Arasan Shanmyganar Solavandhan

Amount

ReWiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End (SD-303)

Rewiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) (SD - 22)

Rewiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil)(SD-20).

Renewal by Supply and fixing of Twin box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW round blocks on wall or ceiling with 20W LED tube with PVC unsheathed Copper leads from terminals to the fitting. (DATA-1)

Renewal by Supply and fixing of single box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW round blocks on wall or ceiling with 20W LED tube with PVC unsheathed Copper leads from terminals to the fitting. (DATA-2)

Renewal by Supply and fixing of Philips make Essential 9W LED bulb for BH point (DATA-3).

Renewal by supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.(SD-530)

Renewal by Supply and fixing of 48W LED street light fitting (Higher End Philips / Havells /Equivalent) with Pressure die cast aluminium housing with IP65 protection with 25mm dia GI pipe (Class 'B') with 1No 25mm GI Bend complete on the post / wall with PVC unsheathed Copper leads MS clarnps and aluminium painting. (SD-535)

Renewal by Supply and fixing of Philips make TwinGlow 4'-20W Up Down LED Batten with TW round blocks on wall with PVC unsheathed Copper leads from terminals to the fitting. (DATA - 4)

Renewal by Supply and fixing of 30W orbit LED cylinder type down light (Crompton / Havells / Eq) with ceiling suspended ceiling with PVC unsheathed Copper leads from terminals to the fitting.(DATA - 5).

Renewal by Supply and fixing of Luker make bonita Antique Pendant type luminaire with E27 Base to house 1No. of 9W LED (Philips / Havells / Eq) with suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting. (DATA - 6).

Renewal by Supply and fixing of 40W LED Supra Neo II (T) ECO round High bay well glass industrial fitting of IP 66 rating (Crompton make TIP - 311-40-57-SL-CP-NSG) in PDC housing with efficacy of 110lm / W with suitable special type of MS clamps with PVC unsheathed copper leads from terminals to the fittings. (DATA - 7)

Renewal by Supply and fixing of 70W LED Surround Neo (T) ECO round High bay industrial fitting of IP 66 rating (Crompton make LWV12-70-CDL) in PDC housing with efficacy of 110lm / W with suitable special type of MS clamps with PVC unsheathed copper leads from terminals to the fittings. (DATA - 8)

Renewal by Supply and fixing of post top for compound with 45W LED Gate light fitting (Crompton make LPTOl-45-CDL) with Pressure die cast aluminium housing with IP65 protection with 32mm dia GI pipe (Class 'B') with 1No 32 mm GI Bend complete on the post / wall with PVC unsheathed Copper leads MS clarnps and aluminium painting. (DATA - 9).

Renewal by Supply and Fixing of Decorative integrated 9W LED wall Bracket (Luker/Philips / Havells /Equivalent) on Wall with PVC Unsheathed Copper Leads from terminals to the Fitting. (DATA-10)

Renewal by Supply and Fixing of Decorative crystal wall light wall (jacquar /Equivalent) on Wall with PVC Unsheathed Copper Leads from terminals to the Fitting. (DATA-11)

Renewal by Supply and fixing of 4Nos of High Efficiency (4 x60W ) Flood Light Luminaire of K-Lite make Aston KL-4200 on 6mtr hi-mast area lighting pole of K-Lite make KP-8324 to be mounted on suitable concrete foundation with necessary bolts and nuts and Supply and fixing of 3nos of 6A SP MCB (Legrand/ Hager make) ,4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting.(DATA -12)(Face lighting)

Renewal by Supply and fixing of 2Nos of High Efficiency (2x50W) Luminaire of k lite make KP-6791 pelicon fort light (DA) KP -8355 Pelicon Mini orna Florian lighting pole on 6mtr pole k lite make to be mounted on suitable concrete foundation with necessary bolts and nuts and Supply and fixing of 3nos of 6A SP MCB (Legrand/ Hager make) ,4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting. (DATA-13)

Renewal by Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp(SD-107).

Renewal by Supply and fixing of 300mm (12") sweep (Light duty) AC exhaust fan complete without provision of holes in the wall (SD-115)

Renewal by Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan (SD-120).

Renewal by Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD - 460)

Renewal by upply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (SD - 486)

Renewal by Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End for computer plug socket. (SD - 474)

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)(SD-150)

Renewal by Supply and fixing of 32A DP MCB in sheet steel enclosure in flush wall with earth connection. The DP MCB & Enclosure should be of Legrand / Hager make only (DATA-14).(Ups and street light)

Renewal by Supply and fixing of 8way single pole and neutral MCB Double door type sheet steel enclosure Distribution board with IP 42 protection with 1No 32A DP MCB as incoming and 6Nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. The MCB DB and MCB's should be of Legrand/Hagger make (SD-601).

Renewal by Supply and fixing of Horizontal type 4 way triple pole and neutral MCB DB in sheet steel enclosure of Double Door type with metal door IP 42 protection with 1No 40A FP MCB isolator as incoming and 12 Nos. of 6A to 32 A SP MCB's as outgoing in flush with wall with earth connection only. The MCB DB and MCB's should be of Legrand/Hager make. (SD-619).(GF-2,FF-2,Existing-1)

Renewal by Supply and fixing of Vertical type 4 way Triple pole and neutral MCB Distribution board in sheet steel enclosure of double door type with metal door with IP42 protection in sheet steel enclosure with 1 No. of 100A FP MCB as incoming and 4 Nos. of 63A TP MCB in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be Legrand/Hager make only.(DATA-16)

Renewal by Supply and fixing of Vertical type 6 way Triple pole and neutral MCB Distribution board in sheet steel enclosure of double door type with metal door with IP42 protection in sheet steel enclosure with 1 No. of 100A FP MCB as incoming and 6 Nos. of 63A TP MCB in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be Legrand/Hager make only.(DATA-17)

Renewal by Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour (SD-54).(UPS wiring)

Renewal by Supply and run of 2 of 2.5sqmm (36/0.3) VC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(set plug) (SD-399).

Renewal by Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitablecolour (SD - 56)(15A plug,20A plug,LDB and DP)

Renewal by Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD-60)(for HDB)

Renewal by Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-748)(For VTPN)

Renewal by Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-746)

Renewal by Supply and clarnping of3 1/ 2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-224)

Renewal by Supply and clarnping of3 1/ 2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-222)

Renewal by Supply and fixing of brass cable gland for 3 1/2 x 25 sq.mm. PVC LTUG armoured cable with earth connection.(SD-186)

Renewal by Supply and fixing of brass cable gland for 3 1/2 x 50 sq.mm. PVC LTUG armoured cable with earth connection.(SD-188)

Renewal by Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(SD-235)

Renewal by Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(SD-235)

Renewal by Supply and run of 4x25sqmm (168/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD-455).

Renewal by Supply and run of 4x25sqmm (168/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in Suitable dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains. (SD-456)

Renewal by Supply and laying of 2 of 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre and laying the cable through 50/38mm dia HDPE Pipe of Class 5 and refilling the earth to make good (DATA-18).

Renewal by Supply and clamping of 2 of 10sqmm PVC LTUG armoured cable on post or on wall with MS clamps. (SD-216)

Renewal by Supply and fixing of brass cable gland for 2x10sqmm PVC LTUG armoured cable with earth connection. SD-183).

Renewal by Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with interb connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete. (SD-130)

Renewal by Supply and fixing of 3 Phase 100A aerial fuse unit for 3Nos 63A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps. (DATA-19)

Renewal by Supply and erectIon of 3.00KVA sinewave / 36 V DC line interactive Technology Inverter system for existing load purpose with 3Nos inverter range 12V/150AH capacity Tall tubular battery for 1hour backup time depending upon the load condition with connections complete. The Technical specifications of the inverter shall be as follows.

a)Capacity 3000VA / 60 Volt DC. with pure sinewave, b)Input voltage range 170V to 270V AC single phase. c)Output Voltage 230V AC d) Back time 1 Hour. e)Digital indication Showing Mains ON,Inverter ON,Low Battery, Battery Voltage, Connected load in watts. f)fuse Protection ,in built resettable circuit breaker Protection .(Inverter make Exide/ Microtek or Eq) g) Battery should be Exide make INVA Master/ Luminous make /Eq with warranty not less than 36 months h) Steel Stand to house inverter and batteries. (SR)

Renewal by Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch. (SD - 105)

Renewal by Supply and fixing of 12" Gong bell with timer suitable for 230 Volts 50 c/s Single phase AC supply on suitable 375x300x15 mm TW board with push switch (DATA-20).

Renewal by Supply and run of No.8 SWG Copper conductor in suitable PVC rigid pipe on wall for earth connection (SD-458)

Renewal by Supply and fixing of heigh ceiling suspended ornamental Lancia crystal type Chandlier fitting with necessary connection leads, brass chain etc., (DATA- 21)

Supply, erection, testing and commissioning of 2.0TR (6000 K Cal / Hr) ABS Plastic Split type Airconditioner conforming to IS : 1391 (Part 2) 1992 with Amdt. No. 1 to 2 fitted with rotary compressor operating refrigerant R - 22 / Non- CFC suitable for wall mounting for operation on 230 Volt, 50 HZ Single Phase AC supply with star rating of 5 as per BEE specification and capable of performing the functions of 1) Cooling, 2) Dehumidifying, 3) Air circulating, 4) Filtering The installation works for the above split type AC units includes the following :

1) Mounting / Fitting indoor and outdoor units at the respective locations. 2) Laying refrigerant pipeline of required length not exceeding distance and connecting both units after drilling hole / holes in the wall, if required. Thickness of copper tubing shall not be less than 0.7mm. 3) Insulating the suction pipe with expanded polyethylene foam 5mm tubing. 4) Laying 15mm dia flexible PVC drain pipe to throw out the condensate water being formed within indoor unit. 5) Leakage testing the entire system. 6) Charging refrigerant gas in the unit. 7)Suitable electric wiring to be provided with 2.5sqmm PVC insulated copper wire between indoor and outdoor units upto 6 mtrs length and upto switch within 3 mtrs of location of indoor unit (Carrier / Voltas eq ) (M-1986)

Supply and Installation of 5KVA Electronic Automatic Voltage Stabilizer V- GUARD make VGS 400 Model with Input Voltage range of 170Volt - 270Volt and Output Voltage range 200Volts to 240 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. (M-1989)

Supply and fixing of MS stand for fixing outdoor unit. (M - 1991)

Supply and fixing of 5/8" and 3/8" copper pipe. (M-1990)

Renewal by Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-233).

T PAULKANNU & CO

KARTHIKEYAN ELECTRICALS