Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.7 LAccepted-Finance | 1 | Accepted-Finance less | |
| 2 | Rejected-Technical 17C ANNA NAGAR KULITHALAI KARUR DISTRICT | KULITHALAI | KARUR | TAMIL NADU | - | Rejected-Technical Estimate rate quoteabove | |
| 3 | Rejected-Technical | - | Rejected-Technical Estimate rate quoteabove | |
| 4 | Rejected-Technical | - | Rejected-Technical Estimate rate quote less | |
| 5 | Rejected-Technical | - | Rejected-Technical Estimate rate quoteabove |
Tender Value
₹4.6 L
EMD Value
₹4,600
Closing Date
11 Dec 2024, 3:00 pmClosed
EXECUTIVE OFFICER AYYAMPETTAI TOWN PANCHAYAT
EXECUTIVE OFFICER TOWN PANCHAYAT AYYAMPETTAI
Providing Mini Power Pump with Deep Borewell In Mela Veethi at Ayyampettai Town Panchayat
2024_DTP_508518_1
395-1/2024 A2
Open Tender
Civil Works
Works
90 days
Ayyampettai
Providing Mini Power Pump with Deep Borewell In Mela Veethi at Ayyampettai Town Panchayat
4 documents required · 4 mandatory
₹0
₹4,600
Yes
24 Dec 2024
7 Dec 2024
11 Dec 2024
7 Dec 2024
11 Dec 2024
7 Dec 2024
Amount
Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . for Foundations SS 20B TNDSS NO. 23 &24 V, VI (S2) VI 9
Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
Plain Cement concrete of mix 1:4:8 (One cement four sand and eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO.28 V,VI S25
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -
Supplying and Fabrication of Steel and placing in position TMT rod Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.- TNDSS NO. SS 86 & 86A V,VI, VII (S6) 7,3
Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specificationand as directed by department officials. TNDSS NO. 25
Plastering with cement mortar 1:5 ;12 mm thick in all floors etc., complete complying with standard specifications (S.I.306)
Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.
Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 150 mm/200mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site. Site will be shown by the TWAD Board officers including construction of mud pit. As per TWAD Schedule of Rates SL NO.12 A
Upto 60 mt. Depth ending below ground level Sl.No 12 A - i
Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer As per TWAD Schedule of Rates SL.NO 12b
Upto 60 mt. Depth ending below ground level Sl.No 12 b - i
Supply of the following casing pipes of ISI approved quality with wall thickness not less than 7.5mm to 8.5mm with PVC couplers and cement Paste etc. Complete and including packing the annular space with pebbles quality and size of pebbles and the PVC pipe should be approved by the departmental officer. As per TWAD Schedule of Rates SL.NO 1.2 AS PER IS 12818/1992
150mm dia OD PVC Plain casing Pipe (CS) Sl.No. 1.2 - 1
150mm dia OD PVC slot casing Pipe (RS) Sl.No. 1.2 - 3
150mm dia OD PVC end cap Sl.No 1.5 - 11
Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete supply and packing the annular space with pebbles of size and quality as approved by the executive engineers TWAD Board SL.NO.12Ei
Charges for developing the borewell with air compressor of 600 cfm capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board officers and conducting yield test by 'V' notch method. TWAD Board SL.NO 13B
supply and delivery of 1 HP single phase Submersible pumpset of duty condition 20lpm x 100 m as per IS 8034 without panel board etc complete as per standard specification.TWAD Board SL.NO.3.1 - 3
Supply of single phase Pannel board suitable for 1HP with two level guard and auto start etc complete as per standard specification. TWAD Board SL.No. 11.1 - 2
Supply and delivery of Flat cable suitable for submersible pumpset 2.5sq.mm TWAD Board SL.No.12.1 - 4
Labour charges for the errection of 1HP submersible pumpset in the Borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth walls errection clamps pressure gauges up to the exterior wall of pumping room and errection of panel board consisting of DPICN switches starter volt meter ammeter, Three Pilot ( Indicating ) lamps capacitor single phasing preventer water level guard and laying and jointing the cable s and twin earthing as per IE rules etc complete and testing to the pumpset and trial run for 10 Days. TWAD Board Sl.No- 17c-i
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD 42
Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only SD.144
Supplying and fixing of pipe and accessories ISI make including cutting and threading cost and conveyance of all charges etc complete as per standard specification.
UPVC 40mm pipe PWD Schedule of rates
32mm GI Pipe
32mm GI Elbow
32mm GI Union
Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701/ 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed by departmetal officers.
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements etc complete as per standard specification.
M/s PAVAI CONSTRUCTIONS (BID ID -1205539)
AMUTHA (BID ID -1206733)
V GOWTHAMARAJA (BID ID -1207512)
LOGANATHAN TAMILSELVAN (BID ID -1206745)
SKY CONSTRUCTION (BID ID -1205602)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .