Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.7 L+₹1.8 L (5.00%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹38.4 L+₹2.5 L (6.93%)Rejected-Finance | L3 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹87,500
Closing Date
26 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
SPL REPAIR TO BLDG NO P-642 AND CERTAIN MW AND RW AT MIL STN SRI GANGANAGAR
2023_MES_616269_1
GE SGNR/TOK-41 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and b(i) and for un-enlisted, refer NIT para
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹87,500
Yes
2 Nov 2023
29 Aug 2023
28 Sept 2023
29 Aug 2023
26 Sept 2023
12 Sept 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.
M&L glazed ceramic coloured digital tiles (300x600)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
Demolition of cement Concrete(un-renforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L for 25mm thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.
M&L for vitrified ceramic tiles light shade 7 to 8 mm thick (square/rectangular) size of the area of each tile n exc .36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 7.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.
M&L machine cut Kota stone slab flooring 20-25 mm thick over 20 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing, rounding of edges (moulding of edges) and mirror polishing complete all as specified and directed by Engineer - in - Charge.
All as per above item No-7 but in vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
Supply only Water proofing compound complete all as specified and directed by Engineer - in - Charge.
M&L for PCC 1:2:4 type B1(20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer - in - Charge.
Providing and applying waterproofing work with APP membrane sheet of thickness 3mm by Mechanically clean the RCC slab and wall with wire brush / coir brush to freee from all loose materials like dust, dirt etc make wattah / coving of 50x50 mm at all horizontal and vertical joints to avoid right angle turning. Apply one coat of solvent based bitumen primer on cleaned & leveled surface @ 3-5 Sqmtr / ltr per coat. Unroll the Dr. FIxit Torchshield roll after application of primer. Align the Dr. FIxit Torchshield roll correctly & re-roll it in alignment before torching. Use gas burner to heat substrate and underside to softening points. When the embossing disappers, roll forward and press fimly against substrate to bond from the lower end towards the higher end. Keep overlap margin for minimum 100mm. Heat both the overlaps and use round tipped trowel to seal overlap. Excess compound shold be smoothened and pressed into seam using hot trowel complete all as specified and directed by Engineer - in - Charge.
M&L for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of cruide oil by weight of cement complete all as specified and directed by Engineer - in - Charge.
Dimolition of Brick tiles or terracing tiles , single layer on roofs complete all as specified and directed by Engineer - in - Charge.
Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plaster complete all as specified and directed by Engineer - in - Charge.
Dismantling water tank capacity exc 500 Ltr and n exc 1000 ltr complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered white colour (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge.
S & F for 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S & F for 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.
S & F of Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directed by Engineer - in - Charge.
S & F of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.
S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer - in - Charge.
S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.
S&F Aluminum Grill powder coated of approved design/pattern with aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5sqm but n.exc 4.0sqm each complete all as specified and directed by Engineer - in - Charge.
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 125x60mm with 1.2 mm thick complete all as specified and directed by Engineer - in - Charge.
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 105x60mm with 1.2mm thick complete all as specified and directed by Engineer - in - Charge.
M&L Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.
M & L for applying two coats of synthetic enamel paint (ordinary tint) over one coat of red oxide primer on new steel surface over 10 cm width or girth, not otherwise described including preparation of surface complete all as specified and directed by Engineer - in - Charge.
S & F for 35mm thick factory made gauged skelton shutters open rebated and prepared to receive gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beady for receiving gauze etc of 35mm thick and door for IInd class hard wood rail and style as specified in SSR Part-I Section 8, cluase 8.24(a) and complete all as specified and directed by Engineer - in - Charge.
S & F for 35mm thick factory made IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.
M&L for preparation of surfaces of new wooden Surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer - in - Charge.
S&F 100 mm Butt hinges stainless steel with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer - in - Charge.
S & F aluminium handles D type back flate anodised, 150mm long complete all as specified and directed by Engineer - in - Charge.
S& F aluminium anodised barrel tower bolts of extruded section and fixed 100 mm size complete all as specified and directed by Engineer - in - Charge.
S&F 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.
