 mm ht with 2 nos trollys on telescopic channel hettich make ,leather finished cushion headboard with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino make with extended headboard as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.174. Providing & fixing in position wardrobe of size 2400 x600x2400 mm ht with sliding shutter sliding fitting hettich make & profile handel with 18mm ,12mm, 8mm thk waterproof plywood make green ply,drawer on telescopic channel & pullout on soft close channel hettich make,4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.175. Providing & fixing in position TV unit cum study table, over head unit of size 2400x500x2400 mm ht with top open able shutter in glass ,drawer base unit with 2 drawer on soft close channel hettich make with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.176. Providing & fixing in position double bed of size 1950 x2100 x450 mm ht with 2 nos trollys on telescopic channel hettich make ,cushion headboard with fabric ht at 900mm with 18mm ,12mm, 8mm thk waterproof plywood make green ply ,4 mm thk veneer finish with melamine polish /pu paint finish & internally 1 mm thk white laminated merino /green lam make with extended headboard as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.177. Providing & fixing in position wardrobe of size 2400 x600x2400 mm ht with glass acrylic finish sliding shutter & sliding fitting hettich make & profile handel with 18mm ,12mm, 6mm thk waterproof plywood make green ply,drawer on telescopic channel & pullout on soft close channel hettich make,4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.178. Providing & fixing in position TV unit cum study table of size 1800 x500 x 2400 mm ht drawer base unit with 2 drawer on soft close channel hettich make with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino make with ply back panelling as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.179. Providing & fixing in position double bed of size 1950 x2100 x450 mm ht with 2 nos trollys on telescopic channel hettich make ,cushion headboard with fabric ht at 900mm with 18mm ,12mm, 8mm thk waterproof plywood make green ply ,4 mm thk veneer finish with melamine polish /pu paint finish & internally 1 mm thk white laminated merino /green lam make, ply back paneling with headboard as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.180. Providing & fixing in position wardrobe of size 2400 x600x2400 mm ht with back painted glass finish sliding shutter & sliding fitting hettich make & profile handel with 18mm ,12mm, 8mm thk waterproof plywood make green ply,drawer on telescopic channel & pullout on soft close channel hettich make,4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.181. Providing & fixing in position TV unit cum study table of size 2400x500x2400 mm ht, over head unit with top open able shutter in glass , drawer base unit with 2 drawer on soft close channel hettich make with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish /pu paint finish& internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.182. Providing & fixing in position display cum file rack of size 3400 x 450 x 2400 mm ht. with drawers on telescopic soft close channel hettich make & swing shutter with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish /pu paint finish& internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.183. Providing & fixing in position TV unit of size 3200x300x3150 mm ht drawer base unit with 2 drawer on telescopic soft close channel hettich make with 18mm ,12mm, 8mm thk waterproof plywood make green ply,4 mm thk veneer finish with melamine polish /pu paint finish& internally 1 mm thk white laminated merino make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.184. Providing & fixing in position working table of size 2400 x 900 x 800 mm ht. with italian marble finish on front panel ,18mm waterproof plywood with 3.5/4mm thk veneer finish with melamine polish/pu paint finish with 12mm thk toughned glass on top & 140mm ht drawer with telescopic channel hettich make (3 nos.) and 12mm waterproof plywood for front ,back and bottom panels and 8mm waterproof plywood for side panels with 1mm thk laminate finish merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.185. Providing & fixing in position Conference table size 1250 x 3746 x 750 mm ht. with 12 mm thk toughned glass on top & 18mm thk waterproof plywood make green ply / merino , 750 mm height wooden legs , seasoned teak wood wooden framing of size 125x125 mm, 4 mm thk veneer finish with melamine polish merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.186. Providing & fixing in position Console unit size 2250 x 450 x 750 mm ht. with swing shutter on hinge & 2 nos drawer on telescopic channel hettich make with 18mm ,12mm, 8mm thk waterproof plywood make green ply / merino , 4 mm thk veneer finish with melamine polish & internally 1 mm thk white laminated merino /greenlam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.187. Providing & fixing in position single bed of size 1000 x1950 x350 mm ht. with storage with 18mm ,12mm, 8mm thk waterproof plywood make green ply ,4 mm venner laminated finish & internally 1 mm thk white laminated merino /green lam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.188. Providing & fixing in position wardrobe of size 1000 x600 x 2400 mm ht. with 18mm ,12mm, 8mm thk waterproof plywood make green ply ,4 mm thk veneer laminated finish & internally 1 mm thk white laminated merino /green lam make as per detailed drawing and design etc.complete. (B.W.P grade plywood)

Item No.189. Providing & fixing Modern Metal Planter of 815 mm height & 300 mm dia.made in stainless steel and enhanced magnificently with plain finish on top and hammered design in the bottom ,add glamour to your interiors with this accent planter as per detailed drawing etc. complete. Code : CM034 or equivalent (HT -815 MM, Dia- 300 MM) (Basic rate of planter Rs.19000)

Item No.199. Providing & fixing Rug in Fabric material size of 1360 x 1150 mm as per detailed drawing etc. complete. Code: IR08 or equivalent (Basic rate of rug Rs.46000)

Item No.220. Providing, fabricating and erecting at site of work the tubular steel structure as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade complete. Spec. As directed by Engineer in charge & B-18 Page No.78.

Item No.221. Providing & fixing Bottom wheels etc. complete. Spec. As directed by Engineer in charge

Item No.222. Providing & fixing M.S. Hinges etc. complete. Spec. As directed by Engineer in charge.

Item No.223. Providing & fixing 300mm long M.S. Aldrop etc. complete. Spec. As directed by Engineer in charge.

Item No.224. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc.columns as per detailed designs and drawing or as directed including Steel centering formwork,cover blocks laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate. (Crushed sand VSI Grade) Spec. No.Bd.F.3 Page No. 298 and B.7, Page No.38 (Cement bags 8.0 bags/Cum)

Item No.225. Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C.pardi of required thickness including steel centering, formwork, coverblocks, laying /pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc.complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.Bd.F.11 Page No. 304 and B.7, Page No. 38 (Cement bags 8.0 bags/Cum)

Item No.226. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1kg percement bag curing the same for not less than 2 day sand keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec. No. Bd.L.7 Page No.369. (Use Natural sand) For Compound wall, Security cabin & GSR.

Item No.227. Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary , and watering the surface for two days etc complete. Spec. As directed by Engineer in charge. For Compound wall & GSR.

Item No.228. Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. Spec. As directed by Engineer in charge.

Item No.229. Providing and laying in position Noise barrier of approved shade including outside sheet plain aluminum alloy sheet 1.2 mm thick , Inside sheet (Traffic / source side) Skin 1.2 mm thick Aluminum alloy perforated sheet with 42% open area with 5 mm hole ,Approx 12.5 kg /Sq.m acoustic material polyester fiber, in two layers of 50 mm thick density 60 kg/m3 ,Each panel having tong & groove to joint perfectly with each other,The panel and structure having gaskets at the joint to block noise leakage.The structure is of H profile in which acoustic panel slides longitudinally . Top cover: - all acoustic panel covered at top with top cover made of Aluminum alloy riveted to panel.Powder coating all metallic surface / parts are powder coated, the minimum thickness is 60 Mu. The STC rating is 36.etc. complete. Spec. As directed by Engineer in charge.

Item No.230. Providing and installing in position Boom barrier of approved, maximum length of boom 6m (expandable upto 8 m) ,boom rest stand ,aluminium arm material ,time for up/down 2s (for 1- 3 m), 6s (for 4 - 6m) dry contact input control signal, IP54 ingress protection degree,Input interface for photocell & air switch,upto 25 m remote control,incorporated control panel with 3 push buttons (stop/up/down) to control the motor & 1-80s auto closing time.etc complete. Spec. As directed by Engineer in charge.

Item No.231. Providing expansion joints in R.C.C. framed structure (exterior columns) with plain premoulded filler 25mm thick and 3mm thick alluminium plate, hold fast, fixing T.W. battens on internal face, finishing etc. complete. Spec. No. Bd.K.1 Page No. 359.

Item No.232. Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.Bd.V.41, Page No. 573.

Item No.233. Providing and fixing Ductile iron Manhole Covers / Strom Water Grating and Grating with frame of Various sizes, weight and type sand load bearing capacity as per EN-124, equivalent NECO. Spec. As directed by Engineer in charge.

Item No.234. Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Spec. MORTH 301

Item No.235. Providing earth work in embankment with approved material obtained from other sources upto lead of 50 m.including all lifts, laying in layers of 20 cm.to 30 cm.thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete (Material obtained from Other sources) Spec. No. MORTH 305

Item No.236. Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. By Mix in Place Method and Grading - III Material. Spec. No. MORTH 401.

Item No.237. Wet Mix Macadam - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including pre mixing the Material with water at OMC in mechanical miplant carriage of mixed Material by tipper to site,laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. Spec. No. MORTH 406.

Item No.238. Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate (natural sand/VSI grade finely washed crushed sand) conforming to IS:383, the size of coarse aggregate not exceeding 25 mm,cement content not to be less than 150 kg/cum,optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7days, mixed in a batching plant / Weigh batch mixer,transported to site with all leads and lifts,laid with a paver with electronic sensor/by suitable means as approved by Engineer-in-charge, compacting with vibratory roller,finishing,curing and including preparation of sub-grade surface if required etc. complete. Spec. No. MORTH 601.

Item No.239. Providing and laying in situ cement concrete M-45 with tremix treatment for 300 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate (VSI grade finely washed crushed sand) etc. complete. Spec. MORTH 602 (Cement bags 9.0 bags/Cum)

Item No.240. Providing and casting in situ or precast tapering R.C.C.M-20 Kerb without gutter (as per IRC 861983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M.1:2,setting the same in C.M.1:2 , including the required excavation in any strata and removing the excavated stuff anywhere in city and re doing the surface. Using Concrete Batching and Mixing Plant. Spec. As directed by Engineering in charge.

Item No.241. Providing and fixing screw down for 50mm dia. C.P. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.Bd.V.9 Page No.555 For Water supply work.

Item No.242. Providing and laying in trenches 50mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.Bd.V.5 Page No. 551.

Item No.243. Providing and laying in trenches 65mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.Bd.V.5 Page No. 551.

Item No.244. Providing and laying in trenches 80mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.Bd.V.5 Page No. 551.

Item No.245. Providing 75/80 mm double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support. Spec. As directed by Engineer in charge. Butterfly valve-PN-1 (With by pass arrangement)

Item No.246. Providing and supplying 40 mm Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Spec. As directed by Engineer in charge. Air Valve Single Ball Flanged / Screwed Type -PN-1

Item No.247. Providing and supplying 25 mm Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Spec. As directed by Engineer in charge. Air Valve Single Ball Flanged/Screwed Type - PN -1

Item No.248. Providing & fixing 80mm Strainer etc. complete. Spec. As directed by Engineer in charge.

Item No.249. Providing and supplying ISI mark 50mm dia. CI D/F reflux valves (non-return valves) including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN -1 Spec. As directed by Engineer in charge.

Item No.250. Providing and supplying ISI mark 80mm dia. CI D/F reflux valves (non-return valves) including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN -1 Spec. As directed by Engineer in charge.

Item No.251. Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. As directed by Engineer in charge.

Item No.252. Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. Spec. As directed by Engineer in charge.

Item No.253. Providing and supplying 50 mm Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Spec. As directed by Engineer in charge. Air Valve Single Ball Flanged/Screwed Type - PN -1

Item No.254. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3m.) By Mechanical Means. Spec. No.Bd.A.1 Page No. 259 (For Rain water Harvesting pits)

Item No.255. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No. Bd.F.8 Page No.302 and B.7, Page No.38 (Cement bags 8.0 bags/Cum)

Item No.256. Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 200mm dia. conforming to IS:12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths. Spec.As directed by Engineer in charge.

Item No.257. Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete. Spec. As directed by Engineer in charge.

Item No.258. Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete. Spec. As directed by Engineer in charge.

Item No.259. Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete. Spec. As directed by Engineer in charge.

Item No.260. Providing and fixing 350 x 350 mm MS grating to opening in the harvesting pit and chamber etc. complete. Spec. As directed by Engineer in charge.

Item No.261. Providing RCC Chamber Cover with Grating for chamber size 600 x 600 etc. complete. Spec. As directed by Engineer in charge.

Item No.262. Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frame of any size over inspection chamber etc. complete. Spec. As directed by Engineer in charge.

Item No.263. Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. Spec. As directed by Engineer in charge.

Item No.264. Providing & fixing Air vent 100 mm dia. etc. complete. Spec. As directed by Engineer in charge.

Item No.265. Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Spec. No. Bd.A.12 Page No.264.

Item No.266. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.Bd.F.5 Page No. 300 and B-7, Page No 38. Up to plinth Level. (Cement bags 8.0 bags/Cum)

Item No.267. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.Bd.F.5 Page No. 300 and B-7, Page No 38. Above plinth Level. (Cement bags 8.0 bags/Cum)

Item No.268. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38. (Cement bags 8.0 bags/Cum) Up to plinth Level.

Item No.269. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38. (Cement bags 8.0 bags/Cum) Above plinth Level.

Item No.270. Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.Bd.F.9 Page No. 303 and B.7, Page No.38. (Cement bags 8.0 bags/Cum)

Item No.271. Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of required size in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including, striking joints, racking out joints watering and scaffolding etc.complete. Spec. As directed by Engineer in Charge. For Security Cabin

Item No.272. Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane asapproved by Engineer incharge,followed by 112mm thick brick bat coba covered with 20mm mortar finish.If the reare cracks on the bare slab,open the crack in VGroove and fill it with ready to use repair polymermodified mortar based on special cements,aldehydebasedpolymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be groute dasper the instructions of site in charge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious water proofing coating having a non-toxic, 2-(methoxy carbonyl)-1 propene - Butyl 2 propenoate (MPBP) based polymeric waterproofing solutionas approved by Engineer in charge. Provide and lay 112mm average thickness of brick bat coba in cement mortar 1:5 over 12mm thick CM1:3 bedding with one pouch of 330grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kilogram bag of cement and finishing with 20mmthick cement plaster in cement mortar 1:3 by mixing one 330gram spouch of above admixture per 50 Kilogram bag of cement, including all lead, lifts and laid to proper slope to drain of water entirely preparing bell mouth including watta, etc. complete. Spec. As directed by Engineer in charge. For Security Cabin.

Item No.273. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Spec. No. Bd.L.2 Page No.368. (Use Natural sand) For Security Cabin.

Item No.274. Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec. As directed by Engineer in charge. For Security Cabin.

Item No.275. Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface including the primer coat etc. complete. Spec. No.Bd.P.6 Page No.414. For Security Cabin.

Item No.276. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paintshould decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide and Absorbs CO2 (4.8 kg/15 l) plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Spec. As directed by Engineer in charge. For Security Cabin.

Item No.277. Providing & fixing solid core flush door in single / double leaf 35mm thick decorative type of exterior grade as per detailed drawing & design including approved mica face on both face (1.5mm thick), fittings, Brass oxidised fixtures (Aldrops, Handles, Tower bolts, Hinges) of approved make and size as specified in the drawing including all necessary beads, moulding, lipping, french polish etc. complete. (without door frame) Spec. No. BD-T-34 Page No.499 For Security Cabin.

Item No.278. Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25mm at weight 0.417 kg/Rmt. as per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain / opaque glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc., complete. With colour Anodising with box. Spec. As directed by Engineer in charge. For Security Cabin.

Item No.279. Providing and laying telephone black/Amba White/Cadbury brown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/window boxing etc.on C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Spec. As directed by Engineer in charge. (Basic rate of Granite = Rs. 2518.00/Sq.m. inclusive of polishing, transportaion, etc. complete.) For Security Cabin.

Item No.280. Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No.Bd.U.1 Page No. 537. For Security Cabin.

Item No.281. Providing and laying concrete pipes of I.S.NP. class of 250mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.Bd.V.41, Page No. 573.

Item No.282. Constructing brick masonry circular manhole 1.22 m internal dia. at bottom and 0.56 m dia. at top in cement mortar 1:4 (1 cement, 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement,3 coarse sand, 6 graded stone aggregate 40 mm nominal ) and making necessary channel in cement concrete 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design.1.68 m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560 mm internal dia conforming to IS:12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) with sewer bricks conforming IS:4885. Spec.As directed by Engineer in charge.

