Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC S NO 12 LAXMINAGAR YERWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L1 | Accepted-AOC Being over all reasonable | |
| 2 | L2₹28.8 L+₹4,298.55 (0.15%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹30.9 L+₹2.1 L (7.29%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹34.0 L+₹5.2 L (18.1%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹34.1 L+₹5.4 L (18.7%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
COMPREHENSIVE REPAIR /MAINT IN MD ACCN AT ZONE B AND C AREA IN THE AOR OF AGE B/R-I UNDER GE (CENTRAL) KHADKI.
2023_MES_598636_1
8812/E8 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
ZONE B AND C area
AS PER NIT
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹90,000
Yes
10 Aug 2023
26 May 2023
24 Jun 2023
26 May 2023
22 Jun 2023
10 Jun 2023
26 May 2023 - 3 Jun 2023
Amount
NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.
NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm /300X450X7mm/300x200x7mm thick or equivalent set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar (1:4), pattern as approved. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for Non skid ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile excieeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) all as specified and directed by Engr-in-Charge. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for Glazed vitrified tiles 600x600/600x1200 mm 7 to 8 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) all as specified and directed by Engr-in-Charge. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for Glazed vitrified tiles 600x600/600x1200 mm 7 to 8 mm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:3) all as specified and directed by Engr-in-Charge. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
M&L Machine cut kota stone slab flooring 15-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 15 mm thick screed bed in cement mortar (1:6) including dimolition of floor or wall tiles, stone slab of any description or thickness laid, bedded and pointed in any morter complete all as specified and directed by Engr-in-Charge.
Material and labour for 20-25mm thick machine cut cuddappah stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding polishing including dimolition of floor or wall tiles, stone slab of any description or thickness laid, bedded and pointed in any morter complete all as specified and directed by Engr-in-Charge.
Material and labour for 15-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement 10 mm thick mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dimolition of floor or wall tiles, stone slab of any description or thickness laid, bedded and pointed in any morter complete all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for 15mm thick cemet plalster in CM 1:4 over wall /Chajja concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new plasterd or unplastered surfaces of wall/ceiling and applying two coats of oil bound destemper, including Priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. Note;- (i) before applying cement base paint contractor shall use the wire brush for the removal of loose paint, dust,algae, moss filling of cracks, using crack sealant and cleaning of surface by spray jet.(ii) Application of cement base paint strictly done by spray/mechenical spray only, otherwise 30% cost recovery shall be made from the respecpective item(iii) filling of cracks holes and dents are includes in the same rates.
Material and labour for preparation of old plasterd or unplastered surfaces of wall/ceiling and applying one coat of oil bound destemper complete all as specified and as directed.
Material and labour for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of wall/ceiling and applying two coats of oil bound destemper, including priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed.
Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and as directed.
Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint complete all as specified NOTE :- Building height for said item will be upto 15 metre
Material and labour for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. NOTE :- (i) filling of cracks,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat. (iii) Building height for said item will be upto 15 metre
Removing old tar felt, all loose dirt, old roof tiles, including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.
Material and labour for sunken flooring as per following details complete all as specified and directed (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance of 5KM to 7.5KM .(b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc.(c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or equivalent as given in Appx 'E'.) (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'E' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'E'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'E' on all angle fillets by brush.
Supply and fix for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including all necessary fittings as in cupboard shutter including taking down existing particle board shutter complete all as specified and as directed by Engineer-in-Charge.
Material and labour for WPT external walls and chajjas by applying two coats of elastomeric coating material after cleaning the surfaces and exposing and opening all visible cracks thoroughly and cealing all with acrylic sealing compound as per manufacturer specification and direction of EIC. MAKE :- Dr fixit or equivalent as approved by GE
Providing and fixing of factory made fibre glass reinforced plastic (FRP)''CHAJJA", 4 mm thick of 'Fibreway' brand or equivalent in required colour, size and design made by Resin transfer moulding (RTM) machine technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically 1 Nos horizontally 50x2 mm thick M.S.flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necesssary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS:11551 complete with protective Gelcoat U/V coating on top for complete resistance from the extreme of temperature, weather & sun light complete all as directed by Engr-in-Charge and as specified.
Material and labour for cleaning treatment of external walls of stone masonary by applying 1 coat Sagatech SC @ 2.5 litre per Sqm (Stone and stone masonry cleaner) Make Saga polymer only ( approved by trial) or equivalent after cleaning the surface throughly and sealing all the pointing with cement and sand mortar with water proofing additive as per the manufacturers specification and direction of Engr-in-charge.
Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter without taking off shutter from the frame and removing from site complete all as specified and as directed by Engineer-in-Charge.
Taking down Shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.
Supply and fix for factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. MAKE :- Rajshri/Sintex/Accucel/Duraplast
Material and labour for pressed steel door frame for doors of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for pressed steel door frame for doors of size 125 x 60mm with double rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for 30mm thick second class hard wood glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without such bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of shutters including wire mesh as specified in SSR-I, Section 8.24(a) supplied and fitted to Chowkats.
Supply and fix for 35mm thick plain framed panelled factory made door shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads complete all as specified and as directed.
Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads complete all as specified and as directed.
Supply and fix aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.
Supply and fix 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.
Supply and fix aluminium alloy anodised handle, cast type 150mm long complete all as specified and as directed.
Supply and fix aluminium powder coated window sliding type (three track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x 17.70x1.2mm thick with and including two glass shutter and one wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick sheet glass and 0.36mm dia apperture 1.4mm stainless steel wire mesh and fittings etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick pin headed glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.
Supply and fix in repair 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.
Supply and fix in repair PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.
Supply and fix in repair PVC (SWR) branch piece, double (double Y) 110 mm dia equal or unequal complete all as specified and as directed.
Supply and fix in repair 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.
Supply and fix in repair 110mm bore PVC (SWR) junction double (double T) equal or unequal complete all as specified and as directed.
Supply and fix in repair 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fix in repair 125/110 mm PVC (SWR) 'P’ trap complete all as specified and as directed.
Supply and fix in repair 125/110 mm PVC (SWR) 'S’ trap complete all as specified and as directed.
Supply and fix in repair 110mm PVC (SWR) WC connector any type complete all as specified and as directed.
Supply and fix in repair 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.
Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.
Supply and fix in repair cast iron sanitary connection socket to fit WC out-let of any size and shape complete all as specified and as directed.
Dismantling Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed.
Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and as directed.
Disconnecting existing tanks n exc 500 litre capacity,setting aside (or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position as same complete all as specified and as directed.
Supply and Fix in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm (23" approx) white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per Prayag Cat Part No 4055 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.
Material and labour for vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern and flush pipe) all as per Prayag cat Part No.4018 or 4019 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified and as directed.
Supply and Fix in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
Supply and fix in repair vitreous china one piece wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and 800mm long PVC waste pipe and other fittings complete all as specified and as directed. MAKE :- Prayag Cat Part No 4645 or technocommercially equivalent
Material and labour Kitchen sink for kitchen or laboratory overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm made out of stainless steel 1mm thick kitchen or laboratary sink with plugs, washers and waste including bedding in mortar on to dwarf wall, fixing cantilever brackets and connecting union pipes including taking down the existing sink complete all as specified and as directed.
Taking up or down existing steel tubing 15mm bore dia and connections including cleaning for refixing or removal to stores complete all as specified and as directed.
Taking up or down existing steel tubing 20mm bore dia and connections including cleaning for refixing or removal to stores complete all as specified and directed.
Supply and fix for tubes medium grade 15 mm bore galvanised with all fitting fixed complete to wall and celiligs or laid in trenches complete all as specified and directed.
Supply and fix for tubes medium grade 20 mm bore galvanised with all fitting fixed complete to wall and celiligs or laid in trenches complete all as specified and directed.
Refixing 15mm or 20 mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) including taking up or down existing steel tubing 15 or 20mm bore dia and connections including cleaning for refixing complete all as specified and directed.
Supply and fix UPVC pipe 40mm bore as in water spouts pipe complete all as specified and as directed.
Supply and fix in repairs CP shower rose 125mm square with arm and flange including fixing to steel pipe complete all as per Prayag Cat Part No BS-66 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Material and labour Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in floor, plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engr-in-Charge.
Supply and fix rotational moulded polyethylene water storage tank three Layer cylindrical vertical with top closed hoisted and fixed in position capacity 500 ltrs including Dismantling existing tanks, exc 250 ltr and n exc 500 ltr removing to store complete all as specified and as directed.
Supply and fix rotational moulded polyethylene water storage tank three layer cylindrical vertical with top closed hoisted and fixed in position capacity 1000 ltrs including Dismantling existing tanks, exc 500 ltr and n exc1000 ltr removing to store complete all as specified and as directed.
Supply and fix in repair bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 8306 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix in repair bib taps standard of PTMT, any colour screwed for iron pipe suitable for 15mm dia all as per Prayag Cat No 121-E Grand series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix stop valve, 15mm/20mm dia, cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure, screw down, screwed both ends for iron pipe or for brass ferrule all as per Prayag Cat No 7326/7318/7320 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix in repair pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repair Stop valve 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15m m-90gms/20mm-112gms) complete all as per Prayag Cat Part No 1411 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repair 15/20 mm dia Ball valves, high pressure with polythene float and flynut with rod complete screwed for iron pipe or brass ferrule complete all as specified and as directed. MAKE :- Prayag Cat Part No 151 or 152 or technocommercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix in repairs 32/40 mm bore and 800mm long PVC waste pipe suitable for WHB, Urinals etc all as per Prayag Cat No 3271 or 3281 or technocommercially equivalent make complete all as specified and directed.
Supply and fix PVC valveless, syphonic action type, Smart flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per Prayag cat Part No.501 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified and as directed.
Supply and fix in repair covers for PVC tanks any make and for capacity upto 500 ltr with screws including locking device complete all as specified and as directed.
Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chajjas, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20 mm graded stone aggregate.) in chajjas etc. complete all as specified and as directed.
Material and labour form work to flat surface of chullah hoods, chajjas, troughs and similar items fair finished surfaces square, rectangular or polygonal complete all as specificed and as directed.
Demolition of reinforced cement concrete of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.
Material and labour for cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof, chajjas, kerbs or mud stops, rounded or chamfered on edges giving proper slope complete all as specified and as directed.
Supply and fix in repair Harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
Supply and fix 0.63 mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, including dismantling existing unserviceable sheet of any description complete all as specified and as directed.
Demolition of Plain Cement concrete in ground floors or below ground floors and pavings n.exc 15cm thick of any description all as specified and as directed by Engr-in-Charge.
Material and labour for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments set and jointed of approved design & pattern as approved by GE over & including 40mm thick sand cushion, complete all as specified and as directed.
Material and labour for 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone agg) as in sub base complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and sides of path complete all as specified and as diected.
Material and labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base course complete all as specified and as directed.
Material and labour for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments over and including 20mm thick cement screed base (1:6) complete all as directed by Engr-in-charge.
Dismantling of stone slabs, interlocking paver block and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.
Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing roof sheet of any descriptin complete all as specified and as directed by Engr-in-Charge.
Supply and fix for Fe 410 W(Gde-E-250) quality A rolled mild steel as in roof trusses (framed), trussed, poles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr-in-Charge.
S P DEVELOPERS
MAHESH DADAJI BACHHAV
MANIYA CONSTRUCTION CO
S.R.M.K Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .