8588REPAIR MAINT OF INTERNAL ELECTRIFICATION AT 7th CAMP OFFICERS ACCN AND IMH AREA UNDER GE M AFS JALAHALLI BANGALORE

Amount

Taking down carefully copper/aluminum point wiring (light, fan,Power) complete fittings such as switches , ceiling roses pendents , regulators sockets light fittings etc removing to store for keeping in safe costody or for taking credit and making good disturbed surface of wall, floors , roof etc all as specified.

Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on surface of wall including provn of PVC box of suitable size duly sunken the wall for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm for One light point controlled by one switch one way 5 Amps all as specified and directed.

All as per item Srl No 2 above but One light point controlled by one two way switch 5 Amps

All as per item Srl No 2 above but One ceiling fan point controlled by one switch one way 5 Amps

All as per item Srl No 2 above but One Exhaust fan point controlled by one switch one way 5 Amps

All as per item Srl No 2 above but One call bell point controlled by one switch one way 5 Amps

All as per Sl Item no.2 but with One 2/3 pin socket outlet 5Amps on independent board

All as per item No 2 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

Supply and fixing switch piano flush type single pole one way 5 Amps

Supply and fixing switch piano flush type single pole two way 15 Amps

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm

Supply and fixing Call bell push flush type single pole one way 5 Amps

Supply and fixing in repair stepped type electronic fan regulator flush type 100 Watts

Supply and fixing switch socket combination 2 in 1, 3 pin 5 Amps flush type

Supply and fixing Switch socket combination multipurpose 5/16 Amps, 5 in 1, 4 / 5 hole flush type

Supply & fix in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 20 Watt.Make : Bajaj. Item Code-830338 Ivora LED Battan 20 W CDL or equivelent WIPRO/CG/Havells/Philips

Repairs to recessed /Surface mounted / ceiling mounted / Flame proof/ Bracket mounted light fitting incl Bldg security light fitting of any type of 9/14/20/28/36 watt including replacing all the unserviceable parts such as, LED light fitting, tube rod, LED bulb, building security light fitting & bulb holder all as directed. Note: (i) The unit rate quoted shall be deemed to include for replacement of worn out bolts, nuts, screws ,washers, partly wiring etc wherever required. (ii) Spares such as tube rod of any type, LED light fitting & LED bulb etc. will be paid separately under approprite items.

Supply only T-5 tube rod 28 watt.Havells/Bajaj/CG

Supply only tube rod T-5, 14 watt.Havells/Bajaj/CG

Supply only LED Retro bar tube rod 18/20 watt.Havells/Bajaj/CG

Supply & fix in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use including taking down pack of 20 Watt.Make : Bajaj. Item Code-830338 Ivora LED Battan 20 W CDL or equivelent WIPRO/CG/Havells/Philips

Supply & fix in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use including taking down pack of 20 Watt.Make : Bajaj. Item Code-830379 or equivelent WIPRO/CG/Havells/Philips

Supply & fix in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to including taking down use pack of 10 Watt.Make : Bajaj. Item Code-830339 Ivora LED Battan 10 W CDL or equivelent WIPRO/CG/Havells/Philips

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting & taking down up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing square/round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up & taking down with three core flexible copper conductor cable of suitable size complete. Make : CG or equivelent WIPRO/Havells/Bajaj/Philips

Supply and fixing building security/ LED street light fitting 35 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal, management in multiple optics & taking downcomplete with IP 65/66 protection complete. make Bajaj/ Philips/OSRM/KRIPA/CG.

Supply and fixing in repair LED Lamp 9 watt including taking down . Make :Bajaj. Item Code-830053 or equivelent WIPRO/CG/Havells/Philips

Supply and fix in repair Modular switch 1way 6A,1module including taking down

Supply and fix in repair Modular socket, 6A-2/3 pin combined 2 module including taking down

Supply and fix in repair Modular switch, 16 A 1 module including taking down

Supply and fix in repair Modular socket, 6A/16A-2/3 pin combined 2 module including taking down

Supply and fix in repair Modular fan step regulator, 120w-2module including taking down

Supply and fixing in repair of switch socket combination 2 in 1, 3 pin 5 Amps flush type including taking downcomplete all as specified & directed.

Supply and fixing in repair of Switch socket combination multipurpose 5/16 Amps, 5 in 1, 4 / 5 hole flush type including taking down complete all as specified & directed.

Supply and fixing in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc including taking down

Supply and fixing in repair Lamp holder angle type made of PVC/Polycarbonate with back plate. including taking down

Supply and fixing in repairs Plastic laminated sheet for switch boards, MCB DB Covers cutting to suitable size including making slots for fixing swithces, sockets regulator,MCBs etc. & other purposes as required complete including & taking down replacement of rusted screws, nuts bolts. .

Supply and fixing in repair of MCCB 125 amps 4 pole 16 KA 415 volt complete including taking down all as specified & directed.

Supply and fixing in repair of MCCB 100 amps 4 pole 16 KA 415 volt complete including taking down all as specified & directed.

Supply and fixing in repair of MCCB 63 amps 4 pole 16 KA 415 volt complete including taking down all as specified & directed.

Supply and fixing in repair, sheet metal enclosure distribution box suitable for MCB'S 4 way TPN 415 volts with 200 Amps rated bus bar double door complete including connecting upb& taking down all as specified and making good distrubed surface

All as per item No. 42 above but 12 way SPN with 200 Amps rated bus bar , 240 volts

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including down.

Supply and fixing amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TP 25 To 63 AMP current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 25 To 63 AMP current carrying capacity in the DB complete with connection testing and commissioning.

Taking down sub main wiring of any size complete all as specified and directed.

Material and labour for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 4 sqmm copper conductor cable as earth conductor of 4.0 sq mm and conduit accessories fixed up in surface including connecting up complete all as specified and directed.

All as per item no 48 but cable size of 6.0 sqmm

Material and labour for sub main wiring with Four single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 6 sqmm copper conductor cable as earth conductor of 6.0 sqmm and conduit accessories fixed up in surface including connecting up complete all as specified and directed.

All as per item no 40 but cable size of 10.0 sqmm Note for item No 48 to 51 :-Two/four run of cable and one run of earth continuity copper conductor and non metalic PVC conduit shall be measured as one unit length.

Taking down ceiling fan of any size, type and make after disconnecting the electrical connections, cleaning, servicing , greasing removing and replacing all the unserviceable spare and re-fixing the same back to the original location all as directed

Taking down Exhaust fan/fresh air fan of size 250/300 mm of any type & make after disconnecting the electrical connections ,cleaning, servicing , greasing removing and replacing all the unserviceable spare re-fixing the same back to the original location all as directed. Note for item No. 54 to 58 : (i) All the replaced spare for unserviceable spares, rewinding will be measured and paid separately (ii) The rate quoted shall be deemed to include the cost of painting and minor spares such as split pin , screws washers etc.

Supply only ball bearing suitable for ceiling fans 1200 / 1400 mm dia sweep.

Supply only ball bearing suitable for exhaust fans 300/450 mm dia sweep.

Supply only ball bearing suitable for wall mounted fans 300/400 mm dia sweep.

Supply only Capacitor 2.5 mfd for ceiling fans.

Supply only Capacitor 4 mfd for exhaust fans.

Supply only the mounting clamps and rubber bush with nut, bolt, washers, locking clip etc complete suitable for fixing at the down rod suitable for fixing the ceiling fan.

Supply and fix GI pipe down rod made out of 15 mm dia GI pipe suitably cut into service including necessary threading / cutting for necessary suitable modifications according to the requirement to fix downrod complete all as specified & directed.

Supply only the gun metal bush for ceiling fan/exhaust fan of any size complete suitable for fixing at the down rod suitable for fixing the ceiling fan.

Supply only twin core flexible wire 1 Sqmm for connecting up ceiling fans, exhaust fans/wall mounting fan etc.

Taking down old burnt out copper winding wire from ceiling fan of 1200/ 1400 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing,heating, cleaning, servicing,greasing,refixing at site,testing, commissioning for smooth functioning complete all as specified & directed.

Taking down old burnt out copper winding wire from fresh air fan/exhaust fan of 230/300 mm sweep and rewinding by using the same gauge of copper wire super enameled including heating and varnishing,cleaning, servicing,greasing, cement work refixing at site and testing commissioning for smooth functioning complete all as specified & directed.

Material and labour for earthing with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25M deep below ground level with top edge of the plate not less than 1.5M below normal ground level connected to galvanised strip 32x6mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab without GI protection pipe but all as specified and directed by Engineer-in-Charge.

Forge Engineering & Electricals

Vasavi Electricals

M/S SRI BALAJI ENTERPRISES

CITIZEN ELECTRICALS

H S S ENGINEERS AND CONTRACTORS

kamadhenu Electricals

mahadevi Enterprises

RRK PROJECTS

Shiva Shakthi Electrical Enterprises