PROVN OF CERTAIN LBW WORKS AT AF STATION SONEGAON UNDER AGE (I) AF SONEGAON

Amount

Excavating over areas, not exceeding 1.5 m deep and getting out in soft/loose soil etc complete all as specified and directed.

Excavating over areas, not exceeding 1.5 m deep and getting out in hard/dence soil etc complete all as specified and directed.

Excavating over areas, exceeding 1.5 m deep and getting out in soft/loose Black Cotton soil etc complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard/dence soil complete all as specified and directed.

M &L for Plain cement concrete in foundation filling type D-2 1:4:8 (40mm graded stone aggregate) and as mass concrete complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or paving's, laid in layers not exceeding15 cm thick, spread, leveled and rammed including watering complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick using soil complete all as specified and directed.

Surface dressing not exceeding 15 cm deep and getting out soft/loose soil complete all as specified and directed.

Removing excavated material hard/ dence soil to a distance exceeding. 1.5 KM but not exceeding 5 KM and depositing where directed complete all as specified and directed.

Removing excavated material soft/loose soil to a distance exceeding. 1.5 KM but not exceeding 5 KM and depositing where directed complete all as specified and directed.

Removal of excavated materials soft/loose soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Removal of excavated materials soft/loose soil to a distance exceeding 50 mtrs but not exceeding 100 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

S & F TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to IS complete all as specified and directed.

All as per Item No 14 Above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders quality confirming to IS complete all as specified and directed.

M&L for RCC (Nominal Mix) Type B-1, 1;2:4 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; linth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Nominal Mix) Type B-1, 1:2:4 (20mm graded stone aggregate) beams, cantilevers, bressummers, lintels over 1.5m span and other similar bands, etc. complete all as specified and directed.

M&L for RCC (Nominal Mix)Type B-1, 1;2:4 (20mm graded stone aggregate) in Chajjas complete all as specified and directed.

M&L for RCC (Nominal Mix) Type B-1, 1;2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Brickwork with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

M & L for Brickwork with fly ash bricks old size straight or curved on plan not exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

M & L for rough finished Formwork to surfaces of concrete flat sides of concrete foundations, footing , bases of columns, raft and raft beams , sides and soffits if any of foundation and plinth beams and similar work complete all as specified and directed.

M & L for rough finished surfaces of concrete Formwork flat to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter complete all as specified and directed.

M & L for rough finished Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M & L for rough finished Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M & L for rough finished surfaces of concrete form work square or rectangular to sides of pillars, posts, struts, columns and stanchions circular on plan complete all as specified and directed.

S & F rolled mild steel roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc.complete all as specified and directed.

S &F mild steel screw bolt, 11 to 15 mm dia bolt machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square nut n. exc 5 cm and not exceeding 10 cm long complete all as specified and directed.

S & F Plates (plain) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W(Gde-E-250) complete all as specified and directed.

S & F in MS compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming Fe 410 -W (GdeE- 250) quality'A' complete all as directed.

S&F Pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screwed complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) on brick/concrete surface finished even & smooth without using extra cement complete including WPC @ 3% by weight of cement complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 for backing of Dado/ Skirting finished even and fair complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick on CM (1:6) for laying tiles in floor complete all as specified and directed.

M&L for Brickwork with flyash bricks olsd size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces on wall including preparation of the surface, complete all as specified and directed.

M&L preparation of newly plastered surfaces on wall and applying two coats of cement base paints over a coat of priming plastered surfaces with alkali resistant priming pain complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over a coat of suitable primer over and including a thin layer of wall care putty over newly plastered surfaces on wall including necessary preparation of the surface, complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over a coat of suitable primer on newly plastered surfaces on wall including necessary preparation of the surface, complete all as specified and directed.

M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of pink primer complete all as specified and directed.

M & L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4, complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for 150mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63mm,deposited, spread and leveled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base of floors complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tiles exceeding 0.11 sqm but not.exceeding 0.18sqm in floor etc,over 15 mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M &L for Glazed ceramic tiles on vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surfaces complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fix in opening complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, & fixing in frame complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm ullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing complete all as specified and directed. Note: (i) Glass shall be paid separately. (ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. ( iii) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F MS frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders & for staging of water tank etc and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.

S & F Pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S & F Pressed steel frames for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S & F 1.25mm thick Mild steel, plain, black heet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, utlets, etc. as equired complete all as specified and directed.

S & F Steel rolling shutter of lath thickness 1.25mm with ball bearing as specified including top cover anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle with 2 Nos each safety level locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for 35mm thick 2nd class HW rail and style plain framed, factory made panelled shutter (two panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass or Gauze all as specified in SSR Part-I sec 8, clause 8.24 (a) and fitted to chowkhat incl 300 mm mild steel ordinary rat rail rod pattern spring incl roller plate etc all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note: (i) Glass or wiremesh shall be paid separately) (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (iii) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F mild steel medium weight cold rolled butt hinge 100mm size complete all as specified and directed.

S & F Stainless Steel Handle of 150mm size complete all as specified and directed.

S & F Aluminium Handle of 150mm size extruded aluminium alloy fabricated type anodised complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolts 300 mm with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F 20 mm dia Harrison rails, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S & F Stainless Steel, barrel tower bolts of extruded section and fixed (200mm long) complete all as specified and directed.

S & F Stainless Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, devetailed or welded all as specified and directed.

S & F Stainless Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, devetailed or welded all as specified and directed.

S & F Stainless Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Steel window frame 1.25 mm thick box type (primer coated) ERW hollow P section of size 60 mm x25 mm single rebated comprises glazed shutter and wiremesh shutter (2 Nos leaf for each shutter) including guard bar ERW section 50mmx20mm and 1.0 mm thick with two openable leaf considering two nos sash bar of T- section 20mmx3mm cinokete welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good in PCC 1:2:4 type B-1 including following fitting welded to frame shutter:- (i)Hold fast 150 mm long of 12mmx3mm made to shape -04 Nos per window (ii)Handle of Z section 20mmx25mm 100 mm long -01 Nos per leaf (iii)MS tower bolt 150 mm long -01 Nos per leaf . (iv) Z section 20mmx25mm 100 mm long stopper -01 Nos per leaf. (v)Cleat 55 mm long of hollow square 15mmx12mm -02 Nos per leaf . (vi)Fabrication & fixing arrangements as Drg No CE/ALD/TD-172 Sheet No 1/2 & 2/2. (vii)MS guard bar 12 mm square bars @ 120 mm c/c fixed horizontally.

S&F Stainless Steel, sliding door bolts 250 mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and fixed complete all as specified and directed.

S&F Stainless Steel, locking bolts 250 mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and fixed complete all as specified and directed.

S &F 4mm thick glass sheet ordinary quality & fixing with Oil putty in squares exceeding 0.50 sqm in each pane complete all as specified and directed.

S &F 3mm thick glass sheet ordinary quality & fixing with Oil putty complete all as specified and directed.

S &F 3mm thick figured glass sheet ordinary quality & fixing with Oil putty complete all as specified and directed.

S&F in vitreous china wash basin, white flat back size 550x400mm including waste, chain & plug and porcelain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or erecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc. with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed.

S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed fitted bore of trap 40mm complete all as spd and directed.

S & F Vitreous china wash down water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and directed.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S & F PVC flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle, including bracket and 38mm dia flush pipe of polyethylene for low level cistern complete all as specified and directed.

S&F GI tubing 25 mm bore medium grade with all fitting including cutting for branch line & making threads complete fixed to wall/ flooring/ceiling etc or laid in treanches complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fitting including cutting for branch line & making threads complete fixed to wall/ flooring/ceiling etc or laid in treanches complete all as specified and directed.

S&F GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete of 15 mm dia bore pipe complete all as specified and directed.

S&F 15 mm bore stop valves/angle valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F , 15mm bore, bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia pillar tap fancy type with capstan heads chromium plated screwed down, high pressure with or without lettered "Hot or Cold with long sereuled shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank tripal layer (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tank tripal layer (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified.

Supply and fixing 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and directed.

Supply and fixing 25mm bore gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and directed.

M&L 110 mm dia outlet PVC(SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete all as specified and directed.

M&L PVC (SWR) bend any radius 110mm dia complete all as specified and directed.

M&L PVC(SWR) Tee any radius 110mm dia complete all as specified and directed.

M&L PVC(SWR) P trap of 110mm dia complete all as specified and directed.

S&F PVC(SWR) Gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of length 450 mm complete all as specified and directed.

