SPL REPAIR TO 11 BATHROOMS TOILETS AND STORE BLOCK OF (BLDG NO P15, T26, P29L (A AND B), T32L, T35, T36, P60, T16 (01 BATHROOM AND 01 STORE) AND T04 OF MH GAYA, PROVN OF 01 OPG ROOM (SIZE 6 MTR 3.50 MTR) AT MDC GAYA

Amount

Taking down cement plaster any description on brick or stone walls or ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L for rendering 10mm thick internal surfaces on brick work in cm (1:6) in and finishing surfaces even and fair without using extra cement complete all as specified and directed

M & L for rendering 10mm thick on internal surfaces on brick/concrete in CM (1:3) finished even and smooth without using extra cement as in ceiling complete all as specified and directed

M & L for rendering 15mm thick in two layers on external surfaces on brick/concrete in CM (1:4) finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly

Supply only liquid water proofing compound

M&L preparing Old plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

M&L preparing newly plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

M&L preparing Old plastered surfaces of Ceiling and applying complete wall with 1.0 mm thick putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

M&L preparing newly plastered surfaces of Ceiling and applying complete wall with 1.0 mm thick putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

Preparing Old plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed

Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed

Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 25 mm thick PCC (1:2:4) (12.5mm graded agreegate ) type B0 in levelling course of floor complete all as specified and directed

M & L for non skid ceramic coloured tiles (square/ rectangular) polished, area of each tiles not less than 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick screed in CM (1:4) complete all as specified and directed Notes : Shade of the tile including colour, design and pattern shall be approved by AGE

M&L for glazed ceramic coloured tiles in verticle surface 450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in (1:4) complete all as specified and directed Notes : Shade of the tile including colour, design and pattern shall be approved by AGE.

S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). all as specified and directed

Taking down chowkhats or frames exc 1.5 Sqm ( without taking shutters from the frame) all as specified and directed

S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing all as specified and directed

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed

S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed

S & F Solid PVC Door frame size 50mmx 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube and fixing in opening complete all as specified and directed

S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing complete all as specified and directed

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed

S&F barrel tower bolts stove enamelled black of size 150 mm complete all as specified and directed

S&F 125mm long aluminium anodised handles or extruded section complete all as specified and directed .

S & F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed

M&L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membran comprssing of following for non-approachable roof:- (i) Removal of existing roof treatment and cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv) Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, with rubber ring joints and solvent fixed to walls including mild steel 25 x 3 mm brackets complete all as specified and directed by Engr-in-charge.

S & F 110mm dia bore PVC (SWR) bends and fixed with pipe with solvent complete all as specified and directed

S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes complete all as specified and directed

S&F in repair vitreous china wash basin , white , flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including stand,brackets,waste coupling,grating complete all as specified and directed

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover etc complete all as specified and directed .

S & F in repairs of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests but incuding flush pipe and connection to the flushing cistern complete all as specified and directed . ( Note : Flusing cistern shall be paid seperately)

S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed

S & F of vitreous china urinal, half stall type, white incl providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and union for discharge pipe complete all as specified and directed

S & F in repairs 5mm thick urinal divider figured glass partion terminating about 40cm above floor line complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15mm dia stop valve / Angle valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed

S&F in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' woth long shanks and flynuts, screwed for iron pipe complete all as specified and directed

S & F of 600 x 450mm bevelled edge mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&Fin repair brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etc complete all as specified and directed

S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

M&L 75mm PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed

S & F in repair coloured toilet paper holder,vitreous china box type fixed to wall with chromium plated brass screws complete all as specified and directed

S & F in repairs CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete all as specified and directed

S & F in repairs CPVC pipes 16 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete all as specified and directed

S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed

Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair all as specified.

M & L for 20mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes finished even and rough complete all as specified and directed

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M & L for providing cement concrete cas in situ (1:2:4), type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed

S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed

S & F 75 mm dia bore PVC (SWR) bends any radius complete all as specified and directed

S & F 110 mm dia bore PVC (SWR) bends any radius complete all as specified and directed

M&L Cutting into existing manholes 110mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required complete all as specified and directed,

M&L for Cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) 75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 38 mm wide inserted in position complete all as specified and directed

Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed

S & F of Pre-painted galvalume aluminum zinc coating AZ-150 GI based tile profile galvalum sheet 0.50mm thick of red colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape fixed with self tapping screws complete all as specified and directed

Prepainted galvanume aluminium zine coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified and directed

S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc nd similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed

M&L two coat of synthetic enamel paint over old wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

M & L for Brick work with sub class ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

M & L for Brick work with sub class ‘B’ bricks,straight or curved on any radious in half brick thick walls, built in, built in CM (1:4) complete all as specified and directed

S&F in repair 20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed

M&L For Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

Surface excavation not exceeding 30cm deep and averaging 15cm deep getting out in hard / dense soil for foundation etc.

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in Hard /dense soil complete all as specified and directed.

All are as per item no 77 above but exceeding 1.5 meter in depth not exceeding 3.0 meter in depth and getting out in Hard /dense soil complete all as specified and directed.

M & L for Cement concrete type D2 (1:4:8) using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

M&L For RCC M-25 Design mix using 20 mm graded stone aggregates as in beams, cantilevers, bed block, bressummers, lintels over 1.5m span, including necessary form work etc. Complete al as specified and as directed.

M & L for RCC design mix M-25 using 20 mm graded stone aggregates in foundations, footing, plinth beams, bases for columns and mass concrete (reinforcement to be measured separately) complete all as specified & directed.

All are as per item no 81 but in column complete all as specified and directed

M & L for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete all as specified & directed.

All as per item no 85 above but sides of square column fair finished surface complete all as specified and directed .

Form work to sofit of suspended slabs such as roof slabs,landings & similar work not exc 200mm thick(Horizontal of sloping) rough finished surfaces of concrete flat complete all as specified & directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.

Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed

M & L for Brick work with sub class ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

M & L for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on concrete surfaces of ceiling surfaces in cement mortar (1:3), and finish the surface even and smooth without using extra cement all as specified and as directed

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement complete all as specified and directed

S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed be in C:M (1:4) complete all as specified and directed Notes : Shade of the tile including colour, design and pattern shall be approved by AGE

S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, Verticle surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendiring in C:M (1:4) as in backing coat complete all as specified and directed Notes : Shade of the tile including colour, design and pattern shall be approved by AGE.

S&F 5mm thick tinted glass in aluminium doors & windows with rubber packing including hacking out old broken glass complete all as specified and directed by engr in charge. ( any thickness, size from aluminium beading )

M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed

S&F 10mm thick X ray Lead transparent sight glass complete all as specified and directed

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F pressed steel frames 105x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed

M&L Plain Cement Concrete (1:3:6) type C1 filling of pressed steel frame and hold fast block etc.complete all as specified and directed

S&F 2nd class hardwood factory made 40 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified and directed

S&F powder coated 40-60 mm Lead lined door GI sheet having infill of puff/rockwool conjuction with lead sheer of 2mm and size of door 2100mm x 1200mm including all necessary fitting complete all as specified and directed .

M&L 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed

S & F Continuous (piano) 30mm width hinges, mild steel, bright finish or electro galvanised, complete all as specified and directed

S&F floor door stopper 140 mm of aluminium alloy body and tongue anodised with hard drawn steel spring complete all directed

S&F 75mm long aluminium anodised handles or extruded section complete all as specified and directed

S&F plastic body door catcher/drawer magnet complete all as specified and directed

S & F Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

EM PORTION

M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed.

(a) One light/fan point controlled by one No piano type switch 5 AMPS single pole one way all as specified and directed

(b) One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board all as specified and directed

S&F for 3 pin socket outlet point 15 Amps independent, with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FRLS copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed

Description all as per item No. 5 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) all as specified and directed

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

S &F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed.

M&L for socket outlet 3/5 pin 5Amp flush type complete all as specified and directed.

M&L Switch socket comination multipurpose 2 in 1,5 and 15 Amp Flush type ISI Marked complete all as specified and directed.

M&L ceiling rose , 3 terminal polycarbonate complete all as specified and directed

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps suitable for MCCB 125 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix 4 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and as directed.

S&F of MCB SP 30 to 40 Amps 240 volts complete all as specified and directed.

M&L for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively) all as specified and directed

M&L of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35sqmm 3.5 core all as specified and directed

Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified.

Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed.

Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed.

Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed.

Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed.

MAA BHAGWATI TELECOM LINK (BID ID -3446273)

UMESH SINGH (BID ID -3448514)