REPAIRS TO WATER PIPELINE, CLEANING OH/UG TANK AT MIL STN SRI GANGANAGAR

Amount

Excavation in trenches in soft/loose soil & getting out in n.exc. 1.5 m wide & n. exc. 1.5m in depth for foundation etc n. exc 10 sqm on plan and n. exc. 1.5 m in depth in soft/loose soil and getting out complete all as specified and directed by Engineer - in - Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm in soft/loose soil complete all as specified and directed by Engineer - in - Charge

Removing excavated material n. exc. 50 m & depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in - Charge.

Drain out water from clarifloculator tank of cap 2.25 LG of size 19.5 Mtr dia tank comprising of 9.5 Mtr floculator & 10 Mtr sedimentation - taking out sludge/ mud/ silt manually and removing/throwing away to a distance not less than 50 M away from the Clarifloculator sump including brushing, cleaning , washing the inner walls, scraper and other connected moving parts and applying two coats black paint on it and one coat of white wash on the walls of the tank complete all as specified and directed by Engineer-in-charge.

Drain out water from Raw water sump of size 7.5 M dia and 7.5 M depth and taking out sludge / mud / silt manually and removing / throwing away to a distance not less than 500 M away from the sump cleaning washing the inner walls applying two coat white wash on the walls of tank complete all as specified and directed by Engineer-in-charge.

Cleaning of overhead reservior by draining out water from tank of capacity 0.34 Lakh Gallon/0.25 LG through out pipe line and taking out sludge/mud/silt and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval complete all as specifed and directed by Engineer-in-charge.

Cleaning of overhead reservior by draining out water from tank of capacity 0.42 Lakh Gallon/0.50 LG through out pipe line and taking out sludge/mud/silt and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval complete all as specifed and directed by Engineer-in-charge.

Cleaning of overhead reservior by draining out water from tank of capacity 1.0 LG through out pipe line and taking out sludge/mud/silt and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval complete all as specifed and directed by Engineer-in-charge.

Cleaning of overhead reservior by draining out water from tank of capacity 1.50 LG through out pipe line and taking out sludge/mud/silt and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval complete all as specifed and directed by Engineer-in-charge.

Cleaning of overhead reservior by draining out water from tank of capacity 2.0 LG through out pipe line and taking out sludge/mud/silt and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval complete all as specifed and directed by Engineer-in-charge.

Cleaning of under ground clear water sump of capacity 1.25 LG of size 8m x 14.10 m and 5 m depth drain out remaining dirty water through pumping and taking out sludge/mud/silt upto average 30cm depth and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval and finaly applying one coat of white wash on inner surface complete all as specifed and directed by Engineer-in-charge.

Cleaning of under ground clear water sump of capacity 2.50 LG draining out remaining dirty water through pumping and taking out sludge/mud/silt upto average 30cm depth and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval and finaly applying one coat of white wash on inner surface complete all as specifed and directed by Engineer-in-charge.

Cleaning of under ground clear water sump of capacity 0.42 LG/0.34 LG draining out remaining dirty water through pumping and taking out sludge/mud/silt upto average 30cm depth and thrown away the remoed sludge etc out side the defence/cantt area including brushing cleaning/washing the entire surface by pressure jet spray the bleaching powder for disinfenction and further washing the surface after suitable interval and finaly applying one coat of white wash on inner surface complete all as specifed and directed by Engineer-in-charge.

M&L for repair to unserviceable sluice valve of size 100mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle &lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer-in-Charge.

M&L for repair to unserviceable sluice valve of size 150mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle & lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 200mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle & lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer-in-Charge.

M&L for repair to unserviceable sluice valve of size 250mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle & lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, cast iron non return valve /reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 200 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, cast iron non return valve /reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 150 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, cast iron non return /reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 100 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-charge.

S&F in replacement cast iron foot valve lift flanged type of size 200mm bore as per IS 4038 complete all as specified and directed by Engineer - in - Charge

S&F in replacement cast iron foot valve lift flanged type of size 150mm bore as per IS 4038 complete all as specified and directed by Engineer-in-charge

S&F in replacement cast iron foot valve lift flanged type of size 100mm bore as per IS 4038 complete all as specified and directed by Engineer-in-charge

S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 300 mm bore of pipe with flanged ends and drilled stainless steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge Make : Kirloskar/Zoloto/Leader.

S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 250 mm bore of pipe with flanged ends and drilled stainless steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. Make : Kirloskar/Zoloto/Leader

S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 200 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. Make : Kirloskar/Zoloto/Leader

S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 150 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge. Make : Kirloskar/Zoloto/Leader

S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 100 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge. Make : Kirloskar/Zoloto/Leader

S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 80 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge. Make : Kirloskar/Zoloto/Leader

M&L for surface dressing n. exc. 30 cm deep and averaging 15 cm deep in soft/loose soil complete all as specified and directed by Engineer-in-Charge .

M&L for cleaning of raw water channel 1.2 m width and removing silt as per existing depth and removing buds and other foreign materials from the raw water channel complete all as specified and directed by Engineer-in-charge

Removing vegetations/bushes/foreign materials etc around the periphery/path of raw water reservoirs 130 Lacs Gallon cap (size of reservoir 136mtrx136mtr),clear water complex, pump houses etc throwing the wastage at a distance not less than 50 mtr as and where complete all as specified and directed by Engineer-in-Charge. Note -T&P and safety equipment required for the work is to be provided by the contractor.

S&F in replacement,cast iron fitting of any size suitable for spigot and socket or flanged pipes etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement of valve pit cover of mild steel Sheet of existing thickness duly supported with MS Angles of existing size fixed on mild steel angle of existing size complete all as specified and directed by Engineer-in-Charge

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 600 x600x900 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C1 as in foundation all as per existing pattern complete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 900 x900x1050 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C1 as in foundation all as per existing pattern complete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 1200x1200x1200 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C1 as in foundation all as per existing pattern. Complete all as specified and directed by Engineer-in-Charge. (Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

S&F in replacement 15mm Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

S&F in replacement 20mm Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed by Engineer - in - Charge

S&F in replacement 25mm Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge

S&F in replacement 40mm Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge

S&F in replacement 50mm Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for100 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 300 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 400 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge

Taking up or down CI pipe with connections of size 400 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down CI pipe with connections of size 300 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down CI pipe with connections of size 200 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down CI / GI pipe with connections of size 150 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 100 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 80 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 50 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 40 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 25 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 20 mm bore complete all as specified and directed by Engineer - in - Charge

Taking up or down steel tubing and connections of size 15 mm bore complete all as specified and directed by Engineer - in - Charge

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 100mm bore with & including all fittings complete, laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 150mm bore with & including all fittings complete, laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for laying CI pipe centrifugally cast, including special calss "B" of size 400 mm bore with all fittings laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for laying CI pipe centrifugally cast, including special calss "B" of size 300 mm bore with all fittings laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for laying CI pipe centrifugally cast, including special calss "B" of size 200 mm bore with all fittings laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for laying CI pipe centrifugally cast, including special calss "B" of size 150 mm bore with all fittings laid in trenches complete all as specified and directed by Engineer - in - Charge.

M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 300 mm to 400 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge

M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 150 mm to 200 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge

M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 80 mm to 100 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge

M& L for excavation and making proper space to rectify the leakage of galvanize iron pipe of size 80 mm to 100 mm bore inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge

M& L for to rectify the leakage of CI pipe of size 200 mm to 400 mm bore inclduing all required material to rectifiy the leakage in existing valve pits including making good the disturbed surface of pits complete all as specified and directed by Engineer-in-Charge

M& L for to rectify the leakage of CI pipe of size 80 mm to 150 mm bore inclduing all required material to rectifiy the leakage in existing valve pits including making good the disturbed surface of pits complete all as specified and directed by Engineer-in-Charge

S&F in replacement digital water level indicator including all electrical and display accessories alongwith all necessary fittings suitable for clear water sumps and over head water reservoirs complete all as specified and as directed by Engineer-in-Charge.

S&F, in replacement, MS work of required size/shape with all additional joinery/fabrication items and colour on all complete as specified and directed by Engineer-in-charge.

Supply only rubber seat suitable for Non return valves 200 mm dia as per existing shape/size complete all as specified and directed by Engineer - in - Charge

Supply only rubber seat suitable for Non return valves 150 mm dia as per existing shape/size complete all as specified and directed by Engineer - in - Charge

Supply only gland packing rope size 10 mm complete all as specified and directed by Engineer - in - Charge

Supply only gland packing rope size 11 mm complete all as specified and directed by Engineer - in - Charge

Supply only gland packing rope size 12 mm complete all as specified and directed by Engineer - in - Charge

M&L for boring of size 80 mm under pathways/roads suitable for laying of pipeline of size upto 80mm complete all as specified and directed by Engineer - in - Charge

M&L for boring of size 150 mm under pathways/roads suitable for laying of pipeline of size from 100mm to 150 mm complete all as specified and directed by Engineer - in - Charge

Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

Engineers CXonstruction Company

AYUSH BUILDERS

Akarsha Enterprises