Construction of C.C Road from Ram Avadh house To Muneshwar house in Jamin Block- Ratanpur

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.5m & lift uptoo 30.0 mtr & including all to proper completion og work as per D.S.R 2.8.1

Earth work for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5mandlead upto 50m. As per PWD SOR SI NO 253+231(A)

Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement in proportion of 12:6: 1 in foundation and under floors, including supply of all materials, labour and T &P etc. required for proper completion of the work.as per S1. NO. 273

Brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in 1:4 cement coarse sand D.S.R 6.1.1

Providing, laying, spreading and compacting stone aggregates of specific sizes 53mm to 22.4mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density Grading 3 as per Technical Specification Clause 405.(4.7.3) By Manual Means ...

construction of UN Eeinforced,dowel jointed at expansion and constructionjoint only,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2(M-30) , coarse and fine aggregates conforming to IS: 383 , maximum size of course aggregates not to be exceeded 25mm mixed in a concrete mixer not less than 0.20cum capacity and approved ............AS GRADE AS PER DRAWING AND TECHNICAL SPECIFICATION MORD 1501.

12 mm thick plaster in 1:4 with cement coarse sand as per DSR13.4.1

Providing and laying RCC in1;1.5;3 in cement coarse sand and grit all work upto plinth excluding cost of centering ,shuttering and reinforcement as per DsR 5.1.2

Centring and shuttering including removal in lintels,beams,plinth beams,griders cantiliver DSR 5.9.5

Mild Steel Work In RCc including cutting and bending and all upto plinth level and abve plinth level as per dsr5.22.1