Spl repair to fire hydrant and fire alarm system of Military Hospital at Suratgarh Mil Stn

Amount

Supply, installation, Testing, Commissioning in replacement of 8 Zone Fire Alarm Control Panel, with 16X2 Charater LCD Display, including taking down old unserviceable control panel complete all as specified and directed. Make : Ravel/DY AGNI /Simplex/Honeywell (i) Panel Approved By ISO, STQC & ERTL (ii) Panel Also Have Auo Dialer facilty (iii) Panel Must Have Zone wise Fire Fault LED indication (iv) provision to connect repeater Panel through RS-485 port

Supply, installation, Testing, Commissioning in replacement of Optical Photo / Smoke Detector with base complete all as specified and directed. Make : Ravel/DY AGNI /Simplex/Honeywell

Supply, installation, Testing, Commissioning in replacement of Conventional Sounder with 24V DC, Audiable Sound 75 db @ 1 mtr range (16 V DC) used for Fire, Burglar & Emergency Alarm System, Low current consume 2 different tone audiable sound including taking down old conventional sounder complete all as specified and directed. Make: Ravel /DY AGNI /Simplex/Honeywell

Supply, Installation, Testing, Commissioning in replacement of Response Indicator complete all as specified and direceted. Make : Ravel/DY AGNI /Simplex/Honeywell

Supply and fixing in replacement of Battery 12 Volts 7 AH in Fire alarm Panels complete all as specified and directed. Make : Exide/ Amron/ Luminous

Supply, Installation, Testing, Commissioning in replacement of Manual Pull Station - Single Action Red in Color complete all as specified and directed. Make: Ravel /DY AGNI /Simplex/Honeywell

Supply, laying & Terminations in replacement of 2 Core 1.5 sqmm PVC cable complete all as specified and directed. Make:- Finolex, havells, Polycab, RR cable

Supply, Laying & Fixing in replacement of PVC Conduit 20mm complete all as specified and directed. Make:- AKG/ Kalinga/ BEC or Eqivalant

M&L for repairing/servicing the Electric induction motor and centrifugal pump coupled type by carefully disconnecting the connection cables and earthings, disconnection of electric, water supply connections both side (suction and discharge side) and fixing of dummy plates as per site requirement. Removing side covers, servicing, greasing, changing of gland packing, gaskets, defective minor parts and re-assembling, testing, preparing the surfaces of the motor and pump for painting with two coats of synthetic enamel paint and commissioning the motor and pump of capacity 68 HP to the satisfaction of Engr-in-Charge. Note: (i) The rent of T&P for handling the pump motor assembly during dismantling and refixing is deemed to be included in the rate quoted by contatcor. (ii) Major spare parts of motor will be measured and paid separately under following respective items.

M&L for repairing/servicing the electric induction motor and centrifugal pump coupled type by carefully disconnecting the connection cables and earthings, disconnection of electric, water supply connections both side (suction and discharge side) and fixing of dummy plates as per site requirement. Removing side covers, servicing, greasing, changing of gland packing, gaskets, defective minor parts and re-assembling, testing, preparing the surfaces of the motor and pump for painting with two coats of synthetic enamel paint and commissioning the motor and pump of capacity 10/12.5 HP to the satisfaction of Engr-in-Charge. Note : (i) The rent of T&P for handling the pump motor assembly during dismantling and refixing is deemed to be included in the rate quoted by contatcor. (ii) Major spare parts of motor will be measured and paid separately under following respective items.

Supply and replacing of following under mentioned worn out U/S parts of centrifugal 68 HP pumping set :-

Gland bush

Ball bearing

Roller bearing

Supply and replacing of following under mentioned worn out U/S parts of centrifugal 10 HP /12.5 pumping set :-

Gland bush

Ball bearing

Roller bearing

M&L for Over Hauling maintenance and servicing to 4 cylinder, 55 KW Diesel engine for 'B' check as per the recommendations of manufacturer (OEM) including renewal of necessary recommended filters, engine oil, 'O' rings etc., complete all as directed by Engineer-in-charge.

S&F in replacement of fuel pump of DG set engine 55 KW as per existing make, model and capacity complete all as per existing make, model and capacity complete all as directed by Enginner-in-Charge.

S&F in replacement of NRV of DG set engine as per existing make, model and size complete all as directed by Engineer-In-Charge.

Cleaning of Terrace water storage Tank of capacity 20000 litre first with plain water and then with the bleaching powder white wash of the inner surface with the lime complete all as directed by the Engineer-in-Charge. Note: The Job shall be completed within 8 hours to avoid any interruption in the system

Material and labour for preparing of old steel surfaces and applying two coats of synthetic enamel paint of existing colour for fire fighting equipment DD Pump, valves, pipes, hose box, hose drum etc with two coats of synthetic enamel paint of existing colour in Military Hospital Fire Fighting Pump System complete all as specified and directed. Note : Prior Approval of colour sample of paint should be taken from Engineer-in-Charge before applying.

Supply & fixing in replacement of Cast Iron butterfly valve class ‘PN-1.6’ with SS-304 disc of 150mm bore, ISI marked, both flanged ends and drilled, gear operated having nitrile lining with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing complete all as specified & directed.

Supply & fixing in replacement of Cast Iron butterfly valve class ‘PN-1.6’ with SS-304 disc of 100mm bore, ISI marked, both flanged ends and drilled, gear operated having nitrile lining with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing complete all as specified & directed.

Supply & fixing in replacement of Cast Iron butterfly valve class ‘PN-1.6’ with SS-304 disc of 80mm bore, ISI marked, both flanged ends and drilled, gear operated having nitrile lining with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing complete all as specified & directed.

Supply & fixing in replacement of Cast Iron butterfly valve class ‘PN-1.6’ with SS-304 disc of 65mm bore, ISI marked, both flanged ends and drilled, gear operated having nitrile lining with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing complete all as specified & directed.

Supply & fixing in replacement of Cast Iron butterfly valve class ‘PN-1.6’ with SS-304 disc of 50mm bore, ISI marked, both flanged ends and drilled, gear operated having nitrile lining with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing complete all as specified & directed.

M&L for servicing single head fire hydrant/ any type fire brigade of any size taking out, checking out for any obstructions to the functioning of hydrant, servicing, replacement of damaged parts/accessories, like bolts & nuts, rubber gaskets, hydrant nozzel etc complete all as directed and directed.

Supply and fixing in replacement of foot valve of size 150mm dia with suitable strainer complete all as specified and directed. Make : Zoloto/ Kartar/ Kiloskar

Supply and fixing in replacement of foot valve of size 100mm dia with suitable strainer complete all as specified and directed. Make : Zoloto/ Kartar/ Kiloskar

Supply and fixing in replacement of foot valve of size 80mm dia with suitable strainer complete all as specified and directed. Make : Zoloto/ Kartar/ Kiloskar

S&F 25mm bore Gun metal threaded valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25mm bore, complete all as specified & directed.

S&F 50mm bore Gun metal threaded valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50mm bore, complete all as specified & directed.

S&F in replacement of MS pipe 150mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement of MS pipe 100mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement of MS pipe 80mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement of MS pipe 65mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement of MS pipe 50mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement of MS pipe 40mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement of MS pipe 25mm bore medium grade Class 'B' (ISI Marked) for pumping set suction line/ discharge water line including with necessary fittings sch as bend, elbow, tee, socket including cutting, threading, welding etc and replacement of wornout, MS nut, bolts, washers & sockets flange etc including complete painting with two coat of bituminous paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement pressure switch universal type Make Denfoss/ Indofoss complete all as specified and directed

S&F in replacement of 63mm dia 30 metre long hose conforming to IS-636 complete with male and female coupling complete all as specified and directed. Make : Kartar/ Zoloto

S&F in replacement of Hose box made of 18 gauge MS Sheet 800mm X 600mm X 200mm with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet with lock and keys suitable to accommodate two canvas fire hose of dia 63mm dia, length 15 meter painted fire red out side and brilliant white inside yard for indoor application complete all as specified and directed. Make : Omex/Agni/Newage/

Supply and fixing in replacement of hose reel Pipe 20/25mm dia, 30 metre length complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of 63mm dia 15 metre long hose conforming to IS-636 complete with male and female coupling conforming to IS-903 complete all as specified and directed Make : Kartar/ Zoloto/ Newage

M&L for branch pipe Stainless Steel 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle long complete all as specified and directed. Make : Kartar/ Zoloto/ Newage/Agni

Supply, installation, testing of 15mm dia Gun metal body chrome finish QB sprinklers of 68 Deg. C operating temperature pendent type complete all as specified and directed. Make : TYCO/ HD/ AGNI

M&L for replacement of Single Way 63mm Hydrant Valve made out of Stainless Steel complete all as specified and directed. Make Kartar/ Zoloto/ Newage/Agni

M&L for sevicing of Automatic Fire Fightining Panel by checking all electric connection, Battery Charging Unit, Replacing all unserviceable parts and making the panel serviceable for automatic operation complete all as directed. Note:- The quoted rate includes the cost all unserviceable parts required to make the panel serviceable for automatic operation, nothing extra will be paid on this account.

S&F in replacemnt electrical starter panel for 10 HP, 3 Phase, motor complete all as directed. Make : L&T/Schneider/ABB

S&F in replacement Bell alarm valve for sprinkler system complete all as specified and directed.

S&F in replacement Deluge Valve for sprinkler system complete all as specified and directed.

S&F in replacement of air release valve 25mm complete all as specified and directed. Make : Kartar/ Zoloto/ Leader/Agni

Supply, installation and commissioning in replacement of suitable pressure vessel for Fire Fighting System complete all as specified and directed

Testing of Entire Fire Fighting and fire alarm System external and internal and submission of complete drawing of entire fire fighting system complete all as directed.

Cleaning of U/G sump of capacity 50000 Gln first with plain water and then with the bleaching powder white wash of the inner surface with the lime complete all as directed by the Engineer-in-Charge. Note:- The job shall be completed within 8 hrs to avoid any interruption in the system

Continental Engineers and contractors (BID ID -3203785)