GE I R AND D/CHD-24/2022-23

Amount

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall and fixed along the centre line over fittings and accessories) complete all as specified and directed.

Dismentling of cast iron or reinforced concrete pipes(any size) at any situation fixed any mortor, including all fittings complete all as specified and directed.

Demolition and breaking up drain pipes of 150mm internal dia (Salt glazed stone water or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition of reinforced cement concrete as in cover slabs of manhole or septic tank, soak pit and walls, basement walls and in foundation complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed : Note ( Reterived Material disposed off in low line area at any distance).

Demolition of brick or stone masonry work, built in cement mortar incl all quoinns, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, scrabing for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of wrought iron mild steel work of any description or from nay position complete all as specified and directed.

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortor (1:6) complete all as specified and directed.

All as per serial Item no 9.00 above but bricks complete all as specified and directed.

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan t any radius in half brick thick walls built in cement mortor ( 1:4) )complete all as specified and directed.

Material and labour for rendering 15mm in two layer (10+5) thick in CM (1:4) on fair faces of brick/concrete surfaces of walls mixed with water proofing compound and finished fair and even (without using extra cement ) complete all as specified and directed. (Note : WPC will be measured and paid separately)

Material and labour for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint on walls complete all as specified and directed

Material and labour for rendering 15mm thick on fair faces of brick work surfaces in internal wall with CM (1:6) complete all as specified and directed.

Material and labour for applying two coats of OBD on new plastred surfaces of wall complete all as specified and directed.

Supply only liquid water proofing compound.

Supply and fixing for 110mm dia PVC (SWR) rain water pipes single socketed, in any length with rubber ring joint fixed to wall complete all as specified and directed.

Supply and fixing for 75mm dia PVC (SWR) water pipes single socketed, in any length with rubber ring joint fixed to wal lcomplete all as specified and directed.

Supply and fixing for 110 mm dia PVC shoe of approved make complete all as specified and directed.

Supply and fixing for 110mm dia PVC (SWR) bends any radius of approved make complete all as specified and directed.

Material and labour for 110mm bore PVC (SWR) junction singe (Single T) equal or unequal complete all as specified and directed.

Supply and fixing for PVC (SWR) vent cowl for 75mm dia pipe complete all as specified and directed.

Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

Supply and fixing of CI 100mm dia, sand cast, soil, waste and vent pipes, in any length with or without ears with Drip joint fixed to wall complete all as specified and directed.

Supply and fixig of 100mm CI bends (any radius) with duck's foot or heel rest\ complete all as specified and directed.

Supply and fixing of 75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with Drip joints,laid in wall complete all as specified and directed.(ISI Mark).

Supply and fixing for cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and directed.(ISI Mark).

Supply and fixing of 75mm Cast iron floor traps with grating including jointing to waste pipe with Drip joint fixed cncrete type B1 (1:2:4). complete all as specified and directed.(ISI Mark)

Supply and fixing for Stack clamps out of 50 mm by 5 mm flat iron any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

Supply and fixing of 150mm internal dia of salt glazed stoneware pipes laid in trenches complete all as specified and directed.

Supply and fixig of 150 mm salt glazed stoneware bends (any radius) of 150mm dia of bore diminishing pieces or tapers (large bore measured) complete all as specified and directed.

Material and labour for providing precast RCC cover slab (1:2:4) type B-1 (for man holes, drain cover etc) (using 20mm graded stone aggregates) including necessary use and waste of formwork and set in CM (1:6) complte with joints to match complete all as specified and directed.

Material and labour for plain cement concrete type B-1 PCC (1:2:4) (using 20mm graded granite stone aggregate) as in benching of manholes, roof kerbs, mud stops, rounded or chamfered on edges complete all as specified and directed

Materials and labour for plain cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in surface channels and drains complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested completely surroundiung for 150mm bore of pipes with complete all as specified and directed.

Material and labour for cutting to existing manholes for 150mm internal dia pipe making good to pipe and rendering, cutting out exiting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching complete all as required and directed.

Material and labour for cleaning & removing of sludge, soil, mud etc from sewage pipe lines including manholes by rodding using MS rod tied with jute/gunny bags between manhole to manhole and flushing down with water removing the sludge to a distance n.exc 50 mtr away from the starting point depositing in pits n.less than 30cm from existing ground level including sprinkling with bleaching powder over the area of pit & cleaned manholes complete all as specified and directed.

Material and labour for taking out sludge from MH and removing the ame to a distance n.exc 50 mtr from the starting point nd depositing in the pits n.exc 10 sqm on plan & n.exc 1.50 mtr depth and covered with ordinary soil and sprinkling with bleaching powder complete all as specified and directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr depth for foundation etc in soft/loose soil.

Material and labour for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns,plinth band, lintels etc hooking ends and binding with a including mild stell wire (annealed) not less than 0.90mm dia or securing with clips quality conforming complete all as specified and directed.

Supply and fixing of framed work such as grills, gratings etc wth ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors,Ms Plain sheet, XPM, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge.

Supply and fixing steel window (box type) with gaused shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) MS fillets,MS Grills, glazing, wire gauge shall be measured and paid separately.

Description all as per Srl Item No. here in before but without glazing bar complete all as specified and directed. Note : (i) MS fillets, wire gauge shall be measured and paid separately.

Supply and fixing for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Material and labour for preparation of new steel surfaces exceeding 10cm width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for fixing of 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified including dismantling.

Material and labour for PCC (1:2:4) Type B-0 using (12.5mm graded stone aggregate) as in coppings as in brick wall duly rounded or chamfered on edges all as specified and directed.

Material and labour for 100mm thick cement concrete type B 1 PCC (1:2:4) (using 20mm graded aggregate) as in hard standing finished even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Material and labour for Glass dividing strips, 3mm thick of 38mm width complete all as specified and directed.

Material and labour for PCC chequered tiles with grey cement and pigment 30cmX30cmX25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over 15mm thick screed bed CM (1:6) complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in plinth protection/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mmgraded stone aggregates as in Floor/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and any size confirming to IS-15658-2006 of thickness 80mm thckness M-40 grade, with grey cement and pigment complete all as specified and directed

Material and labour for sand cushioning under floors including watering and consolidation . complete all as specified and directed.

Material and labour for clearance and removing of bushes vegetation growth including taking out roofs of bushes/vegetation growth upto 30 cm deep and disposal of rubbish to a distance not exc 100m complete all as specified and directed.

Material and labour for cleaing and removing all scale and dirt etc, from tanks exceeding 500 & n.exc 1000 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

Material and labour for cleaing and removing all scale and dirt etc, from tanks exceeding 250 & n.exc 500 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles dado complete all as specified and directed.

Material and labour for Virified colour Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finish complete all as specified and directed.

Material and labour for Virified colour Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finish complete all as specified and directed.

Material and labour glazed ceramic coloured tiles in vertical surfacaes 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. and as approved by GE.

Material and labour for Non-skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Supply and fixing in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and directed.

Supply and fixing in repair vitreous China squatting pan, 'Orissa' pattern, size 580x 440 mm white, with integral foot rests including a provision of concrete bedding complete all as specified and directed.

Supply and fixing in repair 10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets, fixed in repairs complete all as specified and directed.

Supply and fixing for vitreous china wash hand basin white, flat back size 550x400 mm ,waste coupling excluding tap chain, plug but including brackets and cutting for providing ends of brackets, complete all as specified and directed.

Supply and fixing for CP Angle cock /single/double pin screwed down for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Supply and fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair stainless steel grating doom 100mm dia with or without hole complete all as specified and directed.

Supply and fixing for 32/40 mm dia PVC waste pipe for WHB/sink complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore.

Material and labour for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore.

Material and labour for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm complete all as specified and directed.

Supply and fixing for Brass for CP shower rose 125mm size complete all as specified and directed.

Supply and fixing for plastic WC cover white/coloured closed pattern with flat bottom and cover fixed with mild steel CP or Aluminium hinging device complete all as specified and directed.

Material and labour for wash hand basin mixer, fancy type chromium plated, brass 15mm bore and including all connected accessories.

Material and labour for wall mixer, fancy type, chromium plated, brass 15mm bore and including connected accessories.

Material and labour for CP brass jet for EWC along with flexible pipe (minimum length 1 Mtr).

Material and labour for CP brass soap dish.

Material and labour for CP Brass health faucet alongwith flexible pipe 1mtr length

Material and labour Glass corner shelf of size 250mm complete all as specified and directed.

Material and labour for 15mm bore pillar taps fancy type, cast copper alloys, with capasten heads, cromium plated, scewed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nut, screwed for iron pipes.

Material and labour cast copper alloys chromium plated bib taps long body, fancy type 15mm size with crutch or butterfly handle, screwed down, screwed for iron pipe. ( Note :- weight of Each itemes in mini 400 gm )

Material and labour Towel Rails 20mm dia, D type 60 cm long S/S.

Supply and fixing CP Cancealed Stop cock screwed down for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Supply and fixing in repairs 32mm Brass chroumium plated bottle traps for wash basins with inlet and out let screwed for iron pipe or connections including necessary packing ,union and all as specified and directed.

Returning , filling in, including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing of excavated materials (soils) to a distance any distance depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and directed

JOGINDER NATH GUPTA AND SONS

M/S MATLOOB AHMED

shree balaji builders

M/s APEX ENTERPRISES

KUKREJA ENGINEERS

D.N.Gupta and Sons

SONA BUILDERS