Item No.283. Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Below 3.0m) By Mechanical Means Spec. No.Bd.A.2 Page No. 259 (For GSR)

Item No.284. Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. Spec. As directed by Engineer in charge. For GSR.

Item No.285. Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec. No.Bd.J.2 Page No.355. For GSR

Item No.286. Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec. No.Bd.J.2 Page No. 355. For GSR.

Item No.287. Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. Spec. As directed by Engineer in charge. For GSR.

Item No.288. Providing 80mm double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Spec. As directed by Engineer in charge. Sluice valves - PN -1 without byepass arrangement.

Item No.289. Supply of 80mm C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tail piece) suitable for making flanged connection with the plainbarrel of C. I. Spun Pipes (as per - IS - 1536 /2001) and D. I.Pipes ( as per IS: 8329 / 2000). The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material,freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. Spec. As directed by Engineer in charge.

Item No.290. Providing & fixing C.I. Manhole cover 50 kg. Heavy (0.9 x 0.45m) etc. complete. Spec. As directed by Engineer in charge.

Item No.291. Providing & fixing C.I. Man hole cover (0.45 x 0.30m) etc. complete. Spec. As directed by Engineer in charge.

Item No.292. Providing and fixing Sewage Treatment Plant of 150 KLD (excluding excavation, backfilling & disposal of surplus earth civil construction work) Inlet Parameters - PH - 6.5 to 8.5, (COD, mg/l : 500-600 mg/l), BOD, 5 days @ 20 deg.C, mg/l : 250-300 mg/l, Total Suspended solids, mg/l : 300 mg/l, (Oil & grease, mg/l) : <50 mg/l, Total coliform - 10000000 MPN/100 ml. Output Parameters (after Tertiary filtration system) - PH - 7 to 8, (COD, mg/l : Less than 50), (BOD, 5 days @ 20 deg.C, mg/l) : Less than 10, Total Suspended solids, mg/l : Less than 10, (Oil & grease, mg/l) : <10 mg/l, Total coliform - 1000 MPN/100 ml. Sewage feed pump - Kirloskar make single stage, horizontal, centrifugal, submersible cutter pump type sewage feed pump, coupled motor, 50 hz frequency, 3 No. of phases, 1.5 kw power, 10-12 m head, 8-10 cum/hr flow & material of construction cast iron impeller, cast iron delivery casing, carbon steel shaft, bronze shaft sleeve. Air Blower - Airvak make twin lobe root blowers, oil cooled cooling, 150 cum/hr capacity, 0.45 kg/cm2, 1200 RPM blower speed, V-belt type motor driven. Material of construction of body, rotor, plates - CI FG 260 IS:210, EN-19 BS 970 shaft, 20 Mn Cr 5 hardened & ground gears, Accessories-NRV, PRV, Reactive type suction & discharge air filter, pressure gauge, V-Belts, Foundation Bolts, V-Belt Guard,crompton make squirrel cage type motor - 7.5 hp power, 50 hz frequency, IP 54 protection category. Air Diffusers - Aeroflux make tubular type air diffusers using uniform air distribution and creating fine bubbles for better oxygen transfer.capacity of diffusers 5-7 cum/hr and size of diffusers - diameter 64 mm, length 1000 mm. Biological Culture - Dormant, Saprophytic (Specially Isolated) type biological culture to develope biological culture in aeration tank. Recirculation/ Sludge Transfer Pump - Kirloskar make single stage, horizontal, centrifugal, self-priming, end suction coupled pump type Sludge Transfer Pump, coupled motor, 50 hz frequency, 3

Item No.298. Supplying & erecting mains with 2 x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No. WGMA/BW

Item No.300. Supplying & erecting mains with 2 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No. WGMA/BW

Item No.301. Supplying & erecting mains with 1 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No. WGMA/BW

Item No.302. Supplying & erecting mains with 2 x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole/Bus bars or any other places. as per specification No: WGMA/BW

Item No.303. Supplying & erecting mains with 2 x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No. WGMA/BW.

Item No.310. Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Item No.311. Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.

Item No.318. Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Item No.329. Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

Item No.330. Supplying and erecting LED Mirror Light with integrated driver including 14W to 18W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.

Item No.350. Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 7 to 8 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply.

Item No.351. Supplying and erecting double pole switch surface type/ flush type 240V, 32A with indicator lamp & fuse as per specification no. SWSWR/ BDP.

Item No.363. Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Item No.364. Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron / GI frame as per Specification No. SW-SWR / MCCB.

Item No.365. Supplying, fixing and commissioning 2 pole, RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SWRCCB/RCBO

Item No.366. Supplying, fixing and commissioning 2 pole RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 32A/40A as per specification no SW-RCCB/RCBO

Item No.378. Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.380. Supplying, erecting & terminating XLPE armoured cable 4 core 16sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.381. Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Item No.383. Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.

Item No.384. Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Item No.390. Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40mm dia. copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Item No.391. Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. (Lift 0 to 1.5 M)

Item No.396. Supplying and erecting LED frame light made from anodised alluminium tubular enclosure with 2 Nos. LED lamps of 3 to 5 W.

Item No.405. Supplying & laying HMS PVC conduit 32 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Item No.406. Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Item No.408. Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Item No.422. Supplying & erecting on line UPS pure sine wave of 3 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS.

Item No.423. Supplying & erecting Distribution board for incorporating 5 way splitter, along with the splitter.

Item No.424. Supplying and installing, testing & commissioning of digital (hybrid) type EPAX of 50 extensions complete.

Item No.430. Supplying & erecting 43 inch HD LED TV

Item No.436. Point wiring for light/fan/bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW

Item No.443. Supplying and erecting aluminium strip of required sizes (50 x 6 mm) used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EAEP.

SOLAR WATER HEATING SYSTEM Item No.444. Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity complete. Specification no. ESD-SHWS-ETC.

Item No.449. Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.

Item No.450. Providing and fixing C.P. Angular stop cock with wall flange of approved make continental including necessary sockets/unionnutetc.complete.

Item No.451. Providing and fixing screw down 15mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete.

Item No.455. Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification No. EA-MOBI

Item No.461. Supplying and erecting RCC chamber cover with frame 60cm x 45cm medium duty 100kg with lifting arrangement including laying of angle iron frame of angle size as 50 x 50 x6 mm to be fixed / embedded on top of chamber complete.

WATER PUMPS Item No.462. Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per Specification No. SWSWR/MCB

Item No.463. Supplying, erecting & marking TPN MCB 6A to 32A, C- series in provided distribution board as per specification no. SW-SWR/MCB

Item No.464. Supplying and erecting GI sheet 1.6mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Item No.469. Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Item No.470. Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL.

Item No.473. Supplying and erecting aluminium strip of required sizes (50 x 6 mm) used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EAEP.

Item No.474. Supplying & erecting Water lavel controller 230/ 415V AC., Four way for under ground & Over head tank operation.

Item No.476. Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible / centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Item No.477. Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set upto 10 - 15 HP consisting of Star Delta starter having relay range 13-22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Item No.478. Supplying and erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 3.75 KW/5 HP with discharge 2/4.1 Litres per second (LPS) for head of 36/52 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

Item No.479. Supplying and erecting submersible pumpset of 10.44 KW/14 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 275 LPM discharge at 100 m head & discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps.

Item No.486. Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq.mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL.

Item No.490. Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Item No.491. Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 20 mm dia with necessary fittings complete as per specification no. FF-PP

Item No.496. Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Item No.497. Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS.

Item No.498. Supplying and erecting 150 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS.

Item No.499. Supplying and erecting 200 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS.

Item No.505. Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Item No.506. Supplying & erecting gun metal gate valve of size 20 mm dia complete as per specification no. FF-VL/GV

Item No.507. Supplying and installing wall mounting swinging Hose reel drum fitted with 19mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV.

Item No.508. Supplying fire fighting controlled percolation (C.P.) Hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH.

Item No.521. Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.

Item No.526. Supplying, installing, testing and commissioning of conventional LPG / CNG gas leak detectors with relay output including mounting base & required accessories.

VRF AIR CONDITIONING SYSTEM Item No.540. Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Item No.541. Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Item No.547. Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

Item No.553. Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.

Amount