COMPLETE MAINT SERVICES FOR BR NATURE FOR POCKET D, G, E AND F AT AKHNOOR UNDER GE (N) AKHNOOR

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) as in sub base / levelling cousre including finishing surface of concrete topping even and rough , complete all as specified and as directed.

50mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

Precast factory made chequered designer tiles (Rectified interlocking tiles) 300x300 mm glazed top (Laqquere finished) made in white cement and pigment base of thickness not less than 19 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set and jointed in neat cement slurry(colour and pattern as per sample kept in GE office as approved by GE) including 15 mm thick screed bed in CM 1:4 all as specified and directed.

Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade, laid jointed & pointed with grey cement and pigments, with & including 25mm thick sand filling under pavers and paking the joints of paver block with sand including watering and consolidation all as specified and directed. Note:-The shape, size and colour of paver block shall be as approved by GE.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm rendering thick in cement mortar 1:4, complete all as specified and directed. (Sample as approved by GE & kept in sample room).

Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm. Set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed.

Description all as per srl item No 09 above but Glazed ceramic tiles as in skirting over & including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and directed.

Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc area of each tiles exceeding 0.18 Sqm but not exc 0.38 Sqm. Set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed. (Sample as approved by GE & kept in sample room).

Description all as per srl item No 11 here-in-before but as in skirting over & including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. Note :- Form work required for these items included in the unit rate of this item.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed.

Description all as per Srl item No. 16 here-in-before, but except bricks.

Rendering 15mm thick in cement mortar (1:4) on fair faces of the brick work or cement concrete surfaces, finishing the surface even and smooth without using extra cement, complete all as specified

Rendering 15mm thick cement plaster with cement mortar (1:6) on fair faces of brickwork or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper to walls over one coat of alkali resistant primer over 1 to 2mm thick wall care putty as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed.

Preparation of Old plastered surfaces of walls by washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of cement base paint white/tinted all as specified and directed.

Preparation of Old plastered surfaces of walls by washing, rubbing, stopping brooming down with steel wire brushes and applying one coat of oil bound distemper all as specified and directed.

Complete removal of exising treatment of old plastered or unplastered surfaces by brooming down with steel wire brushing, scrapping down smooke soot, moulds, moss & effloresent salt and trading oil, greasy spots for prepation of existing surfaces for painting,

Applying 1 to 2 mm thick wall care putty on old/ newly plastered surfaces of walls and prepare to receive painting complete all as specified and directed.

Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall surface, complete all as specified and directed. Note:- (i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE/ (ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same.

Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering, complete all as speciified and directed.

Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets/GI grid framework complete all as specified and directed.

Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed.

GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c of ceiling including 4mm thick pre-laminated designer ceiling boards fixed with fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed.

Dismantling water tanks of cap exc 500 but n.exc 1000 ltr all as specified.

Dismantling water tanks of cap exc 250 but n.exc 500 ltr all as specified.

Rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs including 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 500 Ltrs including 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs, complete all as specified and as directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.

Taking down shutters of any description n. exc 1.00 Sqm each and removing from site, complete all as specified and directed

Taking down shutter of any description area exc 1 sqm but not exc 2.0 sqm each & removing from site complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) n.exc 1.50 sqm complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each, complete all as specified and directed.

Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos FI 25x3mm projecting 10cm on either side & tarring back of chowkats and holdfasts with & making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 Type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed.

Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos FI 25x3mm projecting 10cm on either side & tarring back of chowkats and & making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 Type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified.

35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.

Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Aluminium handles fabricated type anodised of size 125mm long ISI marked complete all as specified and as directed.

250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

Hasp and staple safety type of size 75mm, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 100mm , all as specified and directed.

Aluminium bottom door seal with brushes, length 1.2mtr, fixed with screw, suitable for wooden door, complete all as specified and directed.

300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

25mm outer dia stainless steel decorative drapery rod of thickness 20 guage for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150mm outer side from the clear opening of doors/ windows (including necessary fittings), fixed in repairs complete all as specified and as directed.

Powder coated anodised aluminium window / ventilator( glazed / gauged skeleton shutter ), (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No. ) suitable handle (1 No.) complete all as specified and as directed.

Taking down wall panelling including any type of aluminium door, windows and partition in any position complete all as specified and as directed.

PVC wall lining/panelling consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame including 5mm thick pvc sheet filet of width 35mm to make pvc frame as per manufacturers instruction and drawings, complete all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No. 1, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and as directed.

Supply and fixing in repair double action door spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made steel heavy duty complete all as specified and as directed.

Aluminium body Mortice lock,4-levers vertical type, size 100 mm with & including escutcheon plates and two keys, complete all as specified and as directed.

05 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified and directed.

03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

Figured glass pin headed type, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified.

CP Sink mixer central hole basin mixer with popup waste system with 450mm long braided hoses (15mm cartridge size) fixed in repairs all as specified and approved.

Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System fixed in repairs complete all as specified.

Bib cock 15mm dia bore, fancy type chromium plated cast copper alloy with capstan head fixed in repairs all as specified and directed.

Angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe fixed in repairs, complete all as specified.

Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed.

Brass chromium plated health faucet with one metre long flexible tube and wall hook fixed to iron pipe fixed in repairs complete all as specified and directed.

Supply & fixing in repair urinal spreader of PTMT of size 15mm bore.

Supply & fixing in repair Chromium plate Stainless Steel towel rail 60cm long including brackets, complete all as specified and directed.

Towel ring of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats etc fixed in repair, complete all as specified.

Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard complete all as specified and directed.

Waste coupling of chromium plated brass 32/40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin fixed in repairs complete all as specified .

PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore fixed in repairs, complete all as specified and as directed.

Jet Spray (Stainless Steel) with 1.5 meter Tube fixed in repairs, complete all as specified and as directed.

Vitreous china wash basin, white, flat back, size 550x400mm including CP mixer for mixing hot and cold water for pipe of bore 32mm, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets and waste pipe etc., fixed in repairs complete all as specified and as directed. Cat Part No. 10036 of Hindware (Model-Windsor) or equivalent cat part of make as specified in the list of makes as approved by GE.

PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed.

Plastic water closet seat cover (white) closed pattern with flat bottom and cover including chromium plated hinges device fixed in repairs, complete all as specified and as directed.

Vitreous china wash down water closet pan pedestal pattern in white colour with 'P' or 'S' traps excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make as specified in the list of makes as approved by GE.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make as specified in list of makes as approved by GE.

PTMT Grating Round 140 mm dia fixed in repairs complete all as specified.

Waste pipe for SINK/WHB/Urinal for 32/40mm dia fixed in repairs all as specified & as directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc., complete all as specified and as directed.

Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

15mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed. Note for srl item No 134 & 135 : Cutting chases to brick or concrete surface for laying under ground pipes if required at site & making good the same with CM 1:3 shall be inclusive in rates to be quoted by the contractor.

110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floors etc., complete all as specified and directed.

PVC (SWR) Type-B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, fixed in repairs complete all as specified and directed.

75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floors etc., fixed in repairs complete all as specified and directed.

PVC(SWR) Type-B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, fixed in repairs complete all as specified and directed.

PVC SWR bends any radius 110 mm bore fixed in repairs, complete all as specified and as directed.

PVC SWR bends any radius 75 mm bore provided with access door fixed in repairs, complete all as specified and as directed.

PVC (SWR) branch piece of 75 mm bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece of 110 mm bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece of 75 mm bore pipe, double (double Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece, double (double Y) equal or unequal ordinary or inverted of 110 mm bore pipe fixed in repairs, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal of 75mm bore provided with access door fixed in repairs, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal of 110mm bore provided with access door fixed in repairs, complete all as specified and directed.

PVC SWR reducer 110mm to 75 mm fixed in repairs, complete all as specified and directed.

PVC SWR Type-B cowls 75mm bore fixed in repairs all as complete all as specified and directed.

PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, fixed in repairs in cement concrete type B-1 (1:2:4), complete all as specified.

Rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement using water proofing compound as per manufacturers' instructions (WPC shall be measured and paid separately) complete all as specified

Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished the surface even and smooth without using extra cement, complete all as specified.

Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Roughening surfaces of old concrete floors by picking,sweeping clean and washing down with water to remove dust etc and brushing with neat cement slurry using cement at 3kg/sqm complete all as specified and as directed.

40 mm thick PCC 1:2:4 type B-1, (Using 20 mm graded crushed stone aggregate) as in flooring finishing the top surface even and smooth complete all as specified.

50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays with mastic filling in joints complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.

75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in paths complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed.

Description all as per Item No 121 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4.

Stainless steel gratings 100/125mm dia fixed with cement motar fixed in repairs, complete all as specified and as directed.

Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm fixed in repairs, complete all as specified and as directed.

Bib taps15mm, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm fixed in repairs, complete all as specified and as directed.

Plain Cement Concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) for hold fast blocks, including use and waste of necessary form work, complete all as specified.

Aluminium powder coated sliding window, chowkat of size 63mm x 40 mm x 1.3 mm thick with aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed.

150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Aluminium handle cast type anodised of size 150mm long ISI marked complete all as specified.

Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed.

25 mm dia stainless steel curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw, fixed in repairs all as specified and as directed.

Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item

Description all as per Item No.134 above, but only fixed glass pane shutter without glazing bars.

3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer,complete, all as specified.

Taking down aluminium door shutter of any size / any description and making functional by way of repair/replacement of floor spring, hinges, lock, rubber packing etc as required and refixing in position of same opening, complete all as specified and directed.

Sand filling under floors laid in layers or in foundation including watering and consolidation for laying inter locking tiles/paver blocks in 25mm thick layers, complete all as specified.

Plain Cement Concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) as in coping and eadges of path, roof kerb including weathering, slightly rounded or chamfered angle and throating, necessary form work finishing all exposed faces of concrete etc complete all as specified and directed.

LAL CONSTRUCTIONS (BID ID -3251108)

PACHNANDA BUILDERS (BID ID -3244425)

M/s Chopra Constructions (BID ID -3244651)

MADAN LAL SHARMA & SONS (BID ID -3244745)

M/S SIKANDER KUMAR SHARMA (BID ID -3244658)

M/S KARAN SINGH CONTRACTOR (BID ID -3244568)