REPAIR MAINTENANCE OF INTERNAL ELECTRIFICATION INCL FITTINGS AND FIXTURES WITH CONNECTED ITEMS WORKS INCL INTERNAL WIRING SUBMAIN WIRING DISTRIBUTION BOARDS MCBS AT JCOS ORS MD ACCN AND MISC OTHER EM WORKS AT NARAYANA COMPLEX UNDER GE N DELHI CANTT 1

Amount

Taking down carefully old unserviceable point wiring complete including fittings such as switches, conduit, wires,celling roses, light fittings etc and making good the disturbed surface complete all as specified and directed.

M&L for point wiring with single core fire retardant low smoke (FRLS) PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including sheet metal concealed boxes, cover plate, joint boxes etc complete all as specified and directed for One light /fan/ bell point controlled by one, one way switch 06 Amps complete all as specified and directed.

All as per the description of srl No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per the description of srl No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per the description of srl No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, on above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

M&L point wiring with PVC insulated unsheathed multistranded copper conductor, conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

One light point controlled by one way switch 5/6 amps.

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the independent board

One socket out let 5/6 amps point on the same board

One bell/buzzer point controlled by one bell push button

One light point controlled by two 2 way switches

All as per the description of srl No 06 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.

S&F in repairs switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F in repairs of switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

S&F in repairs socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.

S&F in repairs Switch socket combination 3 pin 16A, multi pin, flush type complete all as specified and directed.

S&F in repairs bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed.

S&F in repairs of call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&F in reapirs lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F in repairs deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.

S&F in repairs on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed.

S&F in repair 9/10W LED tube light fitting (2 feet) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs decorative luminiare suitable for wall light fixture including LED lamp 1x7 to 12 watt ( B-22 base), made of Polycarbonate with acrylic decorative diffuser and provision of PVC insulated sheathed round flexible wire with multi stranded copper conductor of size 1.50 Sqmm two core complete all as specified and directed.

S&F in repairs industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in repairs sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

S&F in repairs of MCB, single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and directed.

S&F in repairs MCB, DP, AC, 240 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F in repairs MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 63 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 40 Amps, 02 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

M&L for sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete all as specified & directed. NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

M & L Sub main wiring in existing conduit with two run single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into existing PVC conduit of size 25 mm medium grade size, making good the disturbed surfaces complete.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and unsv Ex fan depositing in E/M store yard complete all as specified & directed.

S&F PVC body ventilating fan wall mounted type of 200mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete all as specified & directed.

S&F in repairs 40 Amps 4 Pole 30 mA RCCB add on block 10 KA rated conditional short circuit current (Icc) 35 sqmm terminals, dual position DIN Clip, confirming to IEC 60947-2 and 40 Amps single pole 'C' type MCB Confirming to IS/CE Marked as per IS/IEC60898-1, rated short circuit breaking capacity Icn 10 KA, enerergy limitation class 3, line load reversiblity, 35 sqmm terminals, biconnect terminals all as specified and directed. Make : Indo Asian cat part No: 811701 or equivalent in Legrand/L&T as approved by GE.

Supply installation testing and comissioning of building common area panel including Contactor, Analog time switch, MCB rating 40 Amps suitable for 3 phase 415 volts and having over and under voltage protection relay to protect the contactor coil, outdoor with panel locking facility, wall/floor mounted type including necessary cable lugs and gland in repairs all as specified and directed . Make : Indo Asian cat part No:TLO40AB0 or equivalent in Schneider/Hager/Seimens

S&F in repairs of 3mm thick plastic laminated sheet cover with brass screws , cup wahser and cutting of grooves for switchs,scoket and regulator etc complete for following sizes as directed by engr-in-charge .

S&F in replacement of concealed metal box 06/08 modules having high durability, corrosion resistant,earthing terminal with repalcement of 3 mm thick plastic laminated hylam sheet top cover with brass screws , cup wahser and cutting of grooves for switchs,sockets and regulator etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note: Switch,sockets,regulators to be measured and paid separately

All as per the description of srl No 37 but 03/04 modules complete.

All as perthe description of srl No 37 but 01/02 modules complete.

M&L for servicing, descaling with descaling agents (chemical solvents) for removing all silt/rust of the solar water heater 500 LPD capacity solar water heating system and making good any leakages, replacement of gaskets etc testing complete and making the plant functional including replacement of minor spares parts for complete system (rubber gaskets 63 mm dia, flange dummy 63mm dia, flange brass dia 63 mm dia, hose clamps suitable sizesflange pieces, descaling agent, glass rubber beedings and if any minor spares reqd etc.,) complete all as specified and directed. Note: Rates deemed to be included in minor spares as above mentioned complete.

M&L for hose pipe (EPDM) size 25mm inner dia and 36mm outer dia suitable for solar hot water system including taking down unserviceable complete all as specified and directed.

M&L for toughened glass 2000mm x 1000mm suitable thickness as per existing size ISI marked suitable for solar hot water system including taking down unserviceable complete all as specified and directed.

M&L for solar plate collector flat type of capacity 100 ltrs, ISI marked including cover plate, collector box, absorber, suitable insulation including taking down unserviceable complete all as specified and directed.

M&L for cylindrical type hot water tank of capacity 500 ltrs made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet including taking down unserviceable complete all as specified and directed.

M&L for taking down hot water tank 500 ltrs capacity and replacement of PUF insulation 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet and refixing the same complete all as specified and directed.

S&F temparature gauge ISI marked dial type having range 0 to 100 ºC including taking down unserviceable complete all as specified and directed.

M&L for water make up tank of 15 ltrs capacity made of 1.6mm thick mild steel sheet, painting 2 coats of synthetic enamel paint surface & inner surface shall be painted with 02 coat of black bituminous paint including taking down unserciveable complete all as specified and directed.

S&F PVC ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, ISI marked,15mm bore complete assembly screwed for iron pipe and fixed and taking out unserviceable complete all specified and directed.

M&L for lagging to hot water pipes all round with nitryl rubber insulation 9mm thick with 26 SWG aluminium cladding system only for open surface 15/20mm bore pipe work portion upto eight storeys height high rise bldgs and conforming to IS 9842 complete including taking down unserviceable complete all as specified and directed.

M&L for MS angle iron, flats, plates, clamps including nuts, bolts, washers, welding, bending, drilling holes for bolts in any shape or size as indicated or directed of making staging of the hot water tank and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer including preparation of steel surface including taking down old unserviceable one complete all as specified and directed.

Supply and laying galvanised steel water tubing medium grade 15mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends, elbow, tees, short pieces, connectors, caps, plugs and unions etc) and fixing complete with clips,wall hooks wooden plugs,etc also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed. Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8 th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work.

Supply and fixing gun metal gate valve 15mm dia screwed down high pressure with iron wheel head, screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

Supply and laying galvanised steel water tubing medium grade 50mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends, elbow, tees, short pieces, connectors, caps, plugs and unions,etc) and fixing complete with clips, wall hooks wooden plugs ,etc., also cutting, screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed. Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8 th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work.

S&F gun metal gate valve 50mm dia screwed down high pressure with iron wheel head ,screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

M&L for cutting of existing GI Pipe line up to 50mm dia for taking branch connection by necessary cutting/threading including suitable fittings such as union, elbows, tea etc for by pass of solar water line work complete all as directed at site.

S&F in repairs copper tubing 12.5mm to 15mm dia for solar hot water system including taking down unserviceable complete all as specified and directed

S&F in repairs for copper tubing 20mm dia for solar hot water system including taking down unserviceable complete all as specified and directed.

M/s S.G. BUILDERS

M/s Prakash Enterprises

M/s Sohanil Construction

Microsys Controls India

MOHIT ENTERPRISES

Surjit and Sons

Shiv Enterprises