WBPWD/EE-II/CKHED/ eNIT-49/24-25

Amount

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (18-nos) [ D-6,7 ]

6 way [Legrand/ L&T]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,32A, DPMCB Isolator (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (4-nos) [D-6,7]

2+12 way [Legrand/ L&T]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for Horizontal enclosure (TPN DB) with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [D-12,16]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (RR Cable/KEI/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching colour) top cover 3 mm thick and incl.175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS. [E-14,2 ]

Average run 8 mtr [E-14,2(c)]

On board [E-15,(a)]

Supply and Fixing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire(RR Cable/Finolex/ /Polycab/KEI) as approved by EIC) of the following sizes in 20mm/25mm/32mm the PVC Rigid Conduit 'FR' [Make-Precision] on wall, ceilling with saddle and other accessories as required and mending good damages to building works.

3x1.5 sqmm ECC [ E-9,1(b) & E-16,7(a) ]

2x2.5 sqmm+1x 1.5 sqmm ECC [ E-9,1(s) & E-16,7(a) ]

2x4 sqmm+1x 2.5 sqmm ECC [ E-9,1(v) & E-16,7(a) ]

4 x 16 sqmm + 2 x 10 sqmm ECC) [ E-9,1(g1) & E-16,7(b) ]

2x6 sqmm+1x 4 sqmm ECC) [ E-9,1(y) & E-16,7(a) ]

Supply & Fixing 240 V, 2nos, 16A, plug socket (Combo) with separate 2nos, 16 A Piano key type switch (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 200x150x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (E-4/11d, 12d,E-5/14a,b, 15a,b)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-4/11e, 12e, E-5/14a,b, E-5/15a,b)]

Supplying & Delivery of 250 volts, 50Hz, sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to Gs.

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [D-14,33 ]

30 cm Exhaust (12”) (300 MM) [D-14,33 ]

Supplying & Delivery of following 250 Volt, T8, 18/20 Watt, 4 Ft. long Double LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(LT8-20-865-(2)) having at least 100 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 502 P 2xT-LED 22W P3241 /Similar wipro/Lighting technology)

Supplying & Delivery of following 250 Volt, T8, 18/20 Watt, 4 Ft. long single LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(LT8-20-865-(2)) having at least 100 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 502 P 1xT-LED 22W P3241 /Similar wipro/Lighting technology)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “U” type MS clamp whose both side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” /"Z" type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2,17 ]

S & F Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]

Supplying & fixing of 240V, 50Hz, highly efficient 250 Watt LED flood light with driver inside a PDC housing. Which: i) Fixture & Driver should be same make and BIS approved. ii) Driver: Fixed output, high cut off voltage 325V and 440V . [Make- Similar wipro/Lighting technology [ Liability period 2-years]

Supplying & fixing of 240V, 50Hz, highly efficient 100 Watt LED flood light with driver inside a PDC housing. Which: i) Fixture & Driver should be same make and BIS approved. [Make- Similar wipro/Lighting technology) [ Liability period 2-years]

Supplying & fixing of 240V, 50Hz, highly efficient 150 Watt LED flood light with driver inside a PDC housing. Which: i) Fixture & Driver should be same make and BIS approved. ii) Driver: Fixed output, high cut off voltage 325V and 440V . [Make- Similar wipro/Lighting technology) [ Liability period 2-years]

Supplying & fixing of 240V, 50Hz, 110-120 lumen / watt , 22W T-LED

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ]

2x2.5 sqmm+1x 1.5 sqmm ECC [ F-5,9(i)]

2x4 sqmm+1x 2.5 sqmm ECC [ F-5,9(ii&i)]

4 x 16 sqmm + 2 x 10 sqmm ECC) [ F-5,9(v&iv)]

2x6 sqmm+1x 4 sqmm ECC) [ F-5,9(iii&ii)]

4x 2.5 sqmm ECC [ F-5,9(i)]

Supplying & fixing of 250 volts, 50 Hz 1200mm (48”) sweep A.C. ceiling fan complete with all accessories viz. down Rod, Canopy, Fork etc. including connections as reqd. as per choice of E.I.C. (Make-Crompton HS plus/ Orient Energy star)

Supply & Fixing 240 V, 25 A, 5 pin Modular type plug socket without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make:- Legrand/Cabtree)

Supply & Fixing 240 V, 25 A, Modular type starter with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make:- Legrand/Cabtree) [E-19,17 ]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Norysis) & necy.Connections (E17/5(b)).

Supply & Delivery of 2 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 Nos. rotary compressor, refrigerant R-410A, 1 nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. (Make: Voltas/ Hitachi/ O General/ DAIKIN)

Supply & Delivery of 1.5 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 Nos. rotary compressor, refrigerant R-410A, 1 nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. (Make: Voltas/ Hitachi/ O General/ DAIKIN)

Supply & Laying Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku)

Liquid Line (1/4" OD with 0.6 mm thick)

Suction Line (5/8" OD with 0.7mm thick)

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Accoflex)

Liquid Line (1/4" OD with 0.6 mm thick)

Suction Line (5/8" OD with 0.7mm thick)

Supply & Laying Control copper Cabling from Condensing Unit to control panel (Make: polycab/finolex)

4 core 2.5 sq.mm communication cable

S & L of Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

25 mm/32 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

upto 2nd floor

upto 4th/5th floor

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (50 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 40 mm x40mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (40 mm x 40 mm x 6 mm) Angle inserted into the exiting wall. The entire structure should be barricaded & safe for ODU maintenance. Area of the platform is 3Mtr. x 1.2Mtr. Structural design should be approved by E.I.C.

Charges for civil work like wall cutting, plastering, painting and allied works as per requirement of the site and as per direction of EIC.

Cutting Iron window and Making door there for passege of outdoor maintenance.The charges of welder charges,mation charge, shifting, Fixing, labour charges and all material chips,Sand,Cement etc and mending good damages to original finish as per instruction of EIC

Erection, Commissioning & Testing of 2 TR/1.5 Tr concealed type Split Air Conditioner.

S& F full metal body 240v, 450mm dia wall bracket fan (EPC , Tempest, 3 Blade)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D-14,29]

Dismantle existing wiring switch boards, light fittings, one no unservicable air conditioning machine etc.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1)1 year

GHANASHYAM ELECTRIC STORES (BID ID -5612758)

STANDARD BUILDERS (BID ID -5585351)