CONSTRUCTION OF ANGANWADI CENTER & POVIDING BASIC FACILITIES AT NADI SINNUR VILLAGE OF AFZALPUR CONSTITUENCY IN KALABURAGI TALUKA UNDER KKRDB MICRO GENERAL FOR THE YEAR 2024-25 (KLB2412213179)

CONSTRUCTION OF ANGANWADI CENTER & POVIDING BASIC FACILITIES AT NADI SINNUR VILLAGE OF AFZALPUR CONSTITUENCY IN KALABURAGI TALUKA UNDER KKRDB MICRO GENERAL FOR THE YEAR 2024-25

Earth work excavation by manual means for drains,canals, waste weir draft,

approach channels, key trench, foundation of Bridges and such similar works,

as per drawing and technical specifications, inc...

Providing and Filling in foundation with granite / trap broken metal 100mm. and

down size & with approved sand including hand packing, ramming, watering,

including cost of all materials and labour wit...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Foundation upto Plinth All other types add 3%

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Plinth Beams of Buildings add 50%

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts of Buildings add 60%

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for RCC Roof Slabs add 50%

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of

minor sections add 45%

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing Mathi/Nandi wood frames of doors, windows, clerestory

windows, ventilators and other frames, wrought, framed or assembled

including making plaster groves (excluding cost of cement concrete a...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Applying priming coat: With ready mixed red oxide zinc chromate

primer of approved brand and manufacture on steel galvanised iron/

steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Fixing of window frame in an existing opening including embedding frame

in floor and walls after cutting masonry for holdfasts for embedding

holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Providing and laying Polished Glazed Vitrified tiles with thickness 10

mm in floor with different sizes with water absorption less than 0.08%

and conforming to IS:15622, of approved brand & manufactur...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness

to be specified by the manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Providing and fixing in position Mathi / Nandi wood fully panelled shutters

for windows with stiles and rails of 25mm. thick, 75mm wide in two

halves with panels of 20mm thick including cost of materi...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,

with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Finishing walls with textured exterior paint of required shade :New work

(Two coats applied @ 3.28 L/10 m²) over and including priming coat of

exterior primer applied @ 2.20kg/10 m² to give an even ...

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including

water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, ...

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Providing and laying water proofing treatment to the Roof with PU based

single component elastomeric pure polyurethane based coating on New

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Water purification plants: Providing, Installation and Commissioning of

automatic Water purification plant (RO+UF) with all accessories piping,

product water tank on single phase power supply as per t...

Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and

compacted to mee...

Construction of Granular Sub-Base of required grading as per

design spreading in uniform layers with motor grader on

prepared surface mixing by mix in place method with front end

loader at OMC and com...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and laying 60mm thick factory made precast M -30

grade Cement Concrete Paver Block as per IRC SP 63:2018 &

IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved

shape and colour, laid...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing wall black boards in 12mm thick with CM 1:3 and applied with

primer & two coats of acrylic emulsion black paint including finishing

SINKING OF BOREWELL

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe

grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part-

II) 1982 with all latest amendments if any for any dia. The thickness

of plate used for covering one end shall be 3mm (minimum...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)

suitable for bore well confirming to IS 8034-2000 specifications, to work

site with testing of as per instructions of engineer incha...

Supply and delivery at site Stringing of heavy duty Naylone/PP rope with

ISI etc complete suitable for Single phase Pumpsets

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying

to work site including loading and unloading at both destinations and

Supply and delivery at site Brand new best make PVC insulated cable of

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

with ISI Mark and as per its latest amendments. 1x3x1.5...

Labour charges for Erection, Electrification and commissioning of Pump

sets, including aligning and balancing of all items including supply and

erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of indoor type panel board and meter board

units with all necessary materials and labour tools and equipments

including cement concrete for foundation/bed etc,complete as p...

Fixing a shunt capacitor of. kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. upto 5 kVAR

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20" x 2...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energycross-3 with Short circuit breaking capaci...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

ELECTRIFICATION WORK

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,

metal/PVC junction boxes, adhesive paste etc., and runningbefore ...

Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x17...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

Supplying and wiring adopting loop system in existing PVC Conduit/casingcappingusing2x1.5Sqmm(Phase & Neutral)&1x1.0sqmm(Earth wire) FRLS multi strand PVC insulated copper wire(confirmingtoIS-694:andl...

SupplyingandwiringadoptingloopsysteminexistingPVCConduit/casingcappingusing2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLSmultistrandPVCinsulatedcopperwire(confirmingtoIS-694:andlatestamendments)wit...

Supplying and drawing Flexible Multicore Cable

manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5S...

Supplying and drawing Flexible Multicore Cable

manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5S...

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, ...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase /...