GE (W)/HSR-34/2024-25 PROVN OF SGB REPAIR BAY AND CHAIN LINK FENCE AND CERTAIN MINOR WORKS

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

M&L for Surface dressing n exc 15cm deep in Soft/Loose soil complete all as specified and directed.

M&L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 10cm thick (in tranches and surface), watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete complete all as specified and directed.

M&L RCC M-25 Design Mix as in slab supported by wall or beams etc complete all as specified and directed.

M&L RCC M-25 Design Mix as in lintel, plinth, beam etc complete all as specified and directed.

M&L RCC M-25 Design Mix as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 Design Mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 with WPC on roof surface, complete all as specified and directed.

M&L applied a coat of bituminous primer confirming to IS-3384@ 40 Kg per Sqm APP BASED POLYMERIC MEMBRANE NOT LESS THAN 3 MM THICK WEIGHING NOT less than 3mm thick weighing not less than 3Kg/sqm reinforced with polyster non woven fabric (weighing not less than 15gm/sqm) and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be laid dry torch application, side civerlaps shall be 75mm and end slab shall be 100mm and all over laps joints shall also be sealed by torch application including one coat of bituminum paint complete all as specified and directed.

M&L for 50mm cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 20 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Gde E-165 (Fe-290) complete all as specified and directed.

Mild steel TMT bars exc 5mm and n.exc 10mm dia for stirrups and other work bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gde E-165 (Fe-290) complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on walls in CM 1:6 complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:4 complete all as specified and directed.

M&L Rendering 5 mm thick on fair faces(ceiling) on concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:3 complete all as specified and directed.

M&L two coat of cement base paint on walls including preparation of newly untreated surface with a coat of cement wash with portland cement complete all as specified and directed.

M&L applying three coat of white wash on new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M & L two coat of oil bound distemper on new plastered surfaces of walls including 3mm wall putty and preparation of surfaces complete all as specified and directed.

M&L for 75 mm PCC of 1:4:8 type D-2 under sub base of path, all as specified and directed.

M&L chequered cement concrete tiles 30cmx30cmx25mm / 25cmx25cmx25mm thick with mixer of gray and white cement in equal proportion and no pigment, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coping of type C-1, 1:3:6 of 20 mm graded aggregate complete all as specified and directed.

M&L for coloured vitrified tiles 10mm thick (square/rectangular) of size exc 0.42 Sqm n. Exc 1 Sqm in floors etc set & , including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mm thick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated Anodised aluminium door/ windows shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid separately.

S&F door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed complete all as specified and directed.

Supply and fixing 4.8mm thick tinted sheet glass ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane complete all as specified and directed.

Supply and fixing 4.8mm thick tinted sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F powder coated aluminium deco grill fixed to powder coated windows complete all as specified and directed.

S&F as in brass Mortice lock, vertical type, 4 lever size 100 mm complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, and removing surplus soil to a distance n.exc 50 m in soft/ loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

S&F MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. grills, gratings, etc.. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintl hinges, and staples; chains; hand-made sliding bolts, clamps; hold fasts, wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, pate washers and similar small articles conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L mild steel round bars 10mm dia and over, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Gde E-165 (Fe-290) complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for 20 mm Granite (black in colour) work in steps, jambs, pillars, window-cills, cooking plateform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete (including the required excavation for kerb stone placing, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over after preparation of new/old concrete surfaces complete all as specified and directed.

M&L of cement concrete type B1 1:2:4 (20mm graded aggregate) complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concretepaver block of M-30 grade with approvedcolour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

All as per item No 58.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

All as per item No 58.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

All as per item No 58.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings with LED bulb 9 Watt complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F i Sheet metal enclosure distribution board SPN, 8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

M & L for Sub main wiring with approved colour coding as per IS with three single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Three runs of 6 sqmm cable for RYB Phases ,one run of 6 sqmm cable as earth wire and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion, complete all as specified and as directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply , laying , jointing, testing and commissioning of size 35 sqmm 3.5 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed. Note : Excavation, earth work, sand cushion & brick protection shall be paid separately.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable of LT under ground/laying cable all as specified and directed.

Returning, filling in, any type of soil and spreading in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus soil ( any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. Note : Thickness after punning shall be considered for payment.

M&L for brick protection with old size sub class 'B' bricks flat laid , length of bricks across the route of underground cable complete all as specified and directed.

S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.

S&F Sheet metal enclosure distribution board TPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts washers proper with pcc works complete all as specified and directed.

Supply and fixing MCBs FP 63 Amps, 415 volts, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply & Fix exhaust Fan, Steel Body AC Single Phase 230 V of size 300mm sweep with blades and frame and 200 Volts complete all as specified and directed.

Supply & Fixing BLDC (Brushless direct current motor) ceiling Fans complete with blades down rods electronic regulator and accessories 230 V Min air delivery 225 CFM 35 watt speed RPM above 340 in white colour with remote control & copper winding with service value 6.0, BEE, five star rated complete all as specified and directed.

Supply installation commissioning of metal top deep-fridger single phase 240 volt, 50 Hz 500 litre complete all as specified and directed.

Supply and fixing double door refrigerator , electric driven (single phase) fresh food capacity of 310 litre, complete all as specified and directed.

M&L for installation in below ground level 1 x 5000 Ltrs capacity 3 layers PVC storage tank including earthwork and all fittings complete all as specified and directed.

M&L for installation 2 HP mono block motor including grouting with 4 x Nut bolts on 600mm x 600mm x 300mm PCC base foundation and all fittings such as GI/PPR fittings sockets/Elbow/Reducer/ Union etc complete all as specified and directed. Make : Kirloskar/CG/Lubi/CRI/KSB

M&L for installation and testing 500 LPD ETC type Solar Water Geyser with tank structural frame, heating elements with thermostat and CPVC fittings from system to system all inclusive complete all as specified and directed. Make : Matrix Solar, Model : MX-GI-35, Tubes :58mm x 2100mm x 35 tubes.

Supply, laying, jointing and testing PPR pipe (PN16) (3 layer) 25mm size with all fittings, Tee, Socket, Union, flange and socket confirming to IS-15801, laid in trenches or along wall or roofs and in floors etc complete all as specified and directed. Make : Supreme/Finolex/SFMC/Prince/SHK

Supply and fix PPR gate valves, with iron wheel head, screwed both ends for iron pipe 25mm bore fixed confirming to IS-15801, laid in trenches or along wall or roofs and in floors etc complete all as specified and directed. Make : Supreme/Finolex/SFMC/Prince/SHK

Supply, laying, jointing and testing PPR pipe (PN16) (3 layer) 20mm size with all fittings, Tee, Socket, Union, flange and socket confirming to IS-15801, laid in trenches or along wall or roofs and in floors etc complete all as specified and directed. Make : Supreme/Finolex/SFMC/Prince/SHK

Supply and fix PPR gate valves, with iron wheel head, screwed both ends for iron pipe 20mm bore fixed confirming to IS-15801, laid in trenches or along wall or roofs and in floors etc complete all as specified and directed. Make : Supreme/Finolex/SFMC/Prince/SHK

Supply, laying, jointing and testing PPR pipe (PN16) (3 layer) 40mm size with all fittings, Tee, Socket, Union, flange and socket confirming to IS-15801, laid in trenches or along wall or roofs and in floors etc complete all as specified and directed. Make : Supreme/Finolex/SFMC/Prince/SHK

Supply and fix PPR gate valves, with iron wheel head, screwed both ends for iron pipe 40mm bore fixed confirming to IS-15801, laid in trenches or along wall or roofs and in floors etc complete all as specified and directed. Make : Supreme/Finolex/SFMC/Prince/SHK

moti construction company (BID ID -3072031)

M/S RAJESH KUMAR & SONS (BID ID -3082766)

M/S KAVITA CONSTRUCTION (BID ID -3069695)

SHRI HARI BUILDERS (BID ID -3071716)