S&F 15mm dia stop valves fancy type, chromium plated complete all as specified and directed.

S &F shelf of PTMT Fixed with and including CP Brass screw and wooden/plastic cleaps complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed .

S & F CP tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in roof kerb or mud stops and side of path and the like including weathering, slightly rounded or chamfered angles and throating for internal surface channel complete all as specified and directed.

M&L providing and fixing Gypsum ceiling board 12 mm thick size 605x605mm in ceiling perforated finish , fixed with screw as per manufacturers instructions fixed or laid/ inserted to aluminium framework with screws all including anodised aluminium snap grid frame work for false ceiling with suspended wire 3 mm dia @ 1200 mm c/c including making niches for fans/light complete all as specified and directed.

S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S & F Stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

M & L for Cement Concrete bed to drain pipes including packing under and completely surrounding pipes for 100 mm dia with concrete after they are laid and tested in trench complete all as specified and directed.

M & L for Brickwork with fly ash bricks old size straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

Excavation in Post holes (Or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm all as specified and directed.

M & L Cement Concrete 1:2:4 type B-2 as foundation filling mass concrete (using 40mm graded aggregate) complete all as specified and directed.

S&F on site LLDPE septic tank 20 user designed to carry sewage and sullage water, excavation in any type of soil PCC 1:4:8 below foundation vent shaft connection etc complete for upper flow filter complete all as specified and directed. Make: Sintex / Dhara/ Tuff

M & L for Soakage wells of size (10 User) 1.2 M dia x 1.5 M effective depth. including excavation in any type of soil foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M 25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/SFRC cover, inter connecting pipes of RCC/DWC complete filled with brick bats complete all as specified and shown on drawing. Drg No: TD/576 of 1/2 & 2/2

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plate forms and like laid over 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

S & F 18/19 mm thick PVC decorative Laminated board in kitchen CB/shutter/drawers max 60 cmm deep and all inner sides to be covered by the PVC board including SS 3D hinges, handles, knobs, magnets, telescopic channels for draweres and etc complete all as specified and directed.(Note : Top/Front surface area to be measured for payment)

S & F Ball catched with 8mm steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F SS cloth hanger hook 6 pin heavy quality and fixed complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as spd and directed

S & F Brass Chromium plated shower rose 125 mm size complete all as specified and directed.

S & F Brass Chromium plated soap tray of size 150mm complete all as specified and directed.

M&L for RCC M-25 design mix (20mm graded aggregate) in foundation and footing & plinth beam. complete all as specified and directed.

M&L for RCC M-30 design mix (20mm graded aggregate) in foundation including raft footing, foundation, beams, plinth beams, bases for column etc basement slabs under ramed piles and mass concrete complete all as specified and directed.

M&L for RCC M-30 design mix (20mm graded aggregate) in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for RCC M-30 design mix (20mm graded aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 design mix (20mm graded aggregate) in lintels beam, over 1.5m clear span and other similar bands, etc. complete all as specified and directed.

M&L for RCC M-25 design mix (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for PCC M-25 design mix using 20mm graded aggregate as in any location complete all as specified and directed.

M & L Green Marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like laid on 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types including bullnosing the edges complete all as specified and directed.

M & L Chequred cement concrete tiles of size 30 cm x 30 cm and 25mm thick jointed and pointed in neet cement slurry with grey cement and pigment to match the shade over and including screed bed 15mm thick in CM (1:4) complete all as specified and directed.

Rolling and consoling moorum or red bajri of any thickness with 2 to 5 tonne power roller all as specified and directed.

Rolling and consoling of broken boulders not exceeding 15 cm thickness with 8 to 12 tonne power roller all as specified and directed.

M & L for 250mm thick flexural Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre including necessary form work complete all as specified and directed.

M & L for Finishing surface of concrete ,pavements/ hardstanding by brooming complete all as specified and directed.

M&L for forming 20 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade 'A' for 200 mm thick concrete slab complete all as specified and directed.

S & F Structural steel, rolled section such as joist, beam, channel, angle, tee, with fe 410 W Gde E 250 quality A complete all as specified and directed.

M & L for Welded steel wire fabric n exc 4 kg /Sqm supplied and fixed complete to wood or steel members complete all as specified and directed.

M &L for PVC concealed conduit point wiring with 1.5 square mm nominal area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 part-i draw in 20 mm size PVC conduit in concealed including 600volts grade 1.5square mm copper stranded single core cable green color PVC insulated for continuous earthing wire with complete chess cutting ,including 20 mm dia PVC conduit with elbow,bends,couplers,tee, sunken boxes pressed steel boxes made out of not less than 1.6 mm thick sheet mounting fitting/junction boxes et. covered with 2.8 mm thick white laminated bakelite sheet (ISI marked), including painting outer side with one coat of bitumenus paint and inside a coat of red oxide primer covered the conduit with cement mortor after drawing of electric cables and making good of distrubed surfaces and match with existing shade of wall/roof complete all as specified and directed for foiiowing :-.

(a) One light/fan point controlled by one switch

(b) One Exhaust Fan point controlled by one switch

(c) One three pin 5 Amps switch socket outlet on independent board/wall mounting fan all as directed.

(d) One three pin 5 Amps switch socket outlet on same board

S&F switch piano, flush type single pole,5/6 Amps, 240 Volts AC complete all as specified and directed.

S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed.

S & F fan step regulator ,120 W,-2 module complete all as specified and directed.

ditto- all as per item No.148 here in before but point wiring with 2.5.0 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 2.5 sq mm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.

S&F switch socket combination 5 Pin,5 Amps,240 Volts, flush type complete all as specified and directed.

S&F switch socket combination 2 IN 1, 3 Pin,5 and 15 Amps,240 Volts flush type universal ,complete all as specified and directed.

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified and directed. Make : CGCta No-LDL-20-NW/wipro/CG/Havells/philips/Bajaj.

S & F 36 Watt Recessed LED perforated Single Window modern Designed enabled by advanced LFD light.it blandes into celing plane &maintain Uniform luminance across aperature to enhance visual comfort ceiling tile provided with a drop down acrylic diffser suitable for 600X600 MM ceiling incluiding extra frame for fixing at POP/ Gysum Ceiling mounted version including LED light complete. The 36W system shall be operating at 220-240v AC supply having internal driver. Individual LED's should not be visible for glare free output, and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum 1.5 Sqmm size and testing complete all as specified and as directed. Make : CG LCTLRP-36-FO-CDL equivalent in Havells , Wipro.

S & F, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 12 way, 415 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 4 way, 415 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

S & F Sheet metal enclosure 8 Ways for MCB DBs SPN 240 volts, Double door type powder coated with 200 Amps rated bus bar, neutral link, earth rail & din rail, ISI marked, complete all as specified and directed.

S & F MCBs "C series"of capacities TPN 40 to 63 Amp 240/415 volt complete all as specified and directed.

S & F MCBs "C series"of capacities SPN 32/40 Amp 240/415 volt all complete all as specified and directed.

S & F MCBs "C series" of capacities SP 06 Amp to 32 A 240 volt complete all as specified and directed.

S&F Ceiling fan complete with three blade, down road, accessories 230 V, 1200 mm sweep, with squirrel cage induction motor , energy efficient 5 star rated complete all as specified and directed.

S & F 35 Watt LED Bldg security light. The luminaire shall meet IP66 rating .The luminaire housing should be made of pressure die cast aluminimum. The total power consumption should not exceed 35W (including driver) pre wired fitted on and including two Nos PVC block of suitable l size and connection up to light fitting with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size , proper clamping arrangement at wall/roof with GI tubing as per required size and testing complete all as specified and as directed.

S&F Exhaust fan made up of sturdy Engineering plastic complete with louvers shutter , voltage 230 V, 50 Hz, RPM 1200 , Cooper winding of sweep 300 mm complete all as specified and directed.

S & F Splite AC 1.5 TR (5 STAR RATING) capacity,out door unit installed on angle iron anchor pickets made out of 5mmX25mm X5mm angle iron/AC stand suggested by manufacturer & inner unit of A/C in side the room wall surfaceincluding Remote with suitable space for further maintenance including necessary gas charging / topping up R-407C/410R with soldering of copper tubes as rquired at site all as directed including exposed nitrile ruber and refrigerent piping covering filled the wall with plaster of perish compound & making good of distrubed surface complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete all as specified and directed.

S&F semi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 Amps 12 KAMP returning cap complete all as specified and directed.

M&L for sub main wiring with 2x4.0 Sqmm FRLS copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 1x4.0 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 4 sqmm FRLS and one run of 1.5 sqmm FRLS copper conductor shall be measured as one unit length.)

S&F semi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 AMP 12 KAMP reputuring cap complete all as specified and directed.

Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth strip 32 x 6 mm connected to earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel with & including ; PCC 1:3:6 C1 pit with cover of RCC 1:1.5:3 A1 40 mm thick reinforced with 3 Nos, 6 mm dia bars both way, watering arrangements with 20 mm GI medium grade pipe ISI marked, GI funnel with GI mesh, filling with mixture of common salt & charcoal in alternate layers, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete all as specified and directed. (Note :- GI earth strip & protection pipe with GI pipe protection shall be measured & paid separately)

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth lead wire 4.0 mm dia by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 5 of MES Sch Part I , connected to Earthing test point complete all as specified and directed on testing on completion.

M & L for Earth continuity conductor with galvanised iron strip 32 x 6mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

M & L for fine dry sand cushioning to under ground electric cable complete all as specified and directed.

Supplying & laying of bricks old pattern class 'B'for cable protection complete all as specified and directed.

Supplying & laying GI Tubing 40 mm dia Light grade pipe with connecting acessories complete in trench for road and on surface/,wall for protection complete all as specified and directed.

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed (a) 16 Sqmm x 2.0 core

Supply and laying & testing and commisioning 25 Sqmm x 3.5 core LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed .

S&F Isolator DP 63 Amps AC with necessary connection in DB box Complete all as spefied and directed.

S&F MCCBs four pole 415 volts, 16 KA, 63 Amp AC in existing panel board with modification/ fabrication of existing panel board as Complete all as spefied and directed.

S & F Splite AC 2.0TR (5 STAR RATING) capacity,out door unit installed on angle iron anchor pickets made out of 25 mm X 25mm X 5mm angle iron/AC stand suggested by manufacturer & inner unit of A/C in side the room wall surfaceincluding Remote with suitable space for further maintenance including necessary gas charging / topping up R-407C/410R with soldering of copper tubes as rquired at site all as directed including exposed nitrile ruber and refrigerent piping covering filled the wall with plaster of perish compound & making good of distrubed surface complete all as specified and directed.

S & F of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sunken boxes pressed steel boxes made out of not less than 1.6 mm thick sheet mounting fitting/junction boxes et. covered with 2.8 mm thick white laminated bakelite sheet (ISI marked), including painting outer side with one coat of bitumenus paint and inside a coat of red oxide primer covered the conduit with cement mortor after drawing of electric cables and making good of distrubed surfaces and match with existing shade of wall/roof complete all as specified and directed.

M&L concealed type point wiring for explosive storage acommodation with PVC insulated 4 sq mm multistranded copper conductor cable, for 5 pin 15 amp switch socket combination on Independent board ,FRLS,1100 volt grade drawn in and incl surface mounted ERW stove enamelled , black steel conduit not less than less 20 mm dia with and including flame proof bends and elbows, couplers, bell mouth reducer except junction box all as per relevent IS fixed with solid baked distance saddles ,and elevated MS spacer plate fixed with nettle fold GI screws along with one run of 4smm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.

S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+ earth complete all as specified and as directed.

S&F flame proof /weather proof 1.5 TR Split Air conditioner as per relevant IS complete suitable for single phase 240VAC/440VAC, 50 Hz alongwith the flame proof condennsing unit, Cooling unit, Flame proof control panel complete all as specified and directed. Make: Shyaam Switchgear Cat part No.SSPL/MT/140/Sudhir/ flexpro.

S&F Cooper tube for Air conditioner withh size 3/8 inch or 5/8 inch complete all as specified and directed.

S&F Flame proof DB 4 way with MCB DP 32A Capacity Construction with cable entries at bottom/Top for Incoming MCB ,2P, 16/25 Amp-01 Nos and & 2 no MCB 1P 6/10 amp as outing circuit with complete internal Bus bar & wiring upto the the terminals all as specified. Make : Sudhir/ Shyam switch gear/ flexpro for DBs Make : L&T/Schneider/Havells

M&L for fabrication of Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for fixing of flame proof fittings & DBs complete all as specified and directed.

chronicle enterprises (BID ID -3154586)

Aggarwal Brothers and company (BID ID -3157069)