S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer - in - Charge.
S&F in repairs, stop valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe or complete all as specified and directed by Engineer - in - Charge.
S&F in repairs soap dish of any size fixed with screws complete all as specified and directed by Engineer - in - Charge.
S&F in repairs grating doom 100 mm dia of stailess steel with and without hole complete all as specified and directed by Engineer - in - Charge.
S & F in repair stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.
S & F in repair stainless steel towel ring min 30mm dia including brackets complete all as specified and directed by Engineer - in - Charge.
S&F in repairs long body bib taps,15 mm cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed by Engineer - in - Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.
S&F in repair water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI 'P' trap/S trap complete all as specified and directed by Engineer - in - Charge.
S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.
S&F, in repair vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer - in - Charge.
Supply only fancy type swan neck pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
Dismantling cast iron pipe of any dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron 'Y' tee sand cast fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
M&L for CI floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer - in - Charge.
Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in - Charge.
M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer - in - Charge.
S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in - Charge.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer - in - Charge.
Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.
Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.
Taking up or down for 25mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
S&F in repairs vitreous china urinals, full stall type flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Engineer - in - Charge.
S&F Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed by Engineer - in - Charge.
M&L for granite (of any type) 20 mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, rounding of edges (moulding of edges) and polishing complete laid over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed by Engineer - in - Charge.
S&F Harrison rails mild steel chromium plated with fixing brackets, stops, rollers etc 20mm bore dia complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in bay n.exc 2.5m length complete all as specified and directed by Engineer - in - Charge.
Demolition of RCC as in Roofs, floors, parrapet walls ( other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer - in - Charge.
Demolition of brick work built in cement mortar of any descriptioncomplete all as specified and directed by Engineer - in - Charge.
M&L brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed by Engineer - in - Charge.
M&L for RCC nominal mix 1:1 1/2: 3 (using 20mm graded aggregate ) as in slabs suppotred on walls, beams and columns complete all as specified and directed by Engineer - in - Charge.
S & F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed by Engineer - in - Charge.
Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed by Engineer - in - Charge.
M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.
M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge. Note : WPC rate included in this item no extra shall be paid.
M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed by Engineer - in - Charge.
M&L two coat of Acrylic emulsion (Distemper) on newly pastered wall surfaces over one coat of wall care putty including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M&L two coat of Acrylic emulsion (Distemper) on newly pastered ceiling surfaces over one wall care putty including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M & L applying two coat of Premium Acrylic Smooth exterior paint (Apex) with silicone additives on new plastered external wall surface including one coat of wall care putty as per manufacturers instruction complete all as specified and directed by Engineer - in - Charge. Work will be carried out by mechanical means.
M & L two coat of Acrylic emulsion (distemper oil emulsion) on old decorated plastered wall over and including one coat of wall care putty with complete removal of existing treatment of walls complete all as specified and directed by Engineer - in - Charge.
M&L two coat of Acrylic emulsion on old pastered ceiling surfaces over and including one coat of wall care putty with complete removal of existing treatment of ceiling surface complete all as specified and directed by Engineer - in - Charge.
M & L for complete removal of existing treatment of wall surfaces and applying two coat of Premium Acrylic Smooth exterior paint (Apex) with silicone additives on external surfaces of wall including one coat of wall care putty as per manufacturers instruction complete all as specified and directed by Engineer - in - Charge. Work will be carried out by mechanical means.
S & F 18/19mm thick block Board, 2 quality interior grade & commercial type with mica laminated one side decorative and other side plain white fixed with screws to timber framwork complete all as specified and directed by Engineer - in - Charge.
S&F plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and directed by Engineer - in - Charge.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engineer - in - Charge.
Removing excavated soil material out side MD land and depositing where directed complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed by Engineer - in - Charge.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.
S&F precast machine pressed concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, set, jointed & pointed in neat cement slurry in floor/pavings/path etc with grey cement and no pigment complete all as specified and directed by Engineer - in - Charge.
Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer - in - Charge.
M&L PCC 1:2:4 (40mm graded stone aggregate) type B2, in foundation of posts and struts complete all as specified and directed by Engineer - in - Charge.
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed by Engineer - in - Charge.
M&L mild steel work as in framed work i.e. Angle iron/flat iron including caps , bases, splices, all lattice bars, cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.
S&F Pre-painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
S&F for Pre-painted Galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick for Ridge of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engineer - in - Charge.
S & F for Rolled mild steel in plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk) forming holes , without any attachment conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.
Excavating in trencehes not exc 1.5 meter wide and not exc 1.5 meter in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil complete all as specified and directed by Engineer - in - Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layes not exc 25 cm thick in sof/loose soil complete all as specified and directed by Engineer - in - Charge.
Removal excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and directed by Engineer - in - Charge.
Supply & fixing mild steel clamps made of flate iron 40x6mm in two halves for tappig through 40 to 100mm bore GI/DI water pipe line incluidng drilling and welding of 15-25mm GI socket and necessary rubber inserttion, nut, bolts & washers complete all as specified and directed by Engineer - in - Charge.
M&L for Cutting existing steel tubing for alterations or additions for 40mm to 50mm size screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed by Engineer - in - Charge.
Supply and filling in Sand for cable protection complete all as specified and directed by Engineer - in - Charge.
Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge.
M&L for fixing GI tubing (light grade) 80mm dia for cable protection laid under path / trench / wall / on pole complete all as specified and directed by Engineer - in - Charge.
Supply and lay jointing and testing and commissioning in replacement of 25 sqmmx4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi standed aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer - in - Charge.
Supply, fixing, testing & commisioning of electric chimney (90 CM) with feature of baffle filter, inbuilt light, touch screen control panel, noise level, 58 dB, stainless steel body, air suction capacity 1200 CMH, speed level 3, motor power 180 watt input vol 220-240 V/50Hz, remote controlled and fitting in wall as connecaled or duct complete all as specified and directed by Engineer - in - Charge.
Supply and fixing of MS powder coated fly catchers machine with dimensions ( L 24.5" x D 5.5" x H17"), light source philips actinic UV tubes (two tubes), capacity of 18 watt each of tube complete all as specified and directed by Engineer - in - Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
Dismantling and taking down fluoresent/LED tube light/ wall light/ ceiling light single/bulk head/tube light/ suspension light/mirror light double of any watage or size street light fittings for repair / Refixing purpose complete all as specified and directed by Engineer - in - Charge.
Fixing only LED lights fitting 1 x 20/25W, 220V, LED tube light/security light/bulk head/mirror light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer - in - Charge.
M & L for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron / pressed steel terminal boxes suitable length and thickness for mounting switches, sockets, fan regulator with 3mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good distrubred surfaes of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/fan point controlled by switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.
All as per Srl item No -128 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -128 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -128 here in before but for one switch socket combination 6 pin 15/16 amp on independent board with copper conductor 2.5 sqmm complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole one ways complete all as specified and directed by Engineer – in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 pin, type 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F Socket outlet 3 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1x10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge.
S & F in replacement of existing light fitting with LED batten with aluminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor two core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S & F Water tight bulk head fitting,comprision of connector weather proof enameled gallery , glass well and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge
S & F in replacement MCB protected socket 25Amps in renewal with plastic box and plug top vertical din rail mount type suitable to operate at 240V current rating range 25A, 50Hz 1Ph, complied IS specification 13032 & 8623 complete all as specified and directed by Engineer - in - Charge
S & F in replacement round recess mounted LED edge lit slim downlight 12 watt (6500K) with opal diffuser and separate electronic driver die-cat aluminum housing fineshed in premium white powder coating efficacy 100lm/w complete all as specified and directed by Engineer - in - Charge
S & F Decorative wall mounting made of polycorbonate suitable for 9 W LED lamp, B22 base complete all as specified and directed by Engineer - in - Charge
S & F stepped type, single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge
S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheated 6 sqmm (Normal Area) FRLSH stranded copper conductor drawin in and including steel dia 25mm "medium quality" conduit including 6.00 sqmm (Norminal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary juction box and covers includig necessary connections, PVC flexible pipe are use in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (PVC cable and PVC conduit shall be ISI makred)
S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheated 4 sqmm (Normal Area) FRLSH stranded copper conductor drawin in and including steel dia 25mm "medium quality" conduit including 4.00 sqmm (Norminal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary juction box and covers includig necessary connections, PVC flexible pipe are use in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (PVC cable and PVC conduit shall be ISI makred)
S&F in repairs sheet metal enclosure for duble door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enamelled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.
S&F in repairs sheet metal enclosure for doubel door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked, 200 amps bus bar stove enamelled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.
S&F in repairs MCCB TP&N 63 Amps with breaking capacity 16KA, fixed TM and 415 volts AC supply ISI marked complete all as specified and directed by Engineer - in - Charge.
S & F in replacement MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kgs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate No.3 of SSR Part I and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge
S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge .
S&F in replacement sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surfae with insulated material like polyester with epoxy power coated surface mounting VTPN 4 Way 415 Volt ISI marked 250 Amps bus bar stove enameled dust and vermin proof, IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer - in - Charge.
Supply and fix PVC body tent/industrial type desert cooler (1135x600x1535mm) alongwith four wheels, electric driven (single phase), 3 speed motor with 950 RPM, 30 inch axial type fan, noise level 68 db, having nominal air flow capacity of 18000CMH/10500 CFM, large size, pad size (1100x100x1150mm), water tank 90L capacity, black color complete all as specified and directed by Engineer - in - Charge
Hanging only ceiling fan (M.D. Supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer - in - Charge.
Fixing only exhaust fan (M.D. Supply) and connecting up including provision of cable from ceiling rose/connector to fan an clean the existing exhuast fan with chemical solution complete all as specified and directed by Engineer - in - Charge.
S&F RJ-45 data and TV socket each for connection of datea network and TV cable (dish) complete all as specified and directed by Engr -In - Charge
S&F rigid non metalic PVC conduit 20mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and complete with all fixing accessories such as couplers, lcok nuts, saddles, pipe hooks etc complete all as specified and directed by Engr -In - Charge
S&F steel body exhaust fan of 300mm sweep, 240 volt, 900 RPM, 5 Star rating complete with louvers and shutter and mounted in suitable opening arrangement in wall and connection up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including braking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color etc complete all as specified and directed by Engr -In - Charge
Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, pvc connection pipe fixed along walls with all fixing material required at site and elecric connections with copper cable 3 core and plug top 15 A including making good to disturbed surface complete all as specified and directed by Engineer-in-Charge. (Note : The Geysers shall be ISI marked)
S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, scrwed for iron pipe or for brass ferrule and fixed of size 15mm bore complete all as specified and directed by Engr -In - Charge
S&F gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed or GI pipes of size 15mm bore complete all as specified and directed by Engr -In - Charge
S&F steel water tubing medium grade galvanised 15mm bore with all fittings and fixed recess in walls and ceilings or laid in floors including making good to disturbed surfaces complete all as specified and directed by Engr -In - Charge. Note :- All tubing should be concealed in wall be chasing and connection to be made independently from water tank of Geyser.
M&L for concealed conduit point wiring complete for light on independent / combine board with cable 2.5 sqmm (Nominal area) FRLSH PVC insulated multisranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks, elbows, juction covers and junction boxes, after cutting in wall chasing for conduits and sinking's for sunken GI terminal boxes Min 50mm deep, suitable length and 1.6 mm thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with cadmium plated screwed and cup wahers, duly grouting and making the good distrubed surfaces of wall in CM 1:3 with white waash or existing colour including provision of continuous earth contuinuity conductor along with point wiring of 2.5 sqmm copper PVC insulated cable for one light/fan point controlled by on switch an connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge.
S&F MCB 'B' series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed by Engr -In - Charge
M&L for providing and fixing stainless steel (Grade 304) railing made of square hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) & providing baluster and necessary fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasterners, stainless steel bolts ect. of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr -In - Charge
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
PAREEK AND COMPANY
J and P